• Advances in materials Research
• /
• 제13권3호
• /
• pp.243-251
• /
• 2024

The asymmetric polylactic acid (PLA) membrane was prepared via phase inversion method using non-solvent induced separation (NIPS) technique. This study aims to synthesized as well as to characterize the PLA membrane and evaluating the membrane performance on water flux and permeability. In addition, this research also studied the removal performance of methylene blue dye. The polymer solution has been prepared using 12 wt.% of PLA and dissolved in 88 wt.% of Dimethylacetamide (DMAc) as a solvent. Then, the cast film was immersed in different ratio of coagulant bath medium (distilled water: methanol: ethanol) ranging from 100:0:0, 75:25:0, 75:0:25 and 75:12.5:12.5, respectively). Several characterizations were performed which include, membrane contact angle and membrane porosity. Performance PLA membranes were determined in terms of water flux and permeability at 1 bar transmembrane pressure using dead-end permeation cell. Finally, methylene blue (MB) removal efficiency was tested at the same transmembrane pressure. The findings revealed that the increase of alcohol concentration in coagulant bath resulted in higher porosity and lower contact angle. In short, MB dye rejection efficiency is also closely related to the amount of alcohol ratio used in coagulant baths. Increases in concentration of methanol and ethanol in coagulant bath medium increases the membrane porosity thus increased in efficiency of methylene blue rejection.

• 한국산학기술학회논문지
• /
• 제10권11호
• /
• pp.3031-3038
• /
• 2009

코발트 적재된 활성탄소섬유(ACFs)는 이산화티탄($TiO_2$) 광촉매 반응을 촉진시키는 것을 발전되었다. Co-ACFs/$TiO_2$ 광촉매는 SEM, XRD, EDX 및 UV-vis 분광기를 사용하여 분석하였다. Co-ACFs/$TiO_2$ 광촉매에 대한 메틸렌불루(MB)의 분해 효과는 300분 반응해서 거의 100%를 도달하였다. 용액에 있는 MB 분자들은 ACFs의 흡착에 의해 $TiO_2$ 입자의 주위에 응축한다고 가정되었다. 그래서 이 광촉매 복합체는 MB 광분해에 대한 활성탄의 흡착성과 $TiO_2$의 광촉매 특성의 결합한 성능을 가지고 있다. 코발트가 전자 천이 효과를 가지고 있기 때문에 MB 용액의 광분해가 증가되는 것으로 판단된다.

• 한국재료학회지
• /
• 제27권11호
• /
• pp.577-582
• /
• 2017

Self-cleaning and photocatalytic $TiO_2$ thin films were prepared by a facile sol-gel method followed by spin coating using peroxo titanic acid as a precursor. The as-prepared thin films were heated at low temperature($110^{\circ}C$) and high temperature ($400^{\circ}C$). Thin films were characterized by X-ray diffraction(XRD), Field-emission scanning electron microscopy(FESEM), UV-Visible spectroscopy and water contact angle measurement. XRD analysis confirms the low crystallinity of thin films prepared at low temperature, while crystalline anatase phase was found the for high temperature thin film. The photocatalytic activity of thin films was studied by the photocatalytic degradation of methylene blue dye solution. Self-cleaning and photocatalytic performance of both low and high temperature thin films were compared.

• KSBB Journal
• /
• 제8권4호
• /
• pp.364-369
• /
• 1993

The biodegradability of some anionic surfactants were investigated using biological oxygen consumption measurement at different temperatures. As test surfactants, soap, alkyl sulfate (AS), alpha olefin sulfonate (AOS), alkyl polyoxyethylene sulfate (AES), linear alkylbezene sulfonate(LAS), microbial surfactants such as sophorose lipid (sopholipid) and spiculisporic acid (S-acid), were used. The test solution were incubated at $5^{\circ}C$, $18^{\circ}C$ and $32^{\circ}C$, respectively. The comparative rates of biodegradation were in accordance with the results obtained from the surface tension measurement and methylene blue method. The results of comparative blodegradabilities of the surfactants were as follows; soap, AS>AES>AOS>LAS at $18^{\circ}C$ and $32^{\circ}C$. However, at$ 5^{\circ}C$, the biodegradation rate of soap was better than other surfactants. Considering the actual environment of the river, it was concluded that the biological oxygen consumption rate method at lower temperature was more practical than the current method such as methylene blue assay with adapted shaking flask culture at $25^{\circ}C$

• Restorative Dentistry and Endodontics
• /
• 제4권1호
• /
• pp.29-34
• /
• 1978

The purpose of this study was to measure penetration of dye stuff(5% Methylene blue, Hematoxylin, Crystal violet and Safranin-O) on silicate cement, Adaptic, Hi-pol and unfilled resin. Each filling material was mixed on the mixing pad and the mixed material was inserted with condensation force of 500gr, 1000gr and 2000gr and without condensation force into preformed glass tube (10mm in diameter and 10mm in height). The specimen was stored in the air for 24 hours, then specimen was immersed in various dye solution (5% methylene blue, hematoxin, crystal violet and safranin-O) for different period of time (l hour and 24 hours). These dye-treated specimen was cut horizontally at the middle portion and the dye penetration in cut surface was measured. Following results were obtained. 1. Pentration of various dye was excessive in silicate cement with and without Condensation force. 2. There has been no evidence of dye penetration in unfilled resin. 3. Dye penetration occurced with in 1 hour period and the extending time didn't affect the dye penetration.

• 한국세라믹학회지
• /
• 제47권3호
• /
• pp.210-215
• /
• 2010

In this study, an expanded graphite-titanium oxide composite is developed from expanded graphite (EG) and titanium n-butoxide (TNB). EG is synthesized by chemical intercalation of natural graphite (NG) and rapid expansion at high temperature. TNB is used as the titanium source. The performances of the prepared EG-$TiO_2$ composite are characterized by BET surface area measurements, scan electron microscope (SEM), X-ray diffraction patterns (XRD) and energy dispersive X-ray analysis (EDX). The catalytic activities of the EG-$TiO_2$ composite are investigated by analysis of the degradation of methylene blue (MB) in aqueous solution under irradiation of UV light. Compared with the pristine $TiO_2$ and activity carbon-$TiO_2$ (AC-$TiO_2$) composite, the EG-$TiO_2$ composite shows very high efficiency against MB solution, and the EG could improve the photocatalytic effect of $TiO_2$ in the MB degradation reaction under the irradiation of UV light.

• 공업화학
• /
• 제32권3호
• /
• pp.348-356
• /
• 2021

The lignocellulose-based dried watermelon rind (WR) was modified with sulfuric acid, namely SWR for enhancement of methylene blue (MB) adsorption from the aqueous solution. According to FT-IR analysis, after the modification of WR with sulfuric acid, the functional groups of R-SO₃H, COOH and -OH groups was formated or enhanced on the surface of the WR. Moreover, the point of zero charge (pHpzc) was changed from 6.3 to 4.1 after modification, which widened the range for adsorbing of cationic dye MB. The adsorption process of MB onto the SWR was suitable for pseudo-2nd-order and Langmuir model and the maximum adsorption capacity of Langmuir was found to be 334.45 mg/g at pH 7. In adition, the adsorption process occurs through the electrostatic interaction, hydrogen bridge formation, electron donor-acceptor relationship, and 𝜋-𝜋 electron dispersing force between functional groups on the carbon surface with MB molecules. Depending on functional groups available on the SWR surface, the MB adsorption mechanism can occur in combination with various interactions.

• 방사성폐기물학회지
• /
• 제21권1호
• /
• pp.43-53
• /
• 2023

Sulfide concentrations critically affect worker safety and the integrities of underground facilities, such as deep geological repositories for spent nuclear fuel. Sulfide is highly sensitive to oxygen, which can oxidize sulfide to sulfate. This can hinder precise measurement of the sulfide concentration. Hence, a literature review was conducted, which revealed that two methods are commonly used: the methylene blue and sulfide ion-selective electrode (ISE) methods. Inductively coupled plasma optical emission spectroscopy (ICP-OES) was used for comparison with the two methods. The sulfide ISE method was found to be superior as it yielded results with a higher degree of accuracy and involved fewer procedures for quantification of the sulfide concentration in solution. ICP-OES results can be distorted significantly when sulfide is present in solution owing to the formation of H₂S gas in the ICP-OES nebulizer. Therefore, the ICP-OES must be used with caution when quantifying underground water to prevent any distortion in the measured results. The results also suggest important measures to avoid problems when using ICP-OES for site selection. Furthermore, the sulfide ISE method is useful in determining sulfide concentrations in the field to predict the lifetime of disposal canisters of spent nuclear fuel in deep geological repositories and other industries.

• 한국도로학회논문집
• /
• 제19권1호
• /
• pp.53-62
• /
• 2017

PURPOSES : This research was a fundamental study on the application of an integral $TiO_2$ solution to asphalt concrete pavement. The integral $TiO_2$ solution was produced in pilot production equipment; application of the integral $TiO_2$ solution to asphalt pavement was conducted to examine the pollution-reducing capability of photocatalytic compounds such as $TiO_2$. The photocatalytic $TiO_2$ reacted with air pollutants, converting them into small amounts of relatively benign molecules. METHODS : In this study, laboratory experiments were conducted using five various testing methods. Tensile strength ratio (TSR) and British pendulum test (BPT) were conducted in order to evaluate the properties of asphalt pavement subsequent to the integral $TiO_2$ solution coating. In addition, methylene blue testing, a measurement of nitrate on the coated pavement, and nitrogen oxide (NOx) reduction testing were conducted in order to evaluate photocatalytic reaction. Lastly, a UV-A lamp was used as a light source for photocatalytic reactions. RESULTS : Test results indicated no change in the properties of asphalt pavement following the integral $TiO_2$ solution coating. In order to evaluate the performance of asphalt pavement as a function of $TiO_2$, the moisture susceptibility and skid resistance were investigated. The moisture susceptibility and skid resistance satisfied there quirements related to pavement quality and safety specification. Furthermore, the effects of reduction of air pollution were significantly improved as determined via the methylene blue test and NOx reduction test. The $TiO_2$-paved asphalt specimen exhibited approximately 43% reduction of NOx. CONCLUSIONS : This study has suggested that applying $TiO_2$ rarely impacts asphalt pavement performance measures such as moisture susceptibility and skid resistance, and that its application may be a better means of reducing air pollution. Further studies, such as proper $TiO_2$ dosage rates and compatibility with various pavement types, are required to broaden and generalize its application.

• 대한화학회지
• /
• 제26권5호
• /
• pp.326-332
• /
• 1982

플루오르화수소산 존재하에서 methylene blue의 양이온과 $BF_4^-$, 음이온이 이루는 착물을 1,2-dichloroethane과 nitrobenzene으로 용매추출하여 분광광도법으로 분석하였다. 적외선과 가시선 스펙트럼을 조사하여 이 착물은 1:1 조성비를 가지는 ion-pair로 존재하는 것으로 보이며 1,2-dichlorethane 중에서는 해리하지 않는 것을 알아냈다. 1,2-Dichlorethane에 대해서는 HF의 농도가 1.43${\times}10^{-2}$~ 2.86${\times}10^{-1}$M 범위에서 추출상수가 25$^{\circ}$C에서 1.1${\times}10^4M{-1}$로 일정한 값을 나타내었으며 nitrobenzene에 대하여는 대체로 10배 가량 큰 값을 가지지만 HF농도가 증가함에 약간씩 증가하였다.