• Journal of electromagnetic engineering and science
• /
• 제10권3호
• /
• pp.121-126
• /
• 2010

A long range UHF RFID tag with a rectangular metallic cavity structure is proposed for various applications with metallic objects. The proposed tag consists of a rectangular metallic cavity structure and a folded dipole antenna which is located on top of the cavity. The tag is designed for Korean UHF RFID band(910~914 MHz) and the bandwidth, which satisfies the -10 dB input reflection coefficient requirement, is approximately 1.3 %(904~916 MHz). Measurement demonstrates that the proposed tag shows long reading range up to 15 m when it is placed on a metallic plate.

• 보존과학회지
• /
• 제6권2호
• /
• pp.141-148
• /
• 1997

각종 국토개발사업이 본격적으로 시작된 1970년대 이후 그에 따른 발굴조사도 매년 증가되고 있다. 다양한 재질로 이루어진 유물은 출토후 보관환경에 따라 돌이킬 수 없는 손상을 받을 수 있다. 출토 유물의 보존에 대한 중요성은 증가되고 있으나, 발굴을 담당하는 기관과 비교하여, 출토된 유물을 보존처리하는 기관은 소수에 불과한 실정이다. 일반적으로 출토된 금속유물은 불안정하여 쉽게 손상되어진다. 특히 주조철제는 발굴후 건조되지 않도록 해야 한다. 이는 출토된 주조철제가 흙, 부식층과 금속심으로 이루어진 층 사이에서 건조로 인해 유물이 순간적으로 붕괴되어지기 때문이다. 출토된 금속유물의 안전한 보존방법은 다음과 같이 요약할 수 있다. (1)먼저 발굴현장에서 금속유물은 환경변화에 따른 손상을 방지하기 위해 유물포장용 특수비닐로 밀봉처리 하거나 알칼리 용액속에 침적시키는 것이다. (2)현장에서 임시 보존처리후 유물은 보존처리실에서 안전한 방법에 의한 처리를 해야 한다. (3)처리된 유물은 일정한 온${\cdot}$습도 유지, 주기적인 상태조사, 자외선 차단 등 안정한 보관환경을 유지시켜야만 재부식을 방지할 수 있다.

• 대한임베디드공학회논문지
• /
• 제18권3호
• /
• pp.109-116
• /
• 2023

This paper presents a network-based automation system for the detection of metallic objects in food and livestock. A metal detector is a core equipment used for the inspection required by HACCP. Since the existing metal detectors are manufactured as a single-body equipment, it is difficult to take into account various user requirements for the system. In order to overcome the drawback, this study presents a network-based automation system for metal detector utilizing an industrial fieldbus and modular components. The proposed system can effectively consider the various customer requirements and control schemes. The proposed system can also achieve the improvement in speed and success rate of detecting metallic objects. The effectiveness of the proposed system is demonstrated through a various experiments.

• 제어로봇시스템학회논문지
• /
• 제20권2호
• /
• pp.120-125
• /
• 2014

Conventional handheld metal detectors use a single induction coil to detect the metallic parts of explosive objects, and the detector generates an acoustic signal from its magnetic response to a metallic object so that an operator can confirm the existence of mines. Though metal detectors have very useful detection mechanisms to find mines, it is easy to cause a high false alarm ratio due to the detection of non-explosive metallic items such as cans, nails and other pieces of metal, etc. Also, because of the physical characteristic of a metal detector it is hard to detect non-metallic objects such as mines made of wood or plastic. Furthermore, the operator must move it to the left and right slowly and repeatedly to attain enough sensor signals to confirm the existence of mines using only a monotonous acoustic signal. To resolve the disadvantages of handheld detectors, many new approaches have been attempted, such as an arrayed detector and a visualization algorithm based on metal/non-metal sensor. In this paper, we introduce a visualization algorithm with a metal/non-metal complex sensor, an arrayed metal/non-metal sensor and the their testing and evaluation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.469-471
• /
• 1995

This paper describes the effect of floating metallic object on do flashover characteristics in all gap producing unipolar ion flow field. Needle-to-plane electrodes of 120mm in gap length were used as the main gap electrode and the tested metallic objects were spheres with the radius of 2,10 and 15mm or needles from 5 to 40mm long. The characteristics of flashover voltage vs. location of the floating object are different completely with the shape of the floating metal and polarity of the applied voltage.

• ETRI Journal
• /
• 제28권2호
• /
• pp.216-218
• /
• 2006

This letter presents the design for a low-profile planar inverted-F antenna (PIFA) that can be stuck to metallic objects to create a passive radio frequency identification (RFID) tag in the UHF band. The designed PIFA, which uses a dielectric substrate for the antenna, consists of a U-slot patch for size reduction, several shorting pins, and a coplanar waveguide feeding structure to easily integrate with an RFID chip. The impedance bandwidth and maximum gain of the tag antenna are about 0.3% at 914 MHz for a voltage standing wave ratio (VSWR) of less than 2 and 3.6 dBi, respectively. The maximum read range is about 4.5 m as long as the tag antenna is on a metallic object.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.267-270
• /
• 2005

An RFID patch antenna for metallic object has been designed. The effects of variation of distance between the tag antenna and ground of the antenna have been studied. Various dielectric constants, thickness, permittivity, width of transmission line and length of transmission line have been used to design the better tag antenna for metallic object.

• 한국표면공학회지
• /
• 제8권1호
• /
• pp.1-9
• /
• 1975

The crorosion film of gilt bronz, silver and iron objects, which were excaved from Ancient Tomb of Silla Dynasty, was removed by the electrolytic reduction process. These metallic objects were mainly investigated for microstructure, designs and gilting film etc. Most iron objects might be made by hot forging process. The cold extrusion technique might be used for gold and silver objects, in addition to an amalgam method might be applied for the gilting Au film on Cu-alloy surface. For the gilting on glass surface, first, a Cu alloy was cladded on glass , next, Au-film was obtained on the Cu-ally by the amagum method.

• 센서학회지
• /
• 제24권3호
• /
• pp.169-174
• /
• 2015

In this study, we developed a system to detect the various defects in the metallic objects using the phenomenon that the defects cause the changes of the natural resonant frequencies. Our system consists of a FFT Amp, an Auto Impact Hammer, a Hammer controller and a PC. Auto Impact Hammer creates vibrations in the metallic objects when tapped on the surface. These vibrational signals are converted to the voltage signals by an acceleration sensor attached to the metallic part surface. These analog voltage signals were fed into an ADC (analog-digital converter) and an FFT (fast fourier transform) conversion in the FFT Amp to obtain the digital data in the frequency domain. Labview graphical program was used to process the digital data from th FFT amp to display the spectrum. We compared those spectra with the standard spectrum to find the shifts in the resonant frequencies of the metal parts, and thus detecting the defects. We used PCB's acceleration sensor and TI's TMS320F28335 DSP (digital signal processor) to obtain the resolution of 2.93 Hz and to analyze the frequencies up to 44 kHz.

• 보존과학연구
• /
• 통권7호
• /
• pp.292-303
• /
• 1986

The purpose of this paper is to select the suitable resin as changed in environmental and ingredients, in the conservation of metallic objects. Disposal way of metallic objects were used to various resin and grease which will must be well selected in the nature of relics. The contents of this report are summed up as follows ; The resins of Incralac, Ruscoat, wash primer, Amerlock-400 wrer coated on the slice of ironware (5% saltspray test on the view of nature & Adherence). After the coating, add increasing speed to a corrosion rate, and then the adherence of resins were tested. In this study corrosion test, 0.10-0.25% Amerlock-400 jis proved to be a rare one of corrosion rate and 1.0-2.5% Wash primer is found to be a plenty one of corrosion area.