• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.113-116
• /
• 2006

In order to fully utilize the inherent precision that GPS observables could offer, accurate estimation of dynamic and measurement parameters is vital. Among these parameters some are indispensable in virtually every form of GPS processing, while some are limitedly relevant to a particular application. In the context of time transfer by GPS, the transmission-related errors such as ionospheric and tropospheric delays, and the integer ambiguity of the carrier phase observables belong to the former, the atomic clock parameters and data batch-related parameters to the latter. Obviously the atomic clock parameters are of prime importance in GPS time transfer. In this study some of important parameters in conducting time transfer experiments by use of GPS were characterized and their effects on time transfer performance were investigated in detail

• Journal of the Korean Society of Safety
• /
• v.23 no.5
• /
• pp.30-34
• /
• 2008

To evaluate the mechanical properties of in-service materials, tensile properties measurement using small-scaled specimen has been carried out. Tensile testing specimens with various dimensions, including standard and sub-size specimen specified in ASTM and ISO and small-scaled specimen, were prepared. Tensile strain in small-scaled specimen was measured using micro-ESPI system set up in this study. This system was used in the specimen with the parallel length of 2 mm and in subsequently measuring the strain under tensile loading. From each type of tensile specimen, stress-strain curves were determined. The dimension effect of the tensile properties was investigated comparing the tensile results obtained from standard specimens and small-scaled specimens. It was shown that the tensile strength for the small-scaled specimen is lower by 15% than those for the standard specimen.

• Current Optics and Photonics
• /
• v.3 no.1
• /
• pp.33-39
• /
• 2019

We report development of a frequency-stabilized mid-infrared continuous-wave (cw) optical parametric oscillator (OPO) based on a fan-out grating MgO:PPLN crystal pumped at 1064 nm. The OPO resonator was designed as a pump-enhanced standing-wave cavity that resonates to the pump and signal beams. To realize stable operation of the OPO, we applied a modified Pound-Drever-Hall technique, which is a well-known method for powerful laser frequency stabilization. Tuning a poling period of the fan-out grating of the crystal allows wavelength-tunable OPO outputs from 1510 nm to 1852 nm and from 2500 nm to 3600 nm for signal and idler beams, respectively. At the idler wavelengths of 2500 nm, 3000 nm and 3500 nm, we achieved more than 50 mW of output powers at a pumping power of 1.1 W. The long-term stability of the OPO was confirmed by recording the power and wavelength variations of the idler for an hour.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2000.09a
• /
• pp.522-529
• /
• 2000

We present a new procedure to evaluate the residual life of 1Cr-1Mo-0.25V steel by reversible magnetic permeability. The method is based on the existence of the first harmonics in the differential magnetization around the coercive force. The apparatus is based on the detection of the voltage induced in a coil using a lock-in amplifier tuned to a frequency of the exciting one. Results obtained for the first harmonics and Vickers hardness on the aged samples show that the peak interval of reversible permeability and Vickers hardness decrease as ageing time increases. The correlation between Vickers hardness and the peak interval of the reversible permeability could well be used to evaluate the residual life of 1Cr-1Mo-0.25V steel, nondestructively.

• 한국초전도학회:학술대회논문집
• /
• v.16
• /
• pp.59-59
• /
• 2006

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.08a
• /
• pp.78-78
• /
• 2009

• Journal of Radiation Protection and Research
• /
• v.26 no.3
• /
• pp.271-273
• /
• 2001

In precise measurement of air kerma with cavity ionization chambers, the effect of wall attenuation and scatter are corrected by Kwall and that of nonuniformity by Knu. Using the EGS4 code, we calculated these two correction factors. Correction factors calculated for two different-sized cylindrical ionization chamber differ by up to 0.7% from those obtained by measurements.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.11
• /
• pp.7-11
• /
• 2009

• Proceedings of the Korean Vacuum Society Conference
• /
• 2004.08a
• /
• pp.48-48
• /
• 2004

• Proceedings of the Korean Magnestics Society Conference
• /
• 2005.06a
• /
• pp.200-201
• /
• 2005