본 연구에서는 한국형 지하수 프로그램 개발(3-DFM, 3-Dimensional Finite Difference Method)을 위하여 대수층에 있어 지형 지질상태가 지하수유동시스템내에서 동적거동을 하는 것으로 취급하여 유동과정의 알고리즘을 확립토록 하였다. 본 연구에서 개발된 3-DFM모델은 입력변수 자료에 대한 설정이 모두 한글로 구성되어 있으며, 각 입력자료와 매개변수들의 이해와 적용치에 대한 도움말을 설정하여 두었다. 따라서, 입력변수에 대해서는 아이콘을 입력변수에 두면 각각에 대한 상세한 정보를 알 수 있도록 설계하였다. 또한, 각 지층의 지질경계 상태나 초기수위자료를 지정할 때는 work sheet상에서 간단히 지정할 수 있도록 설계되어 있다. 그리고 각 대수층의 특성과 더불어 정류 및 부정류 해석시에 각 매개변수들에 대한 입력은 기존의 모델과 같이 복잡하지 않도록 활성칸이 설정되도록 설계되어 있다. 최종 입력자료를 이용한 분석결과에서는 우측에 입력자료에 대하여 설명과 더불어 좌측에 분석 결과치를 나타나게 하였으며 이에 대한 결과는 TXT파일로도 출력할 수 있도록 설정하였다. 본 연구에서 개발된 모델은 유한차분법을 이용한 수치모델이며, 실제 함양량을 적용하고 매개변수들을 결정하여 관측 지하수두치와 모의발생으로 얻은 계산 지하수두치를 비교 분석하여 개발모델의 적용성을 검토하였다. 본 연구에서는 제주도 세화리 및 송당리일대의 양수에 따른 지하수 유동시스템 해석을 위하여 3-DFM모델을 적용 분석한 결과, 정류상태에서 따른 관측치와 계산된 지하수두와의 상대오차백분율(E.P.)이
꽃노랑총채벌레(Frankliniella occidentalis)는 500종 이상의 기주를 가지고 토마토반점위조바이러스(Tomato spotted wilt virus; TSWV)를 매개하는 해충이다. 전 세계적으로 방제를 위해 노력하고 있지만 살충제를 이용한 방제는 저항성 그리고 환경 및 경제적 부담으로 인한 한계를 보였기 때문에 고정 정확도를 설정한 표본조사법(Fixed-precision level sampling plan)을 개발하였다. 고추(Capsicum annuum)의 꽃노랑총채벌레 성충 방제를 위한 표본 조사법은 공간분포분석, 표본추출 정지선 그리고 의사결정법으로 구성되었다. 표본추출은 식물체를 상단(지상에서 180 cm 이상), 중단(지상에서 120~160 cm 이상), 하단(지상에서 70~110 cm 이상)으로 나누어 각 높이별로 꽃 3개에서 나오는 꽃노랑총채벌레의 성충의 마리 수를 조사하였다. 표본 추출을 통해 꽃노랑총채벌레 성충의 밀도는 다른 식물체 위치(중단, 하단)보다 상단에서 높은 것으로 나왔다. 공간분포분석에서는 Taylor's power law (TPL)를 통해 도출한 각 위치별 계수를 공분산분석(ANCOVA)하여 차이를 비교하였다. ANCOVA 결과에서 도출된 절편과 기울기의 P 값이 각각 0.94, 0.87인 것을 통해 식물체 내 위치별로 차이가 없음을 확인한 후, 자료를 통합(pooling)하여 계산된 TPL 계수를 이용하여 표본추출 정지선을 구하였다. 꽃노랑총채벌레의 방제의사결정을 위한 방제밀도 수준(m0)은 문헌을 참조하여 3과 18로 설정하였으며 설정값(m0)을 이용해 최대표본수(Nmax)도 조사하였다. 조사 결과, m0=3, 18일 때 Nmax값은 각각 약 97개, 1149개로 계산되었다. 개발된 모델의 적합성 검정을 위해 분석에 사용하지 않은 독립자료를 이용해 Resampling Validation for Sampling Program (RVSP) 프로그램으로 개발된 표본추출법의 적합성 평가를 실시하였고 적합한 정확도를 보이는 것으로 조사되었다.
최근 강우강도 및 패턴이 변화함에 따라 전세계적으로 토양유실이 증가하고 있다. 그 결과, 수생태계 건전성이 악화되고, 농업작물이 피해를 입어 수확량이 감소된다. 그동안 유출 및 토양유실을 예측하거나 비점오염원을 감소시키는 연구가 많이 수행되어 왔다. USLE는 수년간 토양유실을 산정하는데 사용되어왔으나, 강우강도나 패턴변화를 적용하기에는 적절하지 못했다. 물리적 기반인 WEPP 모형은 다양한 강우강도 및 패턴변화를 적용하는데 적절하다. 본 연구에서는 WEPP 모형을 이용하여 Huff의 4분위, 다양한 강우간격, 설계강우에 따른 토양유실, 유출, 첨두유출을 산정하였다. 5분간격 강우 데이터와 60분 간격 강우 데이터를 비교한 결과 토양유실은 24%, 유출은19%, 첨두유출은 16%가 차이나는 것으로 나타났다. 유출 및 토양유실이 5분 간격 강우량에서 실측치와 가장 유사한 것으로 나타나 강우데이터의 간격이 짧을수록 더 정확하게 모의할 수 있는 것으로 나타났다. Huff의 4분위를 이용하여 토양유실량, 유출량, 첨두유출량을 산정한 결과 토양유실량, 유출량, 첨두유출량 모두 3분위에서 가장 높게 발생하는 것으로 나타났다. 강원도 홍천지역 빈도별 확률강우를 이용하여 토양유실량, 유출량, 첨두유출량의 변화를 모의하였다. 2년 빈도와 300년 빈도에서 강우량은 167% 증가하였다. 유사량과 유출량, 첨두유출량은 각각 906.2%, 249.4%, 183.9% 증가하여 유사량의 증가율이 가장 큰 것으로 나타났다. 본 연구의 결과에서 보이는 바와 같이 WEPP 모형을 이용하여 향후 기후변화에 따른 유출 및 토양유실의 예측이 가능할 것으로 판단된다.
최근 가상-현실 융합의 VnR(Virtual and Real worlds)은 가상 환경 속에서 경험할 수 있는 실재감을 추구하고 있다. 이러한 가상 세계의 실감화 평가는 다수의 독립적 요인으로 구성된 주관평가에 근거하여 평가 되고 있다. 그러나 기존 대부분의 연구에서는 가상 실감화를 측정하는 문항 및 요인 규명에 대하여 논리적 근거가 제시되지 않고 있으며, 측정 방법에 대한 타당성 검증이 미비한 실정이다. 또한 일부 연구는 가상 환경에 의한 실재감을 시각적 요소 측면에서 진행 하였다. 따라서 본 연구에서는 가상 실감화의 구성요소인 실재감의 시각적 요소를 중점으로, 더욱 합리적이고 타당하게 주관적 가상 실감화 측정 방법을 제안하고자 한다. 이를 위해, 가상 실감화를 연구한 문헌과 전문가를 대상으로 21개의 문항을 수집하였다. 200명의 피험자를 대상으로 극사실주의 인물 이미지를 제시하여 상기 문항으로 구성된 설문지를 통하여 5점 척도로 보고하게 하였다. 측정된 데이터에 대해 탐색적 요인분석을 수행하여, 요인 적재량 값이 적은 문항은 제거하였으며, 도출된 요인 모형이 적합한지에 대해서 확인적 요인분석을 통하여 통계적으로 타당함을 검증하였다. 요인 분석 결과 가상 실감화의 실재감을 측정하기 위한 주요 세 가지 요인이 결정되었다. 이는 시각적 실재감(3 문항), 시각적 몰입감(7 문항), 시각적 상호작용(4 문항)으로 구성 되었다. 또한 실재감의 시각적 요소를 기반으로 3차원 가상 안구 모델을 표현함에 따라 제안하는 가상 실감화 측정 결과에 영향을 끼침을 확인하였다. 이 결과는 논리적 근거를 통하여 수집된 문항에 대해서 합리적이고 타당하게 가상 실감화의 실재감(시각적 요소) 정도를 평가할 수 있는 측정 방법을 제안하였으며, 제안된 측정 방법의 타당도 검증을 통하여 합리적으로 실감화 정도를 평가함을 검증 하였다.
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
본 연구는 잣나무 성숙임분을 대상으로 임령별 국지 기후 조건을 지형기후학적 방법과 공간통계 기법에 의하여 추정하여 잣나무 임분의 연도별 생식생장에 미치는 국지기후의 영향을 구명하고자 하였다. 이를 위해 지형-기후 관계식을 이용하여 연구 대상지의 평균기온, 최고기온, 최저기온, 상대습도, 강수량, 일조시수, 맑은 날수, 흐린 날수에 대하여 월별ㆍ기후치별 평년 값을 도출하고, 공간통계기법에 의하여 연도별ㆍ월별 기후치를 산출하였다. 또한 연구 대상지의 잣나무 임분에 대한 연도별 구과 및 종자 결실량, 낙과량, 형질 등 생식생장의 특성을 파악하였다. 이상의 자료에 근거하여 잣나무 성숙임분의 생식생장에 미치는 국지기후의 영향을 상관분석 및 회귀분석을 통하여 구명한 격과는 다음과 같다. 1년생 구과의 착과수는, 화아분화 연도의 6월과 7월의 평균 일 최저기온, 화아분화 연도의 6월과 7월의 총 강수량, 화아분화 연도 11월 부터 개화수분당년도 4월까지의 흐린 날수 합계와 높은 부의 상관이 인정되어, 화아분화 연도의 강수량이 적고 일조시간이 많으면 착과수도 많아지는 것으로 파악되었다. 2년생 구과의 결실량과 유의적인 상관관계를 나타낸 기후지수가 없었다. 다만 가장 상관계수가 높은 지수로는 결실전년(개화수분당년) 12월부터 결실년도 2월까지 3개월간의 겨울철 강수량이 정의 상관관계를 나타냈다. 낙과량에 영향을 미친 기후요소는 개화수분당년 6월부터 익년 8월까지 15개월 간의 흐린 날수 합계와 개화수분당년 11월부터 익년 3월까지 동계 5개월 간의 강수량이 상관이 높은 것으로 나타났고, 낙과율에 있어서는 개화수분당년 6월부터 익년 8월까지 15개월간의 흐린날수 합계가 가장 영향을 많이 미치는 기후지수로 판명되었다. 구과의 쭉정이량은 구과 성숙 이전의 동계 3개월 간의 강수량과 가장 높은 상관을 보이고 있었으며, 쭉정이율의 경우에는 상대적으로 많은 5개의 기후 지수와 10% 이내의 높은 상관관계를 인정할 수 있었는데, 특히 구과 성숙 이전의 동계 3∼5개월 간의 강수량과 높은 정의 상관관계를 보여 동계기간동안 강수량이 많으면 광합성량이 감소하여 임목의 영양상태가 불건전하게 됨으로써 수정에 방해가 되고 종국적으로는 불량한 종자의 비율이 높아지는 결과를 초래하는 것으로 보인다. 구과무게는 개화수분당년 6월 부터 익년(결실년도) 8월까지 15개월 간의 강수량과 부의 상관을 보여, 수분이후 결실과정까지 강수량이 많으면 광합성에 장애를 주어 구과 1개의 무게가 상대적으로 적어지는 것으로 나타났다. 한편 종자 1개의 평균무게는 결실전 동계기간동안의 강수량 높은부의 상관을 보여 겨울철 강수량이 많으면 광합성율이 저하되고 이는 다시 종자 때의 무게가 적어지는 결과를 보이는 것으로 판단된다. 구과피무게는 결실 전년 11월부터 익년 3월까지 5개월 간의 맑은 날수와 겨울철인 12월부터 2월까지 3개월 간의 맑은 날수와 부의 상관을 보인 반면에, 결실 전년도 5월의 평균기온과는 정의 상관관계를 보였다. 구과피율의 경우에도 구과피 무게와 동일한 경향을 보여, 결실전 동계기간동안의 맑은 날수는 종자생산에 긍정적인 영향을 주는 반면, 결실 전년도 5월의 평균기온이 높으면 부정적인 영향을 주는 것으로 파악되었다.
태양열(太陽熱)을 이용(利用)한 곡물(穀物)의 건조(乾燥)와 저장(貯藏)을 겸할 수 있는 농가용(農家用) 태양열(太陽熱) 저장고(貯藏庫)의 개발(開發)에 필요(必要)한 기초자료(基礎資料)를 얻기 위(爲)하여 구조(構造)가 간단(簡單)하고 가격(價格)이 저렴한 콘크리트 벽체의 저장고(貯藏庫)와 그 지붕을 대신(代身)한 태양열집열기(太陽熱集熱器)를 설계(設計) 제작(製作)하여 집열기(集熱器)의 성능(性能)을 실험(實驗)에 의(依)하여 구(求)하였으며 집열기(集熱器)에서 가열(加熱)된 공기(空氣)와 상온통풍(常溫通風)에 의(依)한 벼의 건조특성(乾操特性)을 비교(比較) 분석(分析)하였다. 건조(乾操)된 곡물(穀物)의 저장시(貯藏時)에 그 온도(溫度)를 예측(豫測)할 수 있는 simulation model을 개발(開發)하여 그 적합성(適合性)을 검정(檢定)하고 저장곡물(貯藏殺物)의 각(各) 부위(部位)에 대(對)한 온도(溫度)의 변화(變化)를 분석(分析)한 결과(結果)들을 요약(要約)하면 다음과 같다. 1. 본(本) 실험(實驗)에 설계(設計) 제작(製作)된 태양열집열기(太陽熱集熱器)의 효율(效率)은 평균(平均) 26%였으며 총열전달계수(總熱傳達係數)는 약(約)
Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.
본 연구에서는 유방암 진단용 감마카메라 제작 시에 고려되어야 하는 섬광체의 크기와 섬광체 면의 적절한 표면처리가 카메라의 민감도와 위치 분해능에 미치는 영향을 연구하기 위하여 섬광의 광학적 특성을 몬테카를로(Monte Carlo) 시뮬레이션 방법을 이용하여 고찰하였다. 섬광체는 NaI(TI) 결정체로 크기가 60 mm