• Journal of Adhesion and Interface
• /
• v.4 no.2
• /
• pp.1-9
• /
• 2003

Epoxy-amine liquid prepolymers are extensively applied onto metallic substrates and cured to obtain painted materials or bonded joint structures. Overall performances of such systems depend on the created interphase between the organic layer and the substrate. When epoxy-amine liquid mixtures are applied onto more or less hydrated metallic oxide layer, concomitant amine chemical sorption and hydroxide dissolution appear lending to the chelate formation. As soon as the chelate concentration is higher than the solubility product, these species crystallize as sharp needles. Moreover, intrinsic and thermal residual stresses are developed within painted or bonded systems. When residual stresses are higher than the organic layer/substrate adhesion, buckling, blistering, debonding may occur leading to a catastrophic drop of system performances. Practical adhesion can be evaluated with either ultimate parameters (Fmax or Dmax) or the critical strain energy release rate, using the three point flexure test (ISO 14679-1997). We observe that, for the same system, the ultimate load decreases while residual stresses increase when the liquid/solid time increases. Ultimate loads and residual stresses depend on the metallic surface treatment. For these systems, the critical strain energy release rate which takes into account the residual stress profile and the Young's modulus gradient remains quite constant whatever the metallic surface treatment was. These variations will be discussed and correlate to the formation mechanisms of the interphase.

• Journal of the Korean Chemical Society
• /
• v.12 no.3
• /
• pp.114-120
• /
• 1968

Fe-EDTA complex, which is easily formed when Fe salt and EDTA.2Na are mixed in the aqueous medium, is found to be a very effective catalyst in the dehydropolycondensation of aminophenols. In the dehydropolycondensation of aminophenols, the catalyst, Fe(Ⅲ)-EDTA complex (higher oxidation state) is reduced to less stable Fe(Ⅱ)-EDTA complex (lower oxidation state), and the latter is easily oxidized by air to the original higher oxidation state complex, therefore the catalytic action of Fe-EDTA complex is found to be recycled effectively. Under the catalytic action of the above mentioned complex, p-aminophenol is polymerized in the aqueous medium to form the oligomers of p-aminophenol, which the degree of polymerization to be 5 or more. The oligomers formed contain partly quinone nucleus as well as amino and hydroxyl groups. In this study, the effects of the solvents and characteristics of the oligomers are discussed. These types of polymerizations catalyzed by the metallic chelate compounds are considered to be very closely related to the reactions in the living matters.

• Journal of the Korean Chemical Society
• /
• v.12 no.3
• /
• pp.121-127
• /
• 1968

In the oligomerization of p-aminophenol under the catalytic action of the metallic complexes, the effects of the ligands are studied. When the initial velocity of $O_2$ uptake at pH 8 using Fe(Ⅲ) as the central metal and N-hydroxylethylethylenediaminetriacetic acid (HEDTA), ethylenediaminetetraacetic acid (EDTA), diethylenetriaminepentaacetic acid (DTPA), 1,2-cyclohexanediaminetetraacetic acid(CyDTA) as the ligands respectively are compared, the velocities are as the following order: HEDTA > EDTA > DTPA > CyDTA. Further when the effect of the ligands, nitrilotriacetic acid (NTA), HEDTA, EDTA, and DTPA, on the yields of oligomers are compared, the result shows as the following order: NTA > HEDTA > EDTA > DTPA. These are nearly reverse order of the stability constants of the complexes. In order to determine the composition of the mixed complexes at the initial step, the method of continuous variation is used, and it is found that the composition ratio of Fe-EDTA complex to monomer in the mixed complexes is one at pH 5-8 range. It is also found that at pH 9 or in the more alkaline range, side reactions occur to form water soluble dimer of quinone type and the catalytic action of the metallic complex markedly decreases on account of the hydrolysis of the central metal by the $OH^-$ ion.

• Journal of the Korean Chemical Society
• /
• v.12 no.3
• /
• pp.128-137
• /
• 1968

In the oligomerization of p-aminophenol by the catalytic action of Fe-EDTA complex in the aqueous medium, the mixed complex intermediate, Fe-EDTA-M type, is considered to be formed, from which active radicals of the monomer are produced. In this system, polymerization is presumed to proceed as follows: Free radical formation ${\to}$ Coupling ${\to}$ Activation ${\to}$ Coupling, and so on. In this study, the form of the monomer and coordination state in the mixed complex, the catalytic action of Fe-EDTA the complex, the reaction mechanism, and the structure of the oligomers are discussed.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.1
• /
• pp.19-28
• /
• 2021

Corrosion is the degradation of metals by reaction with the environment. It is difficult to completely remove. Corrosion proceeds rapidly after the protective barrier is destroyed, and several reactions occur that alter the composition and properties of the metal surface and local environments, such as diffusion of metal cations into the matrix, the formation of oxides, and local pH changes. The study of corrosion of steel and iron is of theoretical and practical interest and is receiving considerable attention. Acid solutions, which are widely used in industrial pickling, acid descaling, cleaning and acidification of oil wells, require the use of corrosion inhibitors to suppress corrosion attacks on metallic materials. Physical removal of rust requires expensive special equipment, and chemical removal of it can cause corrosion or shorten the life of the metal. In this study, an eco-friendly rust cleaner was developed using cosmetics and food materials by applying the concept of perm reducing agent and chelate, and applied to remove rust from industrial and hot water pipes and various industrial devices. As a result, it was found that rust cleaners remove rust more effectively and safely compared to conventional treatment methods. At the same time, the rust removal efficiency was 1.75 to 2.5 times better for industrial piping and 1.56 to 2.2 times better for boiler hot water than conventional methods.

• The Korean Journal of Nuclear Medicine
• /
• v.18 no.2
• /
• pp.77-85
• /
• 1984

Monoclonal antibodies have become widely investigated in the Nuclear Oncology, especially in the radioimmunosassay of tumor markers and in vivo radioimmunoimaging of cancer. However, there are numerous factors as to whether radioimmunoimaging will ultimately successful. For imaging of tumors, metallic radionuclides such as In-111, Ga-67, Tc-99m have favorable nuclear properties than widely used I-131. These radioistopes have characteristics of the useful radiation for imaging, convenient short half-lives and the simple and rapid radiolabeling of monoclonal antibodies by using bifunctional chelaing agents. The obtained chelate-tagged antibodies are quite stable both in vitro and in vivo, without interfering antibody activities and animal experiments provided a good basis for its clinical applicability for the radioimmunoimaging of cancer. Much attention has also been given to the possibility, only beginning to be exploited, of the specific treatment of malignant neoplasms with these agents. Although specific antibody has not been developed that is uniquely specific for cancer alone and there are still many questions to be answered and problems to be overcome before radioimmunoimaging can be successfully used in ptients with cancer, these methods can be applied to the coupling of monoclonal antibodies with anti-neoplastic drugs or radionuclides suitable for internal radiation therapy of cancer.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.1094-1103
• /
• 2017

The purpose of this study was to measure the bioactivity and antioxidant activity of seed from Gardenia jasminoides Ellis fructus (GJE). We determined tannin content ($1.517{\pm}0.003mg\;CE/g$, mg of catechin equivalents). The extraction yields of the GJE seed solvent were distilled water (DW) 36.61%, 70% methanol 30.10% and ethyl acetate (EA) 20.40%. The antioxidant activities of the extracts were significantly increased (0.2, 0.4, 0.6 mg/mL). Flavonoid contents (mg QE/g, mg of quercetin equivalents) were observed in the order of 70% methanol (0.799), DW (0.565) and EA (0.117). Antioxidant activities (DPPH, OH, ferrous ion-chelating capacity) were similar to the flavonoid content of each solvent. But ABTS scavenging activity and SOD like ability of DW extract were higher than 70% methanol extract. Comparing the yield and the antioxidant activity of each solvent of GJE seed, it seems to be preferable to use DW and 70% methanol solvent for extraction. As a result of this experiment, it has high antioxidant activity and physiological activity, which is expected to be highly valuable as a functional food and a natural antioxidant.

• Korean Journal of Agricultural Science
• /
• v.32 no.1
• /
• pp.71-80
• /
• 2005

Phytic acid chelates excellently the metallic ions and the positive ions, especially has high affinity with $Fe^{2+}$ and $Ca^{2+}$. Merits of phytic acid can be taked in easily, edibile and harmless to body, so it was investigated that phytic acid can be substituted for EDTA in this study. 1. The Intensificative effect of chelating agent and disinfective osmotic shock of Vibrio vulnificus The number of initial existent fungi measured $1.7{\times}10^6$. The percentages of the survival fungi against the osmotic shock by distillated water were calculated at 1 minute, 3 minute and 5 minute after inoculation. The percentages of the survival fungi in $Mg^{2+}$ were 92.5%, 91.8% and 79.8% at each time, the average percentage was 88%. Also the sudden extinction was observed around 1 minute after inoculation and the survival fungi were not observed from 3 through 5 minute in spite of repeated experimentation. 2. Influence of Vibrio vulnificus on the survival of the mice. The first mouse started to die in 180 minute after inoculation in case that the inoculating number was $2.3{\times}10^7cfu/ml$. All died within 4.5 hour. The average of survival time was 226 minute. The first mouse started to die in 228 minute after inoculation in case that the inoculating number was $0.8{\times}10^6cfu/ml$. All died within 5 hour. The average of survival time was 300 minute and the survival time was 1.3 times high. The tendencies of death in two cases were similar, but the fatal rate were largely dependent on inoculating number.