• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3172-3174
• /
• 2000

It is necessary to collect and analyze the corrosion date to control the underground metallic structures systematically. It can be possible to predict the remaining life of underground metallic structures. In this paper we describe the life prediction technology of cathodic protection systems and underground metallic structures without a cathodic protection system.

• Earthquakes and Structures
• /
• v.23 no.5
• /
• pp.419-430
• /
• 2022

The metallic energy dissipation device (EDD) has been widely accepted as a useful tool for passive control of buildings against earthquakes. The distribution of metallic EDDs in a multi-story building may have significant influence on its seismic performance, which can be greatly enhanced if the distribution scheme is properly designed. This paper addresses the optimal distribution problem in the aim of achieving a desired level of performance using the minimum number of metallic EDDs. Five local search heuristic algorithms are proposed to solve the problem. Four base structures are presented as numerical examples to verify the proposed algorithms. It is indicated that the performance of different algorithms may vary when applied in different situations. Based on the results of the numerical verification, the recommended guidelines are finally proposed for choosing the appropriate algorithm in different occasions.

• Journal of Korea Foundry Society
• /
• v.15 no.2
• /
• pp.164-174
• /
• 1995

New metallic powder making processes, named "Centrifugal Emulsification Process(CEP)" and "Mixer and Settler(MS)" have been developed to synthesize rapid solidified metallic powders. Through CEP and MS processings, the high temperature metals as well as the low temperature alloys are manufactured. Also, the effects of rapid solidification on the undercooling, solidification rate and crystallization behaviors can be evaluated effectively through the processes. The standard deviations of the synthesized typical Pb-Sn eutectic powders are 1.63 and 1.51 for CEP and MS respectively, and the average size of the MS powders was $18{\mu}m$. The possibility of the customized not only size and shape control but microstructure control was also shown. Both of the new methods can be applied to continuous powder making processes.

• Journal of Magnetics
• /
• v.20 no.3
• /
• pp.201-206
• /
• 2015

Using the Vienna ab initio simulation package (VASP) incorporating both semiempirical and nonlocal van der Waals interaction, the structural, adsorption, and magnetic properties of Ni/BN/Co systems were investigated. We proposed that the relative spin direction of Ni and Co magnets can be easily tuned, because the total energy difference between ferromagnetic (FM) and antiferromagnetic (AFM) states is small. Despite this feature, very interestingly, both Ni and Co layers manifest half-metallic state, whereas the spacer BN layer becomes weak metal for one monolayer (ML) thickness and an insulating barrier for two ML thicknesses. The half-metallic behavior of the magnetic layers seems very robust, because it is independent of the magnetic coupling between Ni and Co. This finding indicates that the Ni/BN/Co system can be used as a potential candidate for tunneling magnetoresistance system.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.301-304
• /
• 2005

Metallic sandwich plates are ultra-light materials with not only high strength and stiffness but also multifunctional. Inner dimpled shell structure can be fabricated by piecewise sectional forming process, and then bonded with same material face sheets by resistance welding. Tests have shown that sandwich plates with dimpled shell structure subject to bending have more collapse load, energy absorption and deflection before collapse than other types of sandwich plates. Consequently, inner dimpled shell structure can improve formability of sandwich plates for bending.

• Journal of Korean Association for Spatial Structures
• /
• v.15 no.1
• /
• pp.85-94
• /
• 2015

SAFE damper is a hybrid damper which is comprised of a friction damper and a metallic damper. These two dampers combine to resist external energy in stages. Under minor earthquake loads, the friction damper operates alone. However, the friction damper and metallic damper dissipate the energy together when a severe earthquake occurs. In comparison with other methods for seismic retrofitting, the SAFE damper has many advantages. The SAFE damper doesn't cause damage to façade of the building, and the construction period can be reduced when retrofitting. This paper describes experiments evaluating the structural performance of the SAFE damper. From the results, it was found that the structural performance of a conventional RC bare frame can be significantly improved by the installation of the SAFE damper.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2013.12a
• /
• pp.32-32
• /
• 2013

Using the Vienna ab initio simulation package (VASP) incorporating van der Waals interaction, we have explored structural, adsorption, and magnetic properties of Ni(111)/BN/Co(111) systems. We have found that both Ni(111) and Co(111) layers shows half metallic state, while the spacer BN layer becomes weak metal for one monolayer (ML) thickness and an insulating barrier for two ML thickness. The half metallic states in both Ni(111) and Co(111) layers are robust because it is unchanged independently on the magnetic coupling of Ni(111) and Co(111). This finding suggests that the Ni(111)/BN/Co(111) systems can be utilized for perfect tunneling magnetoresistance system. Moreover, it can be applied for potential spin injecting into semiconductor in FM/semiconductor system due to the fact that the half metallic state in FM layers at the interface will be unchanged.

• ETRI Journal
• /
• v.30 no.4
• /
• pp.597-599
• /
• 2008

This letter presents the design of a small and low-profile RFID tag antenna in the UHF band that can be mounted on metallic objects. The designed tag antenna, which uses a ceramic material as a substrate, consists of a radiating patch and a microstrip line with two shorting pins for a proximity-coupled feeding structure. Using this structure, impedance matching can be simply obtained between the antenna and tag chip without a matching network. The fractional impedance bandwidth for $S_{11}$ <3 dB and radiation efficiency are about 1.4% and 56% at 911 MHz, respectively. The read range is approximately from 5 m to 6 m when the tag antenna is mounted on a metallic surface.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.18 no.3
• /
• pp.109-116
• /
• 2023

This paper presents a network-based automation system for the detection of metallic objects in food and livestock. A metal detector is a core equipment used for the inspection required by HACCP. Since the existing metal detectors are manufactured as a single-body equipment, it is difficult to take into account various user requirements for the system. In order to overcome the drawback, this study presents a network-based automation system for metal detector utilizing an industrial fieldbus and modular components. The proposed system can effectively consider the various customer requirements and control schemes. The proposed system can also achieve the improvement in speed and success rate of detecting metallic objects. The effectiveness of the proposed system is demonstrated through a various experiments.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.87.1-87.1
• /
• 2010

Metallic bipolar plate is the one of the promising candidate material for PEMFC because of mechanical strength, low gas permeability, electrical and thermal conductivity. However, the corrosion is the main obstacle of metallic bipolar plate, and many investigations, especially coating on base metal, have been carried out to avoid corrosion. Gold is considered as the one of the best coating material because of its corrosion resistance and electrical conductivity. In this study, gold coated metallic bipolar plate was developed and evaluated. Due to our coating process, gold can be well-adhere to the base material, and hydrophobic material on its gold surface was coated by dipping method for better water management. To verify coating reliability, a single fuel cell(50cm2) was evaluated, and its durability over 4000hrs was demonstrated.