• 한국환경과학회지
• /
• 제16권12호
• /
• pp.1355-1367
• /
• 2007

This study summarizes the relations among $PM_{2.5}$ concentration, water-soluble ions concentration, metallic element Components characteristics and SPSS in negative ion and metallic element of $PM_{2.5}$ particle in Miryang.(By the urban area, the industrial complex area and the suburban area according to the season) $PM_{2.5}$ concentration of total 72 samples collected from 3 sites turned out to range from 3.47 to 34.7 ${\mu}g/m^3$, and the average concentration was the suburban area-the kin nup(16.00 ${\mu}g/m^3$) > the urban area-the roof of the old Miryang university(10.32 ${\mu}g/m^3$) > the industrial complex-Sapo industrial complex(10.29 ${\mu}g/m^3$). In particular, the suburban area had $PM_{2.5}$ concentration 1.5 times those of urban area, industrial complex. It was thought although the site was suburban and farm-side without pollutants around, it had a higher concentration value influenced by external factors including the brickyard, small-scale incinerator, driving range construction, construction on the Daegu-Busan express and the widening of the four-lane road between Miryang-Anyang nearby. As for water-soluble ions among $PM_{2.5}$ particle collected in Miryang area, $SO4_{2^-}$ accounted for 60% and $NO_{3^-}$, was 30% in spring and summer. And $NO_{3^-}$ accounted for 50% and $SO4_{2^-}$ was 35% in fall and winter. The AI value of metallic Components among $PM_{2.5}$ particle collected in Miryang area had a high value influenced by the apartment complex construction and the extension work of road. The industrial complex area had Zn concentration 3 times, and Fe concentration 2 times those of urban area and suburb area. When it comes to the relation with metallic elements in urban area, the highest coefficient of correlation was between Cr-Fe with 0.85, and Pb-Cd turned out in the reverse correlation. Among metallic elements, the coefficients of correlation between Zn and Cr, Mn, Fe, NI were high in industrial complex area. The highest coefficient of correlation was between Mn-Zn with 0.88, meanwhile Ni and Cu, Cd turned out in the reverse correlation in the suburb area. These coefficients of correlation are attributed to the difference in pollutant sources, rather than difference in pollutant and non-pollutant.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2008년도 춘계학술대회 논문집
• /
• pp.466-468
• /
• 2008

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2008년도 춘계학술대회 논문집
• /
• pp.137-138
• /
• 2008

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2006년도 추계학술대회 논문집
• /
• pp.259-260
• /
• 2006

• 해양환경안전학회지
• /
• 제26권4호
• /
• pp.392-402
• /
• 2020

살포식 패류양식해역인 진주만의 퇴적물 중 유기물과 금속의 분포 특성 및 오염상태를 파악하기 위하여 2015년 8월에 산휘발성황화물(AVS), 강열감량(IL), 총유기탄소(TOC), 총질소(TN), 금속원소(As, Cd, Cr, Cu, Fe, Hg, Mn, Pb, Zn)를 조사하였다. 퇴적물 중 유기물과 금속원소의 농도는 패류양식장이 밀집해 있는 만의 남쪽 해역에서 높고, 우리나라 남해안의 다른 해역과 비슷하거나 낮았다. C/N비(5.7~8.0)를 기초로, 진주만 퇴적물의 유기물은 해역 자체에서 생성된 해양기원성인 것으로 파악되었다. 퇴적물 오염평가 결과, 유기물(AVS, TOC)과 금속원소(As, Cd, Cr, Cu, Hg, Pb, Zn) 농도는 우리나라의 퇴적물 기준보다도 상당히 낮았다. 또한, 금속원소 전체 농도를 고려한 오염부하량지수(PLI)와 생태계위해도지수(ERI) 결과는 패류 양식장이 밀집해 있는 남쪽 해역에서 높은 오염도를 보이지만, 대부분의 해역에서 저서생물에 약간 부정적인 생태 영향을 줄 수 있는 오염 상태였다. 그러므로, 진주만 퇴적물은 현재 유기물에 대해서는 오염되지 않았고, 금속원소에 있어서는 약간 오염된 상태인 것으로 파악되었다.

• 한국지구과학회지
• /
• 제31권3호
• /
• pp.234-245
• /
• 2010

본 연구에서는 2006년부터 2008년까지 3년간 봄철에 $PM_{10}$과 $PM_{2.5}$를 채취하여 질량농도와 금속원소의 화학적 특성, 기상인자와의 관계 분석, 황사 및 비황사시의 미세먼지 특성 그리고 이동경로에 따른 농도의 특성을 고찰하였다. 연구기간동안의 $PM_{10}$, $PM_{2.5}$, $PM_{10-2.5}$평균농도는 각각 $126.2{\pm}89.8$, $85.5{\pm}41.6$, $40.7{\pm}54.9{\mu}g/m^3$이었으며 $PM_{2.5}/PM_{10}$ 및 $PM_{10-2.5}/PM_{2.5}$ 비는 각각 0.70, 0.48이었다. 우리나라의 북서쪽인 북경을 포함한 지역과 서쪽인 상해를 포함한 지역에서 공기덩어리가 이류 할 때 가장 높은 미세먼지농도를 나타내었다.

• Corrosion Science and Technology
• /
• 제9권6호
• /
• pp.259-264
• /
• 2010

In continuous hot dip galvanizing process, oxide formation on steel surface has an influence on Zn wetting. High strength automotive steel contains high amount of Si and Mn, where Si-Mn composite oxides such as $Mn_2SiO_4$ or $MnSiO_3$ covers the surface after annealing. Zn wetting depends on how the aluminothermia reaction can reduce the Mn-Si composite oxides and then form inhibition layer such as $Fe_2Al_5$ on the steel surface. The outward diffusion of metallic ions such as $Mn^{2+}$, $Si^{2+}$ in the steel matrix is very important factor for the formation of the surface oxides on the steel surface. The surface state and grain boundaries provide an important role for the diffusion and the surface oxide reactions. Some elements such as P, Sb, and B have a strong affinity for the interface precipitation, and it influence the diffusivity of metallic ions on grain boundaries. B oxide forms very rapildly on the steel surface during the annealing, and this promote complex oxides with $SiO_2$ or MnO. P has inter-reacted with other elements on the grain boundaries and influence the diffusion through on them. Small addition of Sb could suppress the decarburization from steel surface and retards the formation of internal and external selective oxides on the steel surface. Interface control by the trace elements such as Sb could be available to improve the Zn wettability during the hot dip galvanizing.

• 대한기계학회논문집
• /
• 제17권9호
• /
• pp.2286-2293
• /
• 1993

The study presents the development of a cost-effective CAD/CAM system for metal moulds by use of personal computer. In the personal CAD/CAM system named DKSYS, metal moulds are defined by the operations of basic elements such as prism, pyramid and sphere, plane, rotational body, and surface elements including curved surface. The internal expression of shape elements in the computer is based on the wire model, which is a set of cross-sectional curves of the shape elements. With the addition of OMS system to CAD/CAM system the optimum cutting condition can be selected automatically. After programming NC information with the form definition and the optimum cutting condition, the metallic mould can be formed by transferring cutting information to CNC machine through DNC system. Using a computer for the above process, it is possible to increase the productivity and reduce the cost.

• Tribology and Lubricants
• /
• 제12권3호
• /
• pp.39-47
• /
• 1996

The magnetic fibrous polymeric oil filter elements for industrial lub-systems were obtained by pneumoextrusion processing prepared from thermoplastic pqlymer (polyamide) containing a magnetic particulate filler (Ba ferrite), and treated subsequently in a magnetic fields. Using the standard laboratory oil filtration test rig, metallic particle quantifier and image analyser system, the dependence of filtration charateristics of the magnetic filter media on the parameters of porosity and magnetic properties was investigated. The pressure drops and efficiencies of lubricating filter elements were measured on the packing density and magnetised filler content of filter element. Also, the industrial lub-systems such as lubricant filters for gear test rig and electric discharge processing machine were used for testing the flitrational characteristics of tl, c magnetised filter elements. The magnetic fibrous polymeric filter material was shown to possess a highly filtration efficiency in filtering the fine ferrous particles with increasing the magnetic force of filter element. Therefore, it is expected that the magnetic fibrous polymeric filter material should be used for effective oil filrers on the industrial lub-systems.

• 자원환경지질
• /
• 제54권3호
• /
• pp.331-352
• /
• 2021

The relationship of both heavy metals and major elements in soil, plants, and groundwater was studied in a hyper-arid area and depends completely on the groundwater to cover its all needs. The study reviles that 27.3% of the studied groundwater was strongly acidic and has very low pH values (