• Journal of the Korean Applied Science and Technology
• /
• v.23 no.2
• /
• pp.153-159
• /
• 2006

The photocatalytic degradation of methylene blue(MB) was investigated using $TiO_2$ as photocatalyst and UV radiation. $TiO_2$ supported with activated carbon(AC) was prepared by SOL-GEL method and depended on several parameters such as the mass ratio of $TiO_2/AC$, pH and experimental time. The presence of the anatase and rutile crystal phase was determined by XRD analyses of the prepared $TiO_2$. The degradation of MB with $TiO_2/AC$ was about 20% higher than that of AC alone. A variation of photodegradation was negligible under UV radiation conditions ( ${\geq}$ 40W). It was experimentally showed that the photodegradation rate was increased with increasing the amount of photocatalyst. The optimal catalyst was prepared by impregmation of $5wt%-TiO_2$ with AC and was calcined at $300^{\circ}C$, and showed about 99% removal efficiency for 3hrs.

• Carbon letters
• /
• v.14 no.1
• /
• pp.27-33
• /
• 2013

An increase in population initiating rapid industrialization was found to consequently increase the effluents and domestic wastewater into the aquatic ecosystem. In this research the potentialities of Sambucus nigra L. (SNL) plant in the remediation of water, contaminated with methylene blue (MB), a basic dye were investigated. SNL was chemically impregnated with $KHCO_3$. Operating variables studied were pH, amount of adsorbent and contact time. In general, pH did not have any significant effect on colour removal and the highest adsorption capacity was obtained in 0.035 g MB/g-activated carbon. The Langmuir, Freundlich, Temkin and Dubinin-Radushkevich adsorption models were applied to describe the equilibrium isotherms. The adsorption isotherm data were fitted to the Temkin isotherm. The mass transfer property of the sorption process was studied using Lagergren pseudo-first-order and chemisorption pseudo-second-order kinetic models. The sorption process obeyed the pseudo-second-order kinetic model. The surface area, pores volume and diameter were assessed by the Brunauer-Emmett-Teller and Barrett-Joyner-Halenda methods. The results were compared to those from activated carbon (Merck) and an actual sample. The results indicate that SNL can be employed as a natural and eco-friendly adsorbent material for the removal of dye MB from aqueous solutions.

• Journal of the Korean Applied Science and Technology
• /
• v.13 no.3
• /
• pp.127-136
• /
• 1996

Thermograms of methylene blue(MB) in $L-{\alpha}-lecithin$ vesicle and incorporated purple membrane vesicle(InPM) systems have been studied by photochemical reaction differential scanning calorimetry at $25{\sim}55^{\circ}C$. Phase transition temperatures of lecithin vesicle, purple membrane(PM), and InPM were found to be independent of illumination of light(436nm) at $39{\sim}40^{\circ}C$, but endothermic phase transition was found in InPM vesicle. In MB-InPM system, endothermic phase transition was found on unillumination of light at $40{\sim}42^{\circ}C$, but exothermic phase transition was found on steady illumination of light at $48{\sim}52^{\circ}C$. It was estimated that the light energy absorbed from MB on vesicular surface was transferred to PM, and the transferred energy was redistributed to hydrophobic site of membrane. Therefore, the exothermic phase transition was measured at high temperature because of the increased hydrophobicity of acyl chain.

• The Journal of Korean Physical Therapy
• /
• v.23 no.6
• /
• pp.77-84
• /
• 2011

Purpose: The objectives of this study were to determine the enhancing effect of iontophoresis method as it transdermally deliver methylene blue (MB) using visual examination, in terms of penetration depth and tissue distribution in the skin, and to determine the effect of application duration on the efficacy of iontophoresis. Methods: Twenty-four male Sprague-Dawley rats were randomly divided into 5-, 10-, 20-, and 40-minute groups. These rats were exposed to either topical or anodic iontophoresis of 1% MB using a direct current of $0.5mA/cm^2$ for 5, 10, 20, and 40 minutes. Using cryosections of rat tissues, the penetration depth of MB was measured using light microscopy. Results: Significant differences in the penetration depth (F=54.20, p<0.001) were detected among the four groups. Post hoc comparisons of the penetration depth of MB data pooled across groups showed no significant difference between all topical application groups and 5-minute iontophoresis group, but did reveal a significant difference in the penetration depth between all topical application groups and 5-minute iontophoresis group versus 10-minute group, between the 10-minute and 20-minute group, and between the 20-minute and 40-minute iontophoresis group (p<0.05). Conclusion: The results demonstrate that iontophoresis enhances transdermal delivery of MB across stratum corneum of skin barrier by visual examination. Furthermore, the penetration depth of iontophoretic transdermal delivery of MB was dependent on the application duration. The duration of iontophoresis is one of the important factor in the efficacy of iontophoresis application.

• Journal of Korean Society on Water Environment
• /
• v.26 no.4
• /
• pp.707-712
• /
• 2010

Nitrogen-doped $TiO_2$ particles have been successfully prepared using titanium tetraisopropoxide as the Ti source and urea as the nitrogen source. As-prepared nitrogen-doped $TiO_2$ was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer-Emmett-Teller method (BET) and ultraviolet-visible light (UV-vis) absorption spectra techniques. Photocatalytic degradation of Methylene Blue (MB) has been carried out in both solar light (UV-vis) and the visible region (${\lambda}=420nm$). Nitrogen-doped $TiO_2$ exhibits higher activity than the commercial $TiO_2$ photocalyst, particularly under visible-light irradiation because bandgap of nitrogen-doped $TiO_2$ becomes remarkably decreased.

• Journal of Industrial Technology
• /
• v.37 no.1
• /
• pp.21-26
• /
• 2017

This work experimentally determined the effect of combining of microwave irradiation and the Fenton process on decolorization of methylene blue ($C_{16}H_{18}N_3SCl$, MB). As [$H_2O_2$] increased from 2.65 to 4.41 mM, the decolorization of MB increased from 22.7 to 99.1%. As [$Fe^{2+}$] increased from 0.07 to 0.18 mM, the decolorization of MB increased from 24.0 to 98.5%. MB removal efficiencies were ${\geq}95%$ at $[H_2O_2]{\geq}3.5mM$ and $3.5{\leq}[H_2O_2]/[Fe^{2+}]{\leq}17.3$, but $[H_2O_2]/[Fe^{2+}]{\geq}20$ caused a decrease in MB removal. A two-stage kinetic model matched the experimental data well.

• Applied Chemistry for Engineering
• /
• v.32 no.3
• /
• pp.348-356
• /
• 2021

The lignocellulose-based dried watermelon rind (WR) was modified with sulfuric acid, namely SWR for enhancement of methylene blue (MB) adsorption from the aqueous solution. According to FT-IR analysis, after the modification of WR with sulfuric acid, the functional groups of R-SO₃H, COOH and -OH groups was formated or enhanced on the surface of the WR. Moreover, the point of zero charge (pHpzc) was changed from 6.3 to 4.1 after modification, which widened the range for adsorbing of cationic dye MB. The adsorption process of MB onto the SWR was suitable for pseudo-2nd-order and Langmuir model and the maximum adsorption capacity of Langmuir was found to be 334.45 mg/g at pH 7. In adition, the adsorption process occurs through the electrostatic interaction, hydrogen bridge formation, electron donor-acceptor relationship, and 𝜋-𝜋 electron dispersing force between functional groups on the carbon surface with MB molecules. Depending on functional groups available on the SWR surface, the MB adsorption mechanism can occur in combination with various interactions.

• Korean Journal of Food Science and Technology
• /
• v.54 no.1
• /
• pp.1-7
• /
• 2022

Riboflavin (Rb), in the presence of methionine (Met) under light, generates superoxide radicals that can reduce nitro blue tetrazolium (NBT) to its corresponding formazan. The Rb-Met/NBT system has been used to measure the superoxide dismutase (SOD)-like activities of various antioxidants. However, the reaction mechanisms have not been clearly defined, and the assay conditions are not consistent. In this study, the effects of different photosensitizers and amino acids on NBT reduction in different solvents were investigated. NBT reduction in the Rb-Met/NBT system was more pronounced in phosphate-buffered saline, compared to distilled water or Tris (pH 7.5); histidine (His) instead of Met also led to considerable Rb-induced NBT reduction. Among the photosensitizers, methylene blue with His caused potent NBT reduction in Tris. Rb-induced NBT reduction combined with Met or His was quantitatively inhibited by SOD or gallic acid, but did not affect MB-induced reduction sensitively.

• Applied Chemistry for Engineering
• /
• v.29 no.1
• /
• pp.117-121
• /
• 2018

A stainless steel mesh was applied to the cathode of an electro-Fenton system. Methylene blue (MB) solution was chosen as the model waste water with non-biodegradable pollutants. For the model waste water, the degradation efficiency was compared among various SUS mesh cathodes with different surface treatments and magnetite coatings on them. With increasing amount of the magnetite coating on SUS mesh, the degradation efficiency also increased. The improved electro-catalytic characteristic was explained by the increased amount of in situ generated hydrogen peroxide near the cathode surface. Cyclic voltammetry data also showed improved electro-catalytic performance for SUS mesh with more magnetite coatings on them.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.2
• /
• pp.38-43
• /
• 2014

In this study, we evaluated the methylene blue (MB) adsorption potential of non-treated and UV-C pretreated bacterial biomass from aqueous solution. The UV-C pretreatment denature the biomass and has increased overall functional groups when compared to non-treated biomass. The biosorbent was exposed to various pH, biomass dose, and contact time. The results showed that the dried and UV-C pretreated biomass effectively removed MB within 30 min. Dried and UV-C pretreated biomass of Bacillus pseudomycoides JH 2-2 showed a adsorption of 858.2 and 1072.4 mg/g at optimum conditions (pH: 9.0, contact time: 30 min, biomass dose: 1 g/L). Similarly, dried and UV-C pretreated biomass of Citrobacter freundii JH 11-2 showed an adsorption 868.3 and 954 mg/g at optimum conditions (pH: 9.0, contact time: 10 min, biomass dose: 1.5 g/L). The changes in the functional groups of UV-C pretreated biomass could be responsible for enhanced adsorption of MB. The results obtained have shown that non-treated and UV-C pretreated biomass has a high adsorption capacity for MB dye and can be used as a low-cost biosorbent in wastewater treatments.