• Journal of Korean Society on Water Environment
• /
• v.37 no.4
• /
• pp.306-314
• /
• 2021

The application of organic fertilizer could be accompanied by potential hazards to soil and humans due to trace metals. Livestock manure compost·liquefied fertilizer is a well-established approach for the stabilization of nutrients and the reduction of pathogens and odors in manures, which can be evaluated as compost·liquefied. In this study, the livestock manure compost·liquefied fertilizers produced at 333 liquid manure public resource centers and liquid fertilizer distribution centers were collected from May to December 2019. The nutrient content (nitrogen, phosphorus, and potassium), physicochemical properties, and heavy metal content were investigated. The livestock manure compost·liquefied fertilizer was measured using a mechanical maturity measurement device. The organic matter, arsenic, cadmium, mercury, lead, chromium, copper, nickel, zinc, E. coli (O157:H7), Salmonella, etc. of the livestock manure compost·liquefied fertilizers were analyzed. The average heavy metal content in the livestock manure compost·liquefied fertilizer was as follows: Cr 2.9 mg/kg (0.2~8.7 mg/kg), Cu 20.4 mg/kg (1.6~74.1 mg/kg), Ni 1.3 mg/kg (0.4~4.2 mg/kg), and Zn 79.8 mg/kg (3.0~340.7 mg/kg). Although large-scale organic fertilizer plants and resources recycling centers produce good organic (liquid) fertilizers with proper components, it is necessary to standardize livestock manure compost·liquefied fertilizer in order to facilitate efforts to turn livestock manure into useful resources.

• Journal of Korean Society on Water Environment
• /
• v.27 no.2
• /
• pp.235-241
• /
• 2011

This study was performed to investigate the characteristics of nutrient removal of municipal wastewater in the submerged membrane bioreactor by addition of alum directly into aerobic tank. Membrane bioreactor consists of three reactors such as two intermittent anaerobic tanks and the aerobic tank with hollow fiber membrane. The removal efficiencies of $COD_{cr}$, BOD, SS, TN and TP on the membrane bioreactor were 94.0%, 99.1%, 99.9%, 66.9%, and 58.9%, respectively. In addition, The removal efficiencies of $COD_{cr}$, BOD, SS, TN and TP on the membrane bioreactor with alum addition were 93.4%, 99.0%, 99.9%, 63.2%, and 96.8%, respectively. There was little difference between them on the nutrient removal efficiencies except phophorus removal. The estimated sludge production, specific denitrification rate, specific nitrification rate and phosphorus removal content on the membrane bioreactor were 1.76 kgTSS/d, $0.055mgNO_3-N/mgVSS{\cdot}d$, $0.031mgNH_4-N/mgVSS{\cdot}d$, and 0.095 kgP/d, respectively. And The estimated sludge production, specific denitrification rate, specific nitrification rate and phosphorus removal content on the membrane bioreactor with alum addition were 2.90 kgTSS/d, $0.049mgNO_3-N/mgVSS{\cdot}d$, $0.030mgNH_4-N/mgVSS{\cdot}d$, and 0.160 kgP/d, respectively. The alum content added was 1.7 molAl/molP on an average. The increasing ratio of tran-membrane pressure on the membrane bioreactor was $0.0056kgf/cm^2{\cdot}compared$ to $0.0033kgf/cm^2{\cdot}d$ on the membrane bioreactor with alum addition. There was a slightly reduction effect on membrane fouling by alum addition.

• Corrosion Science and Technology
• /
• v.22 no.2
• /
• pp.123-130
• /
• 2023

This study aimed to evaluate corrosion resistance of steel coated with GI and Zn-Al-Mg alloy using cyclic corrosion test (CCT) with electrochemical polarization and impedance measurements. Results showed that the Zn-Al-Mg alloy coated steel had a much higher corrosion rate than GI coated steel in early stages of corrosion. With prolonged immersion, however, the corrosion rate of the Zn-Al-Mg alloy coated steel greatly decreased, mainly owing to a significant decrease in the cathodic reduction reaction and an increase in polarization resistance at the surface. This was closely associated with the formation of protective corrosion products including Zn₅(OH)₈Cl₂·H₂O and Zn₆Al₂(OH)₁₆CO₃. Moreover, when the steel substrate was locally exposed due to mechanical damage, the kinetics of anodic dissolution from the coating layer and the formation of protective corrosion products on the surface of the Zn-Al-Mg alloy coated steel became much faster compared to the case of GI coated steel. This could provide a longer-lasting corrosion inhibition function for Zn-Al-Mg alloy coated steel used in plant farms.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.475-481
• /
• 2013

Although the lightly burnt MgO at $850{\sim}1000^{\circ}C$ has expansibility, it does not lead to unsound concrete. The expansion of MgO could compensate for shrinkage of concrete for a long-term, because the hydration of MgO occurs at a slow pace. Recently, the study and application of mineral admixture such as fly ash and blast furnace slag have increased for the hydration heat reduction, durability improvement, and reducing $CO_2$ emission in the construction industry. Thus, it is necessary to research on the concrete that contains both a mineral admixture and MgO as an expansion agent. This study investigates fundamental properties of fly ash concrete with lightly burnt MgO through various experiments. The adiabatic temperature test results showed that the fly ash concrete with MgO of the 5% replacement ratio had the slower pace of the temperature rise and the lower final temperature than the fly ash concrete. The influences of MgO on long-term compressive strength varied depending on water-binder ratio, and the long-term length change test results indicated the expansion effects of the FA concrete containing MgO.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.4
• /
• pp.424-429
• /
• 2010

To solve the problems with excessive accumulation of soil inorganic N and resulting saline soils from overuse of nitrogen fertilizer, the effect of sucrose application on decrease of soil inorganic N content and electrical conductivity (EC) was studied. Sucrose treatment greatly reduced ${NH_4}^+$-N content in soil. The amount of reduction was greater as the amount of sucrose treatment was increased. When ${NH_4}^+$-N content was reached the lowest point (about 10 mg $kg^{-1}$or lower), the C/N ratio, which determines the amount of sucrose treatment, was around 10 regardless of initial ${NH_4}^+$-N content. For the rate of ${NH_4}^+$-N reduction 15~36 hours was required to reduce the initial ${NH_4}^+$-N content to half, and 36~69 hours to lower ${NH_4}^+$-N content to the lowest point (about 10 mg $kg^{-1}$or lower). In addition, sucrose treatment greatly lowered ${NO_3}^-$-N content. In case of C/N ratio above 10, initial ${NO_3}^-$-N content of 348 mg $kg^{-1}$ was reduced to the lowest of 14~21 mg $kg^{-1}$. As for the rate of ${NO_3}^-$-N reduction by sucrose treatment, it took 36~60 hours for ${NO_3}^-$-N content to reach the lowest point for C/N ratio of 10 or higher, and it took 3 weeks, comparably longer time, for C/N ratio of 5. Lowering soil EC from sucrose treatment showed the same trend as ${NO_3}^-$-N content. As an important energy and carbon source for humankind, sugar should not be wasted and must be carefully applied to soil. In principle, the best way of preventing salt accumulation in soil is to optimize the fertilizer input. However, when over-fertilization should be dealt with, the sucrose treatment would be a possible and effective counter-measure to reduce overdosed nitrogen sources in soil.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.13 no.1
• /
• pp.61-70
• /
• 2005

In order to reduce salt(as NaCl) contents in food waste and to improve the quality of discharged wastewater produced during the recycling process of food waste for the purpose of compost and feed stuff, a salt reduction process by added water into food waste was developed. The pilot plant with a rotary type salt reduction equipment to manage continuously 0.5 ton food waste per hour was constructed and the efficiency was tested. The amount of added water was calculated by the water content and the efficiency of dewatering process of food waste. Approximately 0.8 liter water per a kilogram of food waste was injected into the reactor in which food waste was pouring simultaneously, then diluted/mixed in a rotary reactor. About 1.1 liter of leachate including added water was generated, but the leachate contained a very high content of organic particles, so most particles were recovered by two step solid-liquid separation process. The first step was a gravitational filtering process using screens with a pore diameter of 1mm, and the second separation process was centrifugal process. Organic quality of food waste which had been desalted was maintained by inputting the entirely recovered organic particles. The efficiency of salt reduction of food waste was estimated by measuring a chloride anion by titration and salinity by a probe. The results by the two different measuring methods were always over 50%, and the quality of final wastewater was improved up to $200mg/{\ell}$ as TS(total solid) by an additional settling process after the two step solid-liquid separation process.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.1
• /
• pp.88-95
• /
• 2011

An experiment was conducted to determine the standardized ileal digestibility (SID) of amino acids (AA) in four sources of full-fat soybeans (FFSB) and in one source of soybean meal (SBM). The FFSB had different concentrations of trypsin inhibitor units (TIU) and included two sources of conventional FFSB, and two sources of a soybean variety that was selected for a reduced concentration of the Kunitz trypsin inhibitor. The conventional FFSB was either low temperature-processed (LT-FFSB-CV; 37.7% CP, 35.4 TIU/mg) or high temperature-processed (HT-FFSB-CV; 40.5% CP, 4.4 TIU/mg). The low-Kunitz FFSB was also either low temperature-processed (LT-FFSB-LK; 36.2% CP, 23.5 TIU/mg) or high temperature-processed HT-FFSB-LK; (38.2% CP, 4.0 TIU/mg). The SBM contained 47.5% CP and 3.20 TIU/mg. Twelve weanling barrows (initial BW: $11.1{\pm}1.3\;kg$) were fitted with a T-cannula in the distal ileum. Pigs were allotted to a replicated $6{\times}6$ Latin square design with six diets and six periods per square. Five diets were prepared using each of the soybean sources as the only source of AA in the diet. An N-free diet was also included in the experiment to measure basal endogenous losses of AA. The two low temperature-processed FFSB had lower (p<0.05) AID and SID values for all indispensable AA than the two high temperature-processed FFSB and SBM. The SID values for all indispensible AA except Trp were greater (p<0.05) in LT-FFSB-LK than in LT-FFSB-CV, but the SID of AA in HT-FFSB-CV and HT-FFSB-LK were not different. The SID of AA in SBM were not different from the SID in HT-FFSB-CV and in HT-FFSB-LK. Results of this experiment show that a reduction of the TIU from 35.4 to 23.5 TIU/mg will improve the SID of AA, but this reduction is not sufficient to completely ameliorate the negative impact of trypsin inhibitors. Results also show that the SID of AA in high temperature-processed FFSB is similar to that in de-hulled SBM.

• Applied Biological Chemistry
• /
• v.20 no.2
• /
• pp.228-235
• /
• 1977

The yeast strain was isolated from food industry waste water and its identification and biological characteristics were investigated. The optimum condition for cultivations and its activities for the reduction of B.O.D. on the food industry waste water were also confirmed. The results are as follows; 1) The isolated was identified as Candida curvata. 2) Candida curvata grew well in all of the experimented media, so and it can be regarded as a useful strain in the treatment of food industry waste water. 3) There was only a slight difference in the induction period between sterilized cultivation and unsterilized cultivation. But in the ice cream waste water, the period was considerably longer in unsterilized cultivation. 4) Specific rate of growth of Candida curvata in sugar waste water was 0.50/hr, ice cream waste water 0.50/hr, and beer waste water 1.0/hr. 5) Increasing of innoculum reduced the induction period in unsterilized cultivation. 6) The amount of dried yeast from sugar waste water were $175mg/{\ell}$, ice cream waste water $628mg/{\ell}$, and beer waste water $857mg/{\ell}$. Crude protein content in the dried yeast from sugar waste water were 52%, ice cream waste water 54%, and beer waste water 54%. 7) The rate of BOD reduction in sugar waste water were 49%, ice cream waste water 80%, and beer waste water 64%.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.6
• /
• pp.238-242
• /
• 2016

The effect of the alkali, alkali earth metal elements on selective catalytic reduction(SCR) catalyst deactivation behavior were investigated in terms of microstructure, surface area, pore volume and De-NOx test. Poisoned SCR catalyst were manufactured by injection of $K_2CO_3$, $Na_2CO_3$, $Ca(CH_3COO)_2{\cdot}H_2O$, $C_4H_6MgO_4{\cdot}4H_2O$, $H_3PO_4$ solutions in the new SCR catalyst at $350^{\circ}C$ for 6 hours. New and poisoned catalysts surface were similar. But specific surface area, pore volume decrease from Na, Mg, K, Ca, P compared to new SCR catalyst. Especially, Na poisoned catalyst surface area and pore size extremely decreased by $10.20m^2/g$, $0.061cm^2/g$. De-NOx test results of new and poisoned catalysts at $150{\sim}450^{\circ}C$ indicated that alkali metal (K, Na) poisoned SCR catalysts have the lowest De-NOx efficiency, alkali earth metal poisoned SCR catalysts (Ca, Mg) De-NOx efficiency are higher than alkali metal poisoned SCR catalysts. P poisoned SCR catalyst De-NOx efficiency is similar new SCR catalyst. It were considered that physical deactivation of SCR catalyst was affected by SCR catalyst surface area and pore volume change.

• Journal of Korean Society of Forest Science
• /
• v.107 no.1
• /
• pp.50-58
• /
• 2018

The purpose of this study was to investigate the effects of Aruncus dioicus on annual soil erosion reduction effect. Based on the measured soil erosion data, the cover factor of RUSLE was calculated. Comparing calculated the cover factor and Chewings fescue cover factor for soil erosion reduction, It found that cover crop Aruncus dioicus of reducing soil erosion was effective. The amount of soil erosion according to the type of Aruncus dioicus covering was 2.22 Mg/ha, Chewings fescue was 1.85 Mg/ha, 10.60 Mg/ha was produced in the Bare ground. Cover factor of Aruncus dioicus was $0.09{\pm}0.03$ according to the type of covering, Chewings fescue was $0.08{\pm}0.03$, Bare ground was $0.35{\pm}0.10$. Weeds control Bare ground was $0.83{\pm}0.14$. The results of the variance analysis of the cover factor for each covering were different according to the cover type. As a result of the classification of the same group through post - analysis, it was found that the Aruncus dioicus and Chewings fescue were similar to each other. Therefore, the Aruncus dioicus was effective to reduce the soil erosion to the extent that it was comparable to the Chewings fescue.