• Archives of Reconstructive Microsurgery
• /
• v.19 no.1
• /
• pp.7-11
• /
• 2010

Interpostion arthroplasty with allograft has been known as a useful option for the shoulder arthropathy, but it has a limitation to immune response. We performed the pectoralis major muscle transfer for shoulder arthropathy. From January 2007 to December 2007, we performed the pectoralis major muscle transfer in 2 patients. They were 1 man and 1 woman, and the mean age of the patients was 70 years (range, 65 to 75). The average follow-up after surgery was 13 months (range, 12 to 14). We analyzed the clinical results by the American Shoulder and Elbow Surgeons (ASES) Score, and evaluated the pain by Visual Analogue Scale. The level of pain reduced from a preoperative average of 10 to a postoperative average of 1. The ASES scores increased from a preoperative mean of 9 to a postoperative mean of 58. These results indicated that interposition arthroplasty with the pectoralis major muscle transfer is a reliable treatment method for the shoulder arthropathy improving shoulder pain, and patient satisfaction.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.6
• /
• pp.61-66
• /
• 2009

For a spread-moored FPSO (Floating Production, Storage, & Off-loading) subjected to environmental excitation from waves, current, and wind, a procedure to determine optimum length and stiffness of mooring lines is suggested using quasi-static frequency domain response analyses. Coupled relations between design parameters are closely examined. In consideration of this, optimized design parameters are proposed based on minimum weight condition. The initial design parameters for numerical analyses are calculated using the static catenary equation of mooring lines. It is demonstrated the line tension and vessel's offset are influenced by the mooring line length and stiffness. Accordingly it is suggested the optimum vessel's offset range should be determined considering line fatigue damage. The availability and limitation of the application of quasi-static analysis method for spread mooring system are explained by comparing the result of time domain analysis with one of frequency domain analysis.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.7
• /
• pp.45-52
• /
• 2019

In recent years, there has been a demand for a residential supply model that can actively and flexibly cope with various housing demands in the changing paradigm of public rental housing. This study focuses on the two-step supply system that has been studied in Japan. It was used to examine and analyze cases to recommend a supply plan that can be used for domestic public rental housing. In more detail, the literature review of the two-step supply system discloses that four types by supply methods (A-1, A-2, B-2, and C-2) and four types of relationship (construction and management combine entities type, management entity type, construction entity type, a separated entity type) can be categorized. In addition, from the actual case study, it revealed that the way of linking and supplying activities among the entity can have a great influence on "ease of supply (supply)", "diversity of housing demand (diversity)," and "quality of construction (construction)". "Ease of supply (supply)" refers to whether the construction entity is separated, and the owner is a manager. "Diversity" refers to whether the management subject is separated, and if the owner is also the constructor or the manager. "Construction" is whether the management entity is connected and managed by the management entity and can be evaluated in "Good", "Middle", and "Bad" level. As a summary, even if the existing public rental housing in Korea can be separated into a skeleton and infill system, the result suggested that it has a limitation on response to residential demand. In addition, the paper was able to propose an improved plan to make the infill as a secondary operator.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.816-820
• /
• 2011

A method for increasing the difference of side-lobe level in spherical microphone array is presented. In array signal processing, it is known that narrow interval between sensors can increase the difference between main lobe and side-lobe of array response which eventually increase the source recognition capability. Recent commercial array being used, however, have shown certain limitation in using the number of sensors due to its costs and geometrical size of array. To overcome this problem, we have adapted MEMS sensors into spherical microphone array. To check out the improvement, two different types of spherical microphone array were designed. One array is composed with 32 regular instrument microphones and the other one is 85 MEMS sensors. Simulation and experiments were conducted on a sinusoidal noise source with two arrays. The time history data were analyzed with spherical harmonic decomposition and beamforming technique. 85 MEMS sensors array showed the improved side-lobe level suppression by more than 4 dB above the frequency content of 2 kHz compared to 32-sensor array.

• The Journal of the Korea Contents Association
• /
• v.14 no.8
• /
• pp.442-452
• /
• 2014

The purpose of this study is to identify the effect of job satisfaction on turnover intention by employment type, suggest positive influence to the HRM. The questionnaire was distributed from February 3rd to 23rd, of the 300 distributed questionnaire 271 copies were used in the analysis by t-test and multiple regression method to give a response rate of 90.3%. The results of the study were as followed; Firstly, it was found that the factors of job satisfaction, work itself and superiors are significant differences by employment type. Secondly, it appeared that turnover intention influenced by job satisfaction was revealed to negative significant results by work itself, promotion and payment. Based on these findings, this paper suggests implications and limitation of the research as well as future directions for the study.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.6 s.336
• /
• pp.53-60
• /
• 2005

Considerable efforts has been recently devoted to the determination of accurate channel models for the power line environment, both for the indoor and outdoor cases. The common limitation of the known and previously published models is the particular type of approach followed. This paper is concerned with a power line channel characteristic measurement for the more fast and efficiently power line communication experiment. The need arises from the fact that indoor power cables consist of conductors and inductors. A capacitive load simulator is a essential equipment in the power line modem development for indoor power line network. We accomplished a channel data base by the frequency response method about the total 224 capacitor load cases. On the basis of this measurement modeling it is here revealed that the power line communication channel is a more deterministic media.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.2
• /
• pp.58-65
• /
• 2001

Recently, a 5-degrees-of-freedom (DOF) reverberation model was proposed as a method of representing subjective perception of reverberation as objective measures[1]. This model approximates sound energy decay curve by five objective measures, widely used in which have been concert hall acoustics. However, it is note worthy that there can be infinite number of impulse responses which correspond to a selected 5-DOF reverberation model. There may exist some filters making very unnatural and unrealistic sound. In this paper, the limitation of the 5-DOF reverberation model when it is used as a filter design criteria is investigated. When a 5-DOF reverberation model is given, additional constraints to get natural reverberation are suggested. This is based on the listening tests for several quite different source sounds.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.3
• /
• pp.41-48
• /
• 2002

The bandwidth limitation of traveling-wave electroabsorption modulator(TW-EAM) is determined by the transit time, the velocity-mismatch between optical-wave and microwave, the impedance-matching, the dispersion and the microwave loss. In this paper, we introduce an hovel impulse response of TW-EAM considering transit time as well as velocity-mismatch. We analyze the effect of transit-time and velocity-mismatch at the same time, using the FDTD method. We investigate the modulation bandwidth by changing the depth of the intrinsic region. We suggest that the optimum depth of the intrinsic region is 0.2${\mu}{\textrm}{m}$ when the absorption coefficient($\alpha$) is 0.2${\mu}{\textrm}{m}$-1.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.2878-2885
• /
• 2012

In this study, the training and sporting equipment for leg rehabilitation featuring the MR fluids is proposed. The compact MR fluid brake is designed and manufactured to apply to the rehabilitation training and sporting mechanism. The resistance characteristic of the MR fluid brake is controllable by varying the magnetic field around the fluid. Under consideration of spatial limitation, design parameters which are related with the magnetic strength are determined to maximize to a torque using finite element method. The FE analysis is performed using a commercial code, ANSYS Workbench. The proposed brake device is manufactured, and its field-dependant torque is experimentally evaluated. When the electric current is supplied, the torque of the MR fluid brake is increased and the response is very fast. Depending on the strength of the current supply, torques of the MR fluid brake also increase similar to Bingham property of MR fluid.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.2
• /
• pp.94-103
• /
• 2003

In case of environment requiring safety such as human body and requiring flexible shape, a conventional mechanical actuator system does not satisfy requirements. Therefore, in order to solve these problems. a research of various smart material such as EAP (Electro Active Polymer), EAC (Electro Active Ceramic) and SMA (Shape Memory Alloy) is in progress. Recently, the highest preferring material among various smart material is EP (Electrostictive Polymer), because it has very fast response time, powerful force and large displacement. The previous researches have been studied properties of polymer and simple control, but present researches are studied a polymer actuator. An EP (Electostrictive Polymer) actuator has properties which change variably ils shape and environmental condition. Therefore, in order to coincide with a user's purpose, it is important not only to decide a shape of actuator and mechanical design but also to investigate a efficient controller. In this paper, we constructed the control logic with an adaptive fuzzy algorithm which depends on the physical properties of EP that has a dielectric constant depending on time. It caused for a sub-actuator to operate at the same time that a sub-actuator system operation increase with a functional improvement and control efficiency improvement in each actuator, hence it becomes very important to manage it effectively and to control the sub-system which Is operated effectively. There is a limitation on the management of Main-host system which has multiple sub-system, hence it brings out the Multi-Vehicle Control process that disperse the task efficiently. Controlling the multi-dispersion system efficiently, it needs the research of Main-host system's scheduling, data interchange between sub-actuators, data interchange between Main-host system and sub-actuator system, and data communication process. Therefore in this papers, we compared the fuzzy controller with the adaptive fuzzy controller. also, we applied the scheduling method for efficient multi-control in EP Actuator and the algorithm with interchanging data, protocol design.