• 제목/요약/키워드: Method overloading

검색결과 60건 처리시간 0.034초

MFM-based alarm root-cause analysis and ranking for nuclear power plants

  • Mengchu Song;Christopher Reinartz;Xinxin Zhang;Harald P.-J. Thunem;Robert McDonald
    • Nuclear Engineering and Technology
    • /
    • 제55권12호
    • /
    • pp.4408-4425
    • /
    • 2023
  • Alarm flood due to abnormality propagation is the most difficult alarm overloading problem in nuclear power plants (NPPs). Root-cause analysis is suggested to help operators in understand emergency events and plant status. Multilevel Flow Modeling (MFM) has been extensively applied in alarm management by virtue of the capability of explaining causal dependencies among alarms. However, there has never been a technique that can identify the actual root cause for complex alarm situations. This paper presents an automated root-cause analysis system based on MFM. The causal reasoning algorithm is first applied to identify several possible root causes that can lead to massive alarms. A novel root-cause ranking algorithm can subsequently be used to isolate the most likely faults from the other root-cause candidates. The proposed method is validated on a pressurized water reactor (PWR) simulator at HAMMLAB. The results show that the actual root cause is accurately identified for every tested operating scenario. The automation of root-cause identification and ranking affords the opportunity of real-time alarm analysis. It is believed that the study can further improve the situation awareness of operators in the alarm flooding situation.

2회선 가공송전선의 단시간정격에 관한 평가방법 (An Evaluation Method for Short-Term Ratings of Double-Circuit Overhead Transmission Lines)

  • 김성덕;손홍관;장태인
    • 조명전기설비학회논문지
    • /
    • 제21권7호
    • /
    • pp.20-28
    • /
    • 2007
  • 본 논문에서는 2회선 가공송전선에 대하여 2회선 중 1회선에 고장이 발생한 경우에 안전하게 운전할 수 있는 단시간정격을 결정하기 위한 해석적 방법을 기술한다. 도체의 온도특성을 나타내는 열평형방정식을 선형화 함으로써 이 선형방정식으로 1회선 선로에 과부하가 발생하는 동안 과전류와 그 온도 특성을 쉽게 표현할 수 있다. 일반적으로 단시간 선로정격은 도체의 수명과 이도를 동시에 고려하여 결정해야 한다는 것은 잘 알려진 사실이다. 그렇지만 대부분의 전력회사는 단시간정격에 대한 각자의 다른 지침을 갖고 있다. 이 논문에서는 제안된 방법을 사용하면 과거 3시기에 건설된 한국전력공사의 가공송전선에 규정된 단시간정격을 재평가할 수 있고, 그 결과 단시간정격을 효율적으로 증대시킬 수 있음을 확인하였다. 또한 이 방법은 2회선 선로 중 1회선에 고장이 발생할 경우에 기존 선로에 어떤 조치도 하지 않아도 단시간 동적송전용량을 결정하는데 직접 이용할 수 있을 것이다.

풍력 블레이드의 결빙에 의한 공력특성 및 성능 변화 (Atmospheric Icing Effects on the Aerodynamic Characteristics and Performance of Wind Turbine Blade)

  • 박지호;명노신
    • 한국항공우주학회지
    • /
    • 제42권2호
    • /
    • pp.134-143
    • /
    • 2014
  • 추운 기후에서 운영되는 풍력터빈 시스템의 표면에 발생한 결빙으로 인하여 공기역학적 성능이 크게 저하될 수 있다. 이러한 결빙은 양력감소 및 항력증가를 야기하고, 발전효율에 부정적인 영향을 미치게 된다. 이로 인하여 풍력발전기의 성능저하 또는 과부하, 무게중심의 변화에 따른 과도진동, 결빙파편이 지상으로 떨어질 경우의 안전성 문제, 계기의 결빙으로 인한 계기 측정오차, 최악의 경우 풍력 시스템 정지 등의 문제가 발생한다. 본 연구에서는 결빙증식이 풍력 발전기의 공력특성에 미치는 영향을 CFD 기법을 이용해 분석하였다. 또한 결빙증식 결과를 바탕으로 BEM 기법을 적용시켜 삼차원 블레이드에 대한 공력성능을 계산하였다. 결빙의 두께는 상대적인 속도차이에 의해 블레이드 중심에서 끝단으로 갈수록 증가함을 알 수 있었고, 공기의 속도가 결빙증식에 미치는 주요 인자임을 확인하였다.

선박충돌 문제에 대한 해상교량의 유지관리 (Maintenance of the Sea-crossing Bridge for Ship Collision Problems)

  • 배용귀;이성로
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제20권6호
    • /
    • pp.56-64
    • /
    • 2016
  • 해상교량의 선박충돌 문제는 기본적으로 선박의 충격력에 의한 부가 하중의 빈도를 추정하는 것이므로 특정한 수용 기준을 만족하도록 설계하는 것도 중요하지만 공용기간동안 이러한 충돌 위험의 증가분을 어떻게 유지관리 해야 하는지도 매우 중요하다. 본 논문에서는 인천대교를 대상으로 선박충돌 문제에 대한 중간점검을 위하여 관련 계획, 주경간장, 형하고 및 충돌 위험도를 검토하였다. 특히, 충돌 위험의 증가분에 대하여 근시적인 해결방안으로 관련 연구결과 및 운항관련 지침 등을 검토하여 최적화된 운항 속도를 8노트로 제시하였으며, 근본적인 해결방안으로 설계 단계에서 대상선박 및 통행량의 합리적인 예측을 위한 기본 절차를 수립하고 예측의 불확실성을 수용할 수 있는 확률론적 예측 기법을 제안하였다. 향후 선박충돌 관련 유지관리에 대한 추가적인 연구와 공용중인 다른 해상교량의 즉각적인 중간점검이 필요할 것으로 판단된다.

상황정보 적응을 위하여 다형성을 이용한 SOA 웹서비스 구현 방안 (A SOA Web Service Implementation for Adapting to Context Changes using Polymorphism)

  • 윤회진
    • 인터넷정보학회논문지
    • /
    • 제9권5호
    • /
    • pp.73-83
    • /
    • 2008
  • 본 논문은 웹서비스로 구현되는 상황인식 어플리케이션에서 상황정보에 적응하는 방안으로서 다형성을 적용하여, 웹서비스 통합을 구현하고, 그를 통한 비용 감소의 효과를 보인다. 유비쿼터스 컴퓨팅의 대두로, 상황인식어플리케이션에 대한 관심이 높아지고 있으며, 그에 따른 상황정보 적응성 보장이 주요한 이슈로 등장하고 있다. 상황정보가 꾸준히 변화되어지고, 어플리케이션은 그 변화에 적응해야 하는데, 이때 보다 적은 비용으로 적응성을 해결하려고 하는 노력을 요구된다. 이는 최근 주목을 받는 서비스 기반 아키텍쳐를 통하여 웹서비스 기술을 보다 체계적으로 접근할 수 있다. 웹서비스로 구현되는 상황인식 어플리케이션의 경우, 서비스들의 통합 구현에 상황인식 적응성을 반드시 고려해야 하며, 나아가 보다 적은 비용으로 해결할 수 있는 방안을 요구하게 된다. 본 논문은 객체지향의 다형성 기술을 통하여, 통합 서비스를 구현하는 방안을 제안하고, 구체적인 웹서비스 구현을 분석하여, 제시한 통합 서비스 구현 방안이 적응성을 구현에 어느정도 수행 코드 감소를 가져오는지를 보인다.

  • PDF

스마트 조선소내 D2D 통신 기술 적용 방안 제안 (Proposal Scheme of a D2D Communication in Smart Shipyard)

  • 김수현;이성로;민상원
    • 한국통신학회논문지
    • /
    • 제39C권12호
    • /
    • pp.1261-1266
    • /
    • 2014
  • 스마트 조선소는 조선소내 모든 업무를 모바일 애플리케이션을 이용하며, 스마트 단말의 급속한 보급과 다양한 모바일 서비스로 인한 인프라의 과부하가 예상된다. 기존의 인프라의 과부하를 줄이기 위한 매크로셀 및 펨토셀, 코어 네트워크 장비의 증설은 문제가 있기 때문에, 본 논문에서는 스마트 조선소 네트워크에 기존의 인프라를 통한 통신에 비해 자원의 효율성을 높이고 인프라의 부하를 줄일 수 있는 D2D 통신 기술을 적용한다. 스마트 조선소내 D2D 통신 기술을 적용하기 위한 네트워크 구성과 D2D 단말 탐색 및 데이터 전송 방법과 트래픽 타입에 따른 데이터 전송 경로 방안을 제안하였다. 코어 네트워크의 과부화된 트래픽을 최적화된 경로로 보낼 수 있는지 기능 수행여부를 state transition diagram을 이용하여 확인하였다. 우리는 스마트 조선소내 D2D 통신 기술을 적용함으로써 기존의 통신 방법보다 더 효율적인 트래픽 처리가 가능할 것이다.

리피터를 이용한 IoT기기 관리시스템 (IoT device management system using repeater)

  • 배상중;정재안;황도연;정회경
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2018년도 춘계학술대회
    • /
    • pp.565-566
    • /
    • 2018
  • 기존 IoT 시스템들은 서버에서 디바이스의 정보를 처리하는 중앙 집중형 시스템이며 무선랜 네트워크를 사용하는 방식이 대다수를 차지하고 있다. 그러나 무선랜 네트워크의 신호가 닿지 않아 IoT 제품을 사용할 수 없거나 더 강한 신호의 무선랜 네트워크에 접속하는 문제가 발생할 수 있다. 이를 해결하기 위해 본 논문에서는 리피터를 이용하여 IoT 제품의 안정성을 유지하고, IoT 제품을 관리하며 서버에서 처리하는 데이터의 일부를 리피터에서 처리하여 서버의 부담을 줄이는 시스템을 제안한다. 무선랜 네트워크의 신호가 원인으로 생기는 문제는 리피터로 신호를 증폭함으로써 해결하고 서버에서 발생할 수 있는 과부화 문제는 리피터가 자신에게 연결된 IoT 제품을 관리함으로써 서버의 사용량을 줄이는 것으로 해결할 수 있을 것으로 사료된다.

  • PDF

Static behavior of stud shear connectors with initial damage in steel-UHPC composite bridges

  • Qi, Jianan;Tang, Yiqun;Cheng, Zhao;Xu, Rui;Wang, Jingquan
    • Advances in concrete construction
    • /
    • 제9권4호
    • /
    • pp.413-421
    • /
    • 2020
  • For steel-concrete girders made composite using shear studs, initial damage on studs induced by weld defect, unexpected overloading, fatigue and others might degrade the service performance and even threaten the structural safety. This paper conducted a numerical study to investigate the static behavior of damaged stud shear connectors that were embedded in ultra high performance concrete (UHPC). Parameters included damage degree and damage location. The material nonlinear behavior was characterized by multi-linear stress-strain relationship and damage plasticity model. The results indicated that the shear strength was not sensitive to the damage degree when the damage occurred at 2/3d (d is the stud diameter) from the stud root. An increased stud area would be engaged in resisting shear force as the distance of damage location from stud root increased and the failure section becomes inclined, resulting in a less reduction in the shear strength and shear stiffness. The reduction factor was proposed to consider the degradation of the shear strength of the damaged stud. The reduction factor can be calculated using two approaches: a linear relationship and a square relationship with the damage degree corresponding to the shear strength dominated by the section area and the nominal diameter of the damaged stud. It was found that the proposed method is preferred to predict the shear strength of a stud with initial damage.

모바일 환경에서 MPEG-4 비디오 스트림 전송을 위한 실시간 적응형 스케쥴링 프로토콜 (A Real-time Adaptive Scheduling Protocol for MPEG-4 Video Stream Transmission in Mobile Environment)

  • 김진환
    • 한국멀티미디어학회논문지
    • /
    • 제13권3호
    • /
    • pp.349-358
    • /
    • 2010
  • 모바일 환경의 비디오 스트리밍에서 클라이언트들은 작업 부하의 차이가 큰 비디오를 요청할 수 있기 때문에 적응성은 중요한 문제이다. 본 논문에서는 모바일 또는 무선 통신망에서 MPEG-4 비디오 스트림을 효율적으로 전송하기 위해 제한된 대역폭을 스케쥴링하는 기법이 제시된다. 수락 제어 단계에서는 요청된 각 비디오 대역폭이 평균 대역폭 요건에 따라 할당된다. 실제 스케쥴링 단계에서는 클라이언트들의 재생 상황에 더욱 적합한 스케쥴링이 수행될 수 있도록 하기 위해 클라이언트의 버퍼 수준에 따라 대역폭이 동적으로 할당된다. 제시된 RTA(Real-Time Adaptive) 스케쥴링 프로토콜에서는 버퍼 수준이 낮은 클라이언트에게 일시적으로 더 많은 대역폭이 할당될 수 있다. 버퍼 수준에 기반한 스케쥴링 정책을 사용하는 RTA 프로토콜은 일시적인 과부하 영향을 최소화하는 한편 재생시 실시간적 성능을 최대화할 수 있다. RTA 프로토콜의 성능은 다양한 실험을 통하여 측정되었으며 BSBA(Buffer Sensitive Bandwidth Allocation) 프로토콜과 비교한 결과 RTA 프로토콜이 더 많은 수의 프레임들을 전송함으로써 우수한 성능을 가지는 것으로 분석되었다.

Encryption Scheme for MPEG-4 Media Transmission Exploiting Frame Dropping

  • Shin, Dong-Kyoo;Shin, Dong-Il;Shin, Jae-Wan;Kim, Soo-Han;Kim, Seung-Dong
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제4권5호
    • /
    • pp.925-938
    • /
    • 2010
  • Depending on network conditions, a communication network could be overloaded when media are transmitted. Research has been carried out to lessen network overloading, such as by filtering, load distribution, frame dropping, and other methods. Among these methods, one of the most effective is frame dropping, which reduces specified video frames for bandwidth diminution. In frame dropping, B-frames are dropped and then I- and P-frames are dropped, based on the dependency among the frames. This paper proposes a scheme for protecting copyrights by encryption, when frame dropping is applied to reduce the bandwidth of media based on the MPEG-4 file format. We designed two kinds of frame dropping: the first stores and then sends the dropped files and the other drops frames in real time when transmitting. We designed three kinds of encryption methods using the DES algorithm to encrypt MPEG-4 data: macro block encryption in I-VOP, macro block and motion vector encryption in P-VOP, and macro block and motion vector encryption in I-, P-VOP. Based on these three methods, we implemented a digital rights management solution for MPEG-4 data streaming. We compared the results of dropping, encryption, decryption, and the quality of the video sequences to select an optimal method, and found that there was no noticeable difference between the video sequences recovered after frame dropping and the ones recovered without frame dropping. The best performance in the encryption and decryption of frames was obtained when we applied the macro block and motion vector encryption in I-, P-VOP.