• 한국유체기계학회 논문집
• /
• 제10권3호
• /
• pp.47-54
• /
• 2007

A rotordynamic analysis was performed with a dry vacuum pump, which is a major equipment in modem semiconductor and LCD manufacturing processes. The system is composed of screw rotors, lobes picking air, helical gears, driving motor, and support rolling element bearings of rotors and motor. The driving motor-screw rotor system has a rated speed of 6,300rpm, and was modeled utilizing a rotordynamic FE method for analysis, which was verified through the results of its 3-D finite element model. As loadings on the bearings due to the gear action were significant in the system considered, each resultant bearing load was calculated determinately and indeterminately by considering the generalized forces of the gear action as well as the rotor itself. Each resultant bearing loading was used in calculating each stiffness of rolling element bearings. Design goals are to achieve wide separation margins of critical speeds and favorable unbalance responses of the rotor in the operating range. Then, a complex rotordynamic analysis of the system was carried out to evaluate its forward synchronous critical speeds, whirl natural frequencies and mode shapes, and unbalance responses under various unbalance locations. Results show that the entire system is well designed in the operating range. In addition, the procedure of rotordynamic analysis for dry vacuum pump rotor-bearing system was proposed and established.

• 한국소음진동공학회논문집
• /
• 제17권10호
• /
• pp.967-975
• /
• 2007

A rotordynamic analysis was performed with a dry vacuum pump, which is a major equipment in modern semiconductor and LCD manufacturing processes. The system is composed of screw rotors, lobes picking air, helical gears, driving motor, and support rolling element bearings of rotors and motor. The driving motor-screw rotor system has a rated speed of 6,300 rpm, and was modeled utilizing a rotordynamic FE method for analysis, which was verified through 3-D FE analysis and experimental modal analysis. As loadings on the bearings due to the gear action were significant in the system considered, each resultant bearing load was calculated by considering the generalized forces of the gear action as well as the rotor itself. Each resultant bearing loading was used in calculating each stiffness of rolling element bearings. Design goals are to achieve wide separation margins of lateral and torsional critical speeds, and favorable unbalance responses of the rotor in the operating range. Then, a complex rotordynamic analysis of the system was carried out to evaluate its forward synchronous critical speeds, whirl natural frequencies and mode shapes, unbalance responses under various unbalance locations, and torsional interference diagram. Results show that the entire system is well designed in the operating range. In addition, the procedure of rotordynamic analysis for dry vacuum pump rotor-bearing system was proposed and established.

• Investigative Magnetic Resonance Imaging
• /
• 제21권4호
• /
• pp.223-232
• /
• 2017

Purpose: To report the use of multiband accelerated echo-planar imaging (EPI) for resting-state functional MRI (rs-fMRI) to achieve rapid high temporal resolution at 3T compared to conventional EPI. Materials and Methods: rs-fMRI data were acquired from 20 healthy right-handed volunteers by using three methods: conventional single-band gradient-echo EPI acquisition (Data 1), multiband gradient-echo EPI acquisition with 240 volumes (Data 2) and 480 volumes (Data 3). Temporal signal-to-noise ratio (tSNR) maps were obtained by dividing the mean of the time course of each voxel by its temporal standard deviation. The resting-state sensorimotor network (SMN) and default mode network (DMN) were estimated using independent component analysis (ICA) and a seed-based method. One-way analysis of variance (ANOVA) was performed between the tSNR map, SMN, and DMN from the three data sets for between-group analysis. P < 0.05 with a family-wise error (FWE) correction for multiple comparisons was considered statistically significant. Results: One-way ANOVA and post-hoc two-sample t-tests showed that the tSNR was higher in Data 1 than Data 2 and 3 in white matter structures such as the striatum and medial and superior longitudinal fasciculus. One-way ANOVA revealed no differences in SMN or DMN across the three data sets. Conclusion: Within the adapted metrics estimated under specific imaging conditions employed in this study, multiband accelerated EPI, which substantially reduced scan times, provides the same quality image of functional connectivity as rs-fMRI by using conventional EPI at 3T. Under employed imaging conditions, this technique shows strong potential for clinical acceptance and translation of rs-fMRI protocols with potential advantages in spatial and/or temporal resolution. However, further study is warranted to evaluate whether the current findings can be generalized in diverse settings.

• 한국컴퓨터정보학회논문지
• /
• 제27권8호
• /
• pp.143-149
• /
• 2022

특허문서는 연구 개발된 기술에 대한 상세한 결과를 포함하고 있기 때문에 효과적인 기술분석을 위한 다양한 특허분석 방법에 대한 연구가 진행되고 있다. 특히 통계학과 머신러닝 알고리즘에 의한 정량적인 특허분석에 대한 연구가 최근 활발하게 이루어지고 있다. 정량적 특허분석에서 가장 많이 사용되는 특허 데이터는 기술 키워드이다. 기술 키워드 데이터를 분석하는 기존의 방법은 대부분 음의 무한대부터 양의 무한대까지 실수 공간 전체를 확률변수의 값으로 갖는 가우시안 확률분포에 기반한 모형이었다. 본 논문에서는 이론적으로 0부터 양의 무한대까지의 값을 갖는 특허 키워드의 빈도 데이터를 분석하기 위하여 감마 확률분포를 활용한 모형을 제안한다. 또한 감마 회귀모형의 회귀방정식을 결정하기 위하여 키워드 간의 기술 연관성을 시각화하는 2-모드 네트워크를 구축한다. 제안 방법과 기존의 가우시안 기반의 분석모형 간의 성능평가를 위하여 실제 특허 데이터를 수집하여 분석한다.

• 한국전자파학회논문지
• /
• 제10권4호
• /
• pp.582-593
• /
• 1999

본 논문에서는 무궁화 III호 위성체용 Ka-밴드 다이플렉서의 설계를 위해 모드매칭법에 의해 산란행렬을 계산하여 설계한 필터의 전달특성을 분석하고, 대칭적 유도성 아이리스 구조와 전계면 금속삽입 구조로 설계된 2개의 대역통과 필터를 자계면 T-접합에 의한 합성방법으로 Ka 밴드 위성체용 다이플렉서를 설계, 제작 하여 그 설계 방법에 대한 타당성 여부를 검증하였다 제작된 다이플렉서는 위성체에서 송.수선 펼터의 개별 사용에 따른 크기 및 무게의 증가를 효과적으로 감소시킬 수 있으며, 송선필터의 경우 아이리스를 도파관 자계변 외벽으로 돌출시키는 구조로 설계함으로써 펼터 자체가 방열판 구실을 하여 고전력 전송에 따른 펼터 의 특성 변화를 최소화하였다. 또한 대부분의 도파관 펼터에서 동작특성을 보정하기 위해 사용되는 미세 보정 나사의 사용을 배제함으로써 제작의 단순화와 위성체용으로서의 내구성과 선뢰도를 향상시켰다. 제작된 Ka-밴드 위성체용 다이플렉서는 2개의 펼터(Rx : $30.485\pm0.4 GHz$, Tx : $20.755\pm0.4 GHz$) 모두 통과대역에 서 1.2 dB 미만의 삽입손실(insertion loss)과 15dB 보다 좋은 반사손실(return loss) 특성을 얻었고, 송.수신 필터간 65dB 이상의 분리도(isolation)를 나타내었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.334-334
• /
• 2013

In the past decade, the infrared detectors based on intersubband transition in quantum dots (QDs) have attracted much attention due to lower dark currents and increased lifetimes, which are in turn due a three-dimensional confinement and a reduction of scattering, respectively. In parallel, focal plane array development for infrared imaging has proceeded from the first to third generations (linear arrays, 2D arrays for staring systems, and large format with enhanced capabilities, respectively). For a step further towards the next generation of FPAs, it is envisioned that a two-dimensional metal hole array (2D-MHA) structures will improve the FPA structure by enhancing the coupling to photodetectors via local field engineering, and will enable wavelength filtering. In regard to the improved performance at certain wavelengths, it is worth pointing out the structural difference between previous 2D-MHA integrated front-illuminated single pixel devices and back-illuminated devices. Apart from the pixel linear dimension, it is a distinct difference that there is a metal cladding (composed of a number of metals for ohmic contact and the read-out integrated circuit hybridization) in the FPA between the heavily doped gallium arsenide used as the contact layer and the ROIC; on the contrary, the front-illuminated single pixel device consists of two heavily doped contact layers separated by the QD-absorber on a semi-infinite GaAs substrate. This paper is focused on analyzing the impact of a two dimensional metal hole array structure integrated to the back-illuminated quantum dots-in-a-well (DWELL) infrared photodetectors. The metal hole array consisting of subwavelength-circular holes penetrating gold layer (2DAu-CHA) provides the enhanced responsivity of DWELL infrared photodetector at certain wavelengths. The performance of 2D-Au-CHA is investigated by calculating the absorption of active layer in the DWELL structure using a finite integration technique. Simulation results show the enhanced electric fields (thereby increasing the absorption in the active layer) resulting from a surface plasmon, a guided mode, and Fabry-Perot resonances. Simulation method accomplished in this paper provides a generalized approach to optimize the design of any type of couplers integrated to infrared photodetectors.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 추계 학술대회 논문집
• /
• pp.321-331
• /
• 2005

과학기술부고시 2003-12호 "원자로시설부지 수문 및 해양특성 조사평가 기준" 이 신규 제정되어, 원전 액체 방사성 유출물에 대한 삼차원적인 해양확산 평가 필요성이 커지고 있다. 한국수력원자력(주)와 전력연구원은 신고리, 신월성, 신울진 원 전등 다수의 신규원전 건설이 계획 또는 추진되고 있는 동해안을 대상으로 광역 및 부지별 입지특성을 반영한 해양확산 평가기술을 개발하고 있다. 동해안의 해수유동은 동해 해수순환에 의해 영향을 받기 때문에 원전 주변의 방사성 물질의 해양확산을 보다 정확히 평가하기 위해서는 동해 해수순환에 대한 이해가 선행되어야한다. 따라서 본 연구에서는 일본 큐슈대학교 응용역학연구소에서 개발한 RIAMOM 모델을 근간으로 동해 해수순환 모델링을 수행하였다. 모델 영역은 $126.5^{\circ}E{\~}142.5^{\circ}E$ $33^{\circ}N{\~}52^{\circ}N$, 수직층은 20개로 나누었다. 이 모델은 JODC, KNFRDI, 그리고 ECMWF로 부터 구하였다. 모델링 결과, 동해 해수순환을 비교적 잘 모의하고 있는 것으로 나타났다. 향후 모델링 결과를 정량적으로 평가하기 위해 인공위성 추적 부이를 이용하여 확산 검증 실험을 실시할 예정이다.