• 대한가정학회지
• /
• 제44권1호
• /
• pp.101-113
• /
• 2006

The purpose of this study was to investigate and compare the characteristics of the motifs on cultural goods in In-Sa-Dong Street, Seoul, with those in Art Street, City Hall, Kwang-ju. For this study, 607 cultural goods were collected from the two cities: 265 in Seoul and 342 in Kwang-ju. Total cultural goods were classified by accessories, decoration pieces, stationery and ceramics and were studied by repetition patterns, motifs types, representative techniques, and representative types. The results were as follows. First, for repetition patterns of motifs, there were 219 simple repetition patterns in Seoul, and 289 in Kwang-ju, and 46 compound repetition patterns in Seoul, and 53 in Kwang-ju. The ratio of simple repetition pattern was higher than that of compound repetition pattern in both cities. Second, for motif types, floral, animal, letter, and graphic motifs were used far more frequently than any other motif types. Third, for representative techniques, embroidery was far more frequently used than any other representative techniques. Metallic crafts, chil-bo and paper techniques were also favored. Fourth, for representative types, realistic types were more common than abstract types.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.635-636
• /
• 2010

• 한국전자파학회논문지
• /
• 제13권7호
• /
• pp.667-678
• /
• 2002

본 논문에서는 구형 빔 패턴 형성을 위한 다층 이차원 원형 도체 배열을 갖는 새로운 방사 구조를 제안하였다. 새로운 방사 구조는 방사 원형 도파관 위에 유한하게 적층된 원형 도체 배열 소자들이 무한적, 주기적 평면 배열 구조를 갖는다. 이론적 해석은 rigid full-wave 해석 방법으로 배열 구조의 각 영역에서의 전자장에 대한 모드 전개식과 원형 도체상의 전류에 대한 모드 전개식에 바탕을 두고 상세히 수행되었으며, 함수의 직교성, 모드 정합 방법, 경계조건 그리고 Galerkin 방법을 사용하여 선형 대수 방정식 시스템을 유도하였다. 또한, Gauss 소거법을 사용하여 배열 특성 계산에 필요한 미지의 진폭 계수들을 얻었다. 제안된 알고리듬은 Ka대역에서 $\pm$20$^{\circ}$의 빔 폭을 갖는 구형 빔 패턴 형성을 위한 배열 설계에 사용되었으며, 일반적인 응용을 위해 파장으로 정규화된 최적화 설계 변수들을 제시하였다. 시뮬레이션 결과와 실험 결과들을 서로 비교하기 위해, 대칭적으로 19개의 방사 소자를 갖는 Ka 대역 실험 시제품을 제작하였다. 방사 원형 도파관 개구면 위에 적층된 원형 도체 배열 구조는 얇은 필름상에 이온-빔 증착 방법을 사용하여 구현되었다. 계산된 단위소자 패턴들과 시제품의 측정된 단위소자 패턴들은 빔 스캔 범위 내에서 거의 일치함을 보여주었으며, 사이드 로브 레벨과 그레이팅 로브 레벨에 대한 결과 분석도 이루어졌다 또한, 정 방향에서 다층 원형 도체 구조에 의해 생길 수 있는 blindness 현상에 대하여 언급하였다. 제작된 시제품의 입력 VSWR은 1.14 보다 작았으며, 29.0 GHz, 29.5 GHz 그리고 30 GHz에서 측정된 이득은 각각 10.2 dB, 10.0 dB 그리고 10.7 dB 였다. 실험 및 시뮬레이션 결과들은 제안된 다층 원형 도체 배열 구조가 효율적인 구형 빔 패턴을 형성할 수 있음을 보여 주었다.능성을 시도하였고, 그 결과는 다음과 같다. 1. Cholesterol을 제거한 cheese의 제조에서 최적조건은 균질압력 1200psi(70kg$cm^2$), 균질온도 $70^{\circ}$, $\beta$-cyclodextrin 첨가량 2%였으며, 이때 우유의 cholesterol의 제거율이 86.05%로 가장 높게 나타났다. 2. Cholesterol을 제거한 cheese들의 수율은 모두 12.53%(control 10.54%) 이상으로 균질 처리가 cheese의 수율을 18.88%이상 향상시키는 것으로 나타났다. 3. 유지방 함량 23.80%인 control 치즈의 cholesterol 함량은 81.47mg/100g이었고, 균질압력 1200psi(91kg/$cm^2$)에 $\beta$-cyclodextrin 2%를 첨가한 cheese에서는 cholesterol 함량이 20.15mg/100g으로 cholesterol 제거율이 75.27%로 가장 높게 나타났다. 4. Meltability는 균질압력 1200psi(91kg/$cm^2$)에 $\beta$-cyclodextrin 1과 2%로 처리한 치즈에서 2.25cm(control 3.34cm)로 가장 낮았으며, 균질압력이 증가할수록 meltability가 감소하여 치즈의 품질을 저하시켰다. 5. Control 치즈의 stretchability는 30cm 이상 늘어나 가장 양호한 수치인 5점을 나타낸 반면, cholesterol을 제거한 cheese에서는 5~10cm 사이를 나타내어 2점으로 stretchability가 저하된 것을 볼 수 있었다. 6. Oiling off는 균질압력 1200psi(91kg/$cm^2$)에 $\beta$-cyclodextrin 1과 2%로 처리한 치즈에서

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.22.3-22.3
• /
• 2008

We present the results of the investigations of high dispersion spectra of two stars. These are the eclipsing binary RR Lyn, and $\rho$ Pup - the prototype of the group of pulsating variables. The spectra were obtained at 1.8 m Bohyuunsan observatory telescope, and 8.2 m VLT. We found the chemical composition. The both components of RR Lyn are Am stars (metallic line stars), but the abundance patterns of the components are not similar - the iron abundance and the abundances of other elements are surely different. For few elements the differences exceeds 1 dex. We found the abundances of 56 chemical elements in the atmosphere of $\rho$ Pup. This is one of the best stellar abundance patterns. It permits to investigate the role of the charge-exchange reactions in stellar atmospheres. These reactions can produce the abundance anomalies in the atmospheres of B-F type stars. These reactions can be one of the sources of galactic cosmic rays, and the reason of the braked rotation of A-F type chemically peculiar stars.

• 자원환경지질
• /
• 제18권1호
• /
• pp.65-92
• /
• 1985

A total of 12 mineral commodities significant in domestic output, economy and/or strategy of the Republic of Korea are chosen to examine the structural changes in production and demand-supply of these minerals during the last two decades of her industrialization. These include iron and manganese ores as the raw materials for iron and steel making, copper, zinc and tungsten ores among other non-ferrous metallic minerals, limestone (cement), kaolin, talc, pyrophyllite and graphite among other non-metallic minerals, and anthracite coal as the only domestic source of fossil energy. These are reviewed historically in time-series based on the statistical data which are tabulated and graphed in terms of domestic output, export, import, apparent demand-supply, its increasing rate, and self-sufficiency rate of each commodity. The increasing rates of demand-supply (IRDS) of some more important commodities are compared with those of Gross Domestic Production (GDP) and Economic Growth Rate (EGR) to evaluate how the IRDS contributed to the GDP and EGR. The major results revealed are as follows: Among the 12 commodities, the domestic output of 8 commodities appeared to have grown with steady upward trends: they are ores of lead, zinc and tungsten, limestone (cement), kaolin, talc, pyrophyllite and anthracite coal. Two commodities, ores of iron and copper, continued with unchanging or slightly declining trends and varied fluctuations, in spite of their cardinal importance to the heavy industry and strategy of Korea. The remaining two, graphite and manganese ore, have gradualy declined in domestic output in which the former has still enough resource potential but the latter has not and virtually ceased its domestic output. Trade patterns for mineral commodities in the Republic of Korea during the last two decades have changed greatly, being marked by a shift from mineral-exporting to mineral importing, mainly because of increasing consumption of mineral raw materials for industrialization rather than beceuse of decreasing output of domestic mineral commodities in quantity. In terms of trade patterns, the 12 commodities concerned in this study can be classified into the following four groups. The 1st group - ores of lead and tungsten have only been exported without imports. The 2nd group - amorphous graphite, and pyrophyllite have mainly been exported but partly been imported. The 3rd group - kaolin, talc and crystalline graphite have equally been exported and imported, but quantity of imports have rapidly been increased with time. The 4th group - ores of iron, manganese and zinc have shifted from exports to imports during the industrialization, particularly owing to the initiation of iron and steel making by the Pohang Iron and Steel Company in the middle 1970' s and the new establishment of the Onsan Zinc Refinery in the late 1970' s. All of the 12 commodities under considerations were far above 100% in self-sufficiency rate before or in the early 1960' s. Recently, however, most of them have been declined to below 100% except for those of limestone (cement) and pyrophyllite. It is particularly serious to identify that the self-sufficiency rates of the three important metallic minerals, iron, copper and manganese ores in 1982 appeared to be 5.1%, 0.5%, and 0.01%, respectively. The average self-sufficiency rate of the total domestic minerals produced in 1982 was 14.4% (in value) for that year. Mining industry appeared to be extremely high in its intermediate demand rate whereas its intermediate input rate to be quite low indicating that mineral raw materials have been exerted strong forward linkage effects upon the other industries rather than backward linkage effects. In comparing the curves of increasing rates of demand-supply of several major minerals - iron ore, manganese ore, copper ore, limestone (cement), kaolin, and anthracite coal - with those of Gross Domestic Production and Economic Growth Rate drawn on every graph, it is clearly shown that the curves of increasing rates of demand-supply comprise around 6 to 7 periods of cycles which roughly harmonious with those of the curves of GDP and EGR, except for the curve of anthracite coal of which the configuration seems to have resulted from the (artificial) government's mineral policy rather than from economic free market mechanism. The harmonic feature of these curves well suggests that the increasing rates of demand-supply of major minerals have been significantly contributed to the GDP and EGR. In addition, the wider amplitudes of the iron, manganese and copper curves than those of the limestone (cement) and kaolin curves indicate that the contribution of the former, metallic commodities, has been greater than that of the latter, non-metallic commodities.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.657-662
• /
• 2005

In this study, the deposition of micrometer-scale metallic interconnects on LCD glass for the repair of open-circuit type defects is investigated. Although there had been a few studies Since 1980 s for the deposition of metallic interconnects by laser-induced chemical vapor deposition, those studies mostly used continuous wave lasers. In this work, a third harmonic Nd:YLF laser (351nm) of high repetition rates, up to 10 KHz, was used as the illumination source and $W(CO)_6$ was selected as the precursor. General characteristics of the metal deposit (tungsten) such as height, width, morphology as well as electrical properties were examined for various process conditions. Height of the deposited tungsten lines ranged from 35 to 500 nm depending on laser power and scan speed while the width was controlled between $3\~50{\mu}$ using a slit placed in the beam path. The resistivity of the deposited tungsten lines was measured to be below 1 $O\cdot{\mu}m$, which is an acceptable value according to the manufacturing standard. The tungsten lines produced at high scan speed had good surface morphology with little particles around the patterns. Experimental results demonstrated that it is likely that the deposit forms through a hybrid process, namely through the combination of photolytic and pyrolytic mechanisms.

• 한국전자파학회논문지
• /
• 제14권10호
• /
• pp.985-995
• /
• 2003

본 논문에서는 $\pm$20$^{\circ}$의 구형 빔 패턴 형성을 위한 삼차원 다층 원형 도체 배열 구조의 최적화 설계 변수들에 대하여 연구하였다. 원형 도파관 여기에 의한 다층 원형 도체 배열 구조의 각 방사 소자는 입력 원형 도파관, 임피이던스 정합용 원형 도파관, 방사 원형 도파관 그리고 그 위에 적층된 유한개의 원형 도체 배열층들로 구성되며, 각 방사 소자들은 원추형 빔 스캐닝에 적합한 정육각형 격자 배열 구조를 이룬다. 본 논문에서는 다층 원형 도체 배열 구조에 대한 해석 알고리듬을 제시하고, 이것을 프로그램 코드화하여 최적화 설계 변수 추출을 위한 다양한 설계 변수 변화에 대한 시뮬레이션을 수행하였다. 또한, 다층 원형 도체 배열 구조의 구형 빔 패턴 및 반사 계수에 대한 대역폭 특성을 살펴 보았으며, 그 결과 다층 원형 도체 배열 구조는 최소한 5.6 %의 주파수 대역폭내에서 $\pm$20$^{\circ}$의 양호한 구형 빔 패턴을 형성함을 알 수 있었다.

• 한국재료학회지
• /
• 제20권10호
• /
• pp.550-554
• /
• 2010

This work presents a fabrication procedure to make large-area, size-tunable, periodically different shape metal arrays using nanosphere lithography (NSL) combined with ashing and annealing. A polystyrene (PS, 580 ${\mu}m$) monolayer, which was used as a mask, was obtained with a mixed solution of PS in methanol by multi-step spin coating. The mask morphology was changed by oxygen RIE (Reactive Ion Etching) ashing and temperature processing by microwave heating. The Au or Pt deposition resulted in size tunable nano patterns with different morphologies such as hole and dots. These processes allow outstanding control of the size and morphology of the particles. Various sizes of hole patterns were obtained by reducing the size of the PS sphere through the ashing process, and by increasing the size of the PS sphere through annealing treatment, which resulted in tcontrolling the size of the metallic nanoparticles from 30 nm to 230 nm.

• 한국전기전자재료학회논문지
• /
• 제29권6호
• /
• pp.327-331
• /
• 2016

Resistive random access memory (ReRAM) of metallic conduction channel mechanism is based on the electrochemical control of metal in solid electrolyte thin film. Amorphous chalcogenide materials have the solid electrolyte characteristic and optical reactivity at the same time. The optical reactivity has been used to improve the memory switching characteristics of the amorphous $As_2Se_3$-based ReRAM. This study focuses on the formation of holographic lattices patterns in the amorphous $As_2Se_3$ thin film for straight conductive channel. The optical parameters of amorphous $As_2Se_3$ thin film which is a refractive index and extinction coefficient was taken by n&k thin film analyzer. He-Cd laser (wavelength: 325 nm) was selected based on these basic optical parameters. The straighten conduction channel was formed by holographic lithography method using He-Cd laser.$ Ag^+$ ions that photo-diffused periodically by holographic lithography method will be the role of straight channel patterns. The fabricated ReRAM operated more less voltage and indicated better reliability.

• Journal of electromagnetic engineering and science
• /
• 제12권1호
• /
• pp.26-31
• /
• 2012

We have proposed a metamaterial lens that enables sub-wavelength focusing, which is shorter than an operating wavelength. Our lens is a two dimensional array of a unit cell consisting of a metallic dual-plate printed on a dielectric substrate. The unique dual-plate structure provides negativeness both in permittivity and permeability, with no help from conventional additional structures, which are normally printed on the opposite of metallic patterns. Therefore, we can focus a source (or an image) in a tiny distance shorter than the free space wavelength (${\lambda}$) at the frequencies of interest. Furthermore, since the proposed geometry does not need separate supplementary structures to acquire negative permittivity or permeability, our lens is much simpler than conventional metamaterial lenses, which is a strong point in practical applications. We have validated sub-wavelength focusing ability in a 6 GHz frequency band through an experiment of near field scanning, which provided the width of about 0.19 ${\lambda}$ at a half maximum of a peak value of an measured image. The width of the focused image through the lens is more than 4 times shorter than that without the lens, which confirms the validity of our design approach.