• 제목/요약/키워드: Mg-foil

검색결과 26건 처리시간 0.022초

거대자기저항 스핀밸브 소자를 이용한 음용수 미네랄 Mg 용해센서 특성 연구 (Characteristics of Mineral Mg Dissolving Sensor in Edible Water using GMR-SV Device)

  • 이주희;김다운;김민지;박광서;강준호;이상석
    • 한국자기학회지
    • /
    • 제18권5호
    • /
    • pp.174-179
    • /
    • 2008
  • 자장감응도가 약 0.8 %/Oe인 거대자기저항-스핀밸브(GMR-SV) 소자를 이용하여 두께 200 nm의 Mg-박막과 두께 $50\;{\mu}m$의 Mg- 포일이 물속에서 녹는 Mg 용해도 측정 센서 시스템을 제작하였다. Mg-박막과 Mg-포일이 각각 용해할 때, 증가하는 저항으로 인한 전류 감소가 솔레노이드 내부의 자기장의 변화를 일으켜 GMR-SV 센서로 감지되었다. Mg이 음용수와 반응하여 발생하는 방울수와 산화환원전위(ORP)의 시간 변화율을 측정하여 일반 수돗물과 증류수의 것과 비교하였다. 미네랄 Mg함량이 다른 3가지 물에서 Mg 용해속도가 큰 차이를 보였다. 또한 Mg-박막 일 경우, 출력신호의 자기저항 값이 최소 $43.6\;{\Omega}$로 떨어졌으며 자기저항의 급격한 변화가 5분 이내에 나타났고, 그 변화율은 ${\Delta}R/{\Delta}t=0.18\;{\Omega}/min$ 이었다. Mg-포일 일 경우, 20분 이내에 $0.3\;{\Omega}/min$이었다. 음용수에 담긴 Mg-박막이나 Mg-포일의 용해시간과 용해속도를 측정하여 알칼리 환원수로 변환을 감지하는 미네랄 Mg 용해센서 개발이 가능할 것으로 사료된다.

Influence of Mg Vapor Pressure on the $MgB_2$/Carbon Fiber Fabricated by Physical Vapor Deposition method

  • Li, Xiang;Ha, Hong-Soo;Kim, Cheol-Jin
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제13권4호
    • /
    • pp.5-9
    • /
    • 2011
  • We have fabricated the superconducting $MgB_2$/carbon fiber by physical vapor deposition method. Mg (Magnesium) and B (Boron) were simultaneously deposited on the carbon fiber using the RF-sputtering and thermal evaporation, respectively. To ensure the relatively high vapor pressure of Mg at the growth region and the subsequent phase stability of $MgB_2$ at the deposition temperature, inverted funnel-like guide made of Mg-foil was employed while one side of the guide were open for the sputtered B flux. Mg vapor pressure should be controlled precisely to secure the complete reaction. The $MgB_2$/carbon fiber showed a uniformly deposited thin layer with dense and well-formed grains. The $MgB_2$/carbon fibers in this study showed $T_c$~37.5K, $J_c$ ~ $2{\times}10^4\;A/cm^2$ in the 20K, 0T.

MgO-Al2O3-SiO2계 요업원료(Mullite, Spinel, Cordierite)의 제조 및 소결특성 II. Alkoxide로 제조한 Mg-Al Spinel분말 및 소결체의 특성 (Fabrication and Sintering Characteristic of MgO-Al2O3-SiO2 System Ceramic Raw Materials(Mullite, Spinel and Cordierite) II. Powder and Mechanical Properties of Mg-Al Spinel Ceramics Prepared by Alkoxide)

  • 김창은;이홍림;안용진;김배연
    • 한국세라믹학회지
    • /
    • 제26권5호
    • /
    • pp.593-600
    • /
    • 1989
  • Fine spinel powder was prepared from the Mg-Al double alkoxide synthesized using magnesium powder, aluminum foil and sec-butyl alcohol. This powder was compared with powder prepared by mixing two commercial alkoxides. The spinelization was started at 50$0^{\circ}C$ and was almost completed at 100$0^{\circ}C$ with a good crystallinity in the double alkoxide system. In mixed alkoxide system, homogeneous spinel powder was not obtained and MgO existed as a second phase because of solubility and hydrolysis rate differences of two alkoxides. The relative density of specimen prepared by double alkoxide was 99% and specimen prepared by mixed alkoxide was 95%. The modulus of rupture of specimens prepared by double alkoxide and mixed alkoxide was 49.9kg/$\textrm{mm}^2$ and 41.6kg/$\textrm{mm}^2$, respectively.

  • PDF

마그네슘 금속으로부터의 산화마그네슘 나노와이어 제조 (Preparation of Magnesium Oxide Nanowires from a Magnesium Foil)

  • 이병건;최진섭
    • 공업화학
    • /
    • 제22권5호
    • /
    • pp.514-517
    • /
    • 2011
  • 본 실험에서는 옥살산과 알코올계 용매를 사용하여 마그네슘 호일의 화학적 식각에 의해서 마그네슘 옥살레이트(Magnesium oxalate) 나노구조를 제조하였다. 알코올계 용매 중 에탄올 용매에서 마그네슘 옥살레이트 나노와이어를 얻을 수 있었다. 시간에 따른 나노와이어의 형성 과정을 살펴보았고, FE-SEM을 통하여 형상을 살펴보았다. TGA 분석을 통하여 열처리 조건을 결정하였다. 열처리를 통하여 마그네슘 옥살레이트 나노와이어에서 산화마그네슘(MgO) 나노와이어로 전환시켰고, 이를 FE-SEM과 FT-IR을 통하여 확인하였다.

아산 명암리 밖지므레 유적 출토 유리구슬의 화학적 특성 (Chemical Characteristic of Glass Beads Excavated from Bakjimeure Site in Asan, Korea)

  • 김나영;김규호
    • 보존과학회지
    • /
    • 제28권3호
    • /
    • pp.205-216
    • /
    • 2012
  • 아산 밖지므레 유적 마한 분묘에서 출토된 유리 65점은 포타쉬유리군이 13점, 소다유리군이 52점으로 소다유리군이 우세하게 나타났다. 색상별로 세분하면, 감청색 유리는 포타쉬유리군과 소다유리군이 공반되는 반면 자색 유리는 포타쉬유리군이고 적색, 벽색, 녹색, 금박유리는 소다유리군으로 나타났다. 감청색 유리는 안정제의 함량이 낮은 LCA계이고 이중에 소다유리는 MgO와 $K_2O$ 함량이 낮은 LMK형으로 천연탄산소다가 원료로 사용된 것으로 판단된다. 적색 유리는 균질한 유리가 LCA-B계/HMK형이고 불균질한 유리가 HCLA계/LMK형으로 각각 해양 식물 재와 천연탄산소다가 사용되었을 가능성이 있다. 벽색과 녹색 유리는 환옥이 LCA-A계/LMHK형이고 연주옥이 LCA-B계/HMK형으로 형태에 따라 차이를 보인다. 금박구슬은 19.9~22.6K의 순도를 갖는 금박과 HCLA계/LMK형의 소다유리로 제작되었다. 즉, 아산 밖지므레 유적 유리구슬 대부분은 백제시대 타 유적에서 확인되는 유리 조성과 유사성이 높은 편이나 벽색 및 녹색 연주옥과 일부 적색 환옥은 다른 화학 조성을 보이므로 원료에 차이가 있음을 알 수 있다. 이와 같은 특성은 고대유리의 교역 체계 이해를 위한 중요한 단서를 제공할 것으로 기대된다.

Growth of superconducting $MgB_2$ fibers for wire applications

  • Kim J. H.;Yoon H. R.;Jo W.
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제7권4호
    • /
    • pp.1-3
    • /
    • 2005
  • Superconducting $MgB_2$ fibers are in-situ grown by a diffusion method. The fibers are prepared by exposing B filaments to Mg vapor inside a folded Ta foil over a wide range of temperature and growth time. The materials are sealed inside a quartz tube by gas welding. The as - grown fibers are characterized by scanning electron microscopy and energy dispersive x - ray analysis. The fibers have a diameter of about $110{\mu}m$. Surface morphology of the fibers looks dependent on growth temperature and mixing ratio of Mg and B. Radial distribution of Mg ions into B is observed and analyzed over the cross - sectional area. Transport properties of the $MgB_2$ fibers are examined by a physical property measurement system. The $MgB_2$ fibers grown at $900^{\circ}C$ for 2 hours show a superconducting transition at 39.8K with ${\Delta}T_c<$ 2.0 K. Resistance at room temperature $MgB_2$ is 3.745 $\Omega$ and residual resistivity ratio (RRR) is estimated as 4.723.

Fabrication of Ultra Fine MgO Particles Added BSCCO 2223 Tapes with Different Precursor Phase Constituent

  • Ko, Jae-Woong;Yoo, Jai-Moo;Kim, Hai-Doo;Chung, Hyung-Sik
    • Progress in Superconductivity
    • /
    • 제1권1호
    • /
    • pp.56-60
    • /
    • 1999
  • Ultra fine MgO particles added BSCCO tapes were fabricated by tape casting using Doctor Blade Method and enclosed by silver foil for different starting compositions (that is, 2223 major, 2212 major). In order to obtain optimum microstructure, thermomechanical treatment was done. Microstructure and phase were analyzed by XRD, SEM and DTA. The critical current density was measured under magnetic field at 77K. The tapes fabricated from the precursor powder with BSCCO-2223 phase (>90%) result in a microstructure with a larger grain size and higher transport critical current density value under magnetic field at given thermomechanical treatment conditions.

  • PDF

꽃사과(Malus prunifolia Wild. Borkh. "Red Fruit")에서 에탄올 추출한 안토시안 색소의 안정성 (Stabilities of Anthocyanin Pigmenta obtained from Crab Apple (Malus prunifolia Wild. Borkh. "Red Fruit") by Ethanol Extraction)

  • 김용환
    • 한국식품영양학회지
    • /
    • 제12권1호
    • /
    • pp.85-90
    • /
    • 1999
  • The characcteristics of anthocyanin pigments from crab apple (Malus prunifolia Wild. Borkh. "red fruit") by ethanol extract were investigated at various condition of light temperature sugar, organic acid me-tal ion and pH. The pigments were stable(over the 60%) on the light irradiation throughout 20 days sto-rage period at room temperature and in the pesenc of Al-foil red blue green and yellow cover were rage period at room temperature and in the pesence of Al-foil red blue green and yellow cover were very stable. The pigments also showed high thermal stbility(over the 67% at 115$^{\circ}C$ 10min) at pH2.5 respectively. The pigments with added organic acid greatly increased thickness of red color. The pig-ments with added metal ions at pH 2.5 such as Na+ K+, Mg2+ Ca2+ and Mn2+ were stable throughout 20 days storage period at $25^{\circ}C$. But Cu2+ addition showed the rapidly degradation of the pigments and Al3+ addition induced the color conversion from red to redish violet. The thickness of the red color of anthocyanin pigments increased increased as the pH decreased. These results indicated that crab apple antho-cyanin pigments might be potental source of natural food colorant. colorant.

  • PDF

최소 공정온도하에서 Mg-Ni의 열확산 접합에 관한 연구 (A Study on the Diffusion Bonding of Mg-Ni under Low Eutectic Temperature)

  • 진영준
    • 한국안전학회지
    • /
    • 제32권1호
    • /
    • pp.9-14
    • /
    • 2017
  • Diffusion bonding is a technique that has the ability to join materials with minimum change in joint micro-structure and deformation of the component. The quality of the joints produced was examined by metallurgical characterization and the joint micro-structure developed across the diffusion bonding was related to changes in mechanical properties as a function of the bonding time. An increase in bonding time also resulted in an increase in the micro-hardness of the joint interface from 55 VHN to 180 VHN, The increase in hardness was attributed to the formation of intermetallic compounds which increased in concentration as bonding time increased.

인장강도가 뛰어난 직물집전체를 이용한 탄소전극의 축전식 탈염공정에서의 제염효과 (The Salt Removal Efficiency Characteristics of Carbon Electrodes Using Fabric Current Collector with High Tensile Strength in a Capacitive Deionization Process)

  • 성두리;김대수
    • Korean Chemical Engineering Research
    • /
    • 제58권3호
    • /
    • pp.466-473
    • /
    • 2020
  • 직물집전체는 에너지 효율이 높은 담수화 방식인 축전식탈염(Capacitive deionization: CDI)시스템에서 유망한 전극 재료가 될 수 있다. 직물집전체의 매력적인 특징 중 하나는 인장강도가 강하다는 것인데, 기계적 강도가 약한 그라파이트 호일 전극의 대안이 될 수 있다. 또한 섬유적 특성으로 인하여 쉽게 형상을 만들 수 있고, 다공성 물질이라는 점과 섬유 간 공간은 수용성 매질의 흐름을 원활하게 해 준다. 본 연구에 사용된 섬유는 도전성 LM fiber와 carbon fiber를 사용한 방적사를 이용하여 직조 구조로 만들어졌으며, 인장강도는 319 MPa로 그라파이트 호일에 비해서 약 60 배 정도 더 강하다. 전극슬러리의 점도, 흡착전압, 공급액의 유량, 공급액의 농도를 변화시켜 가면서 염 제거효율을 측정하여 결과를 분석하였다. NaCl 200 mg/L, 20 ml/min, 흡착전압 1.5 V 조건에서, 단위 셀에서 43.9%, 100개의 셀을 적층한 모듈에서는 59.8%의 염 제거 효율을 각각 보였다. 단위 셀에서는 흡착전압이 1.3, 1.4, 1.5 V로 증가함에 따라 염 제거효율이 증가하다가 1.6과 1.7 V로 증가하면서 염 제거 효율은 감소하였다. 그러나 100 셀 적층 모듈에서는 1.5 V 이상의 전압에서도 염 제거효율이 완만한 증가세를 나타내었다. 공급액의 유량을 증가시켰을 때 염 제거율은 감소하였고, 또한 공급액의 농도를 증가시켰을 때에도 염 제거율은 감소하였다.