• Advances in pediatric surgery
• /
• 제13권2호
• /
• pp.112-118
• /
• 2007

Ingested foreign bodies are common occurrences in the pediatric population. From October 2002 to April 2006, eight patients (6 male, mean age: $30.9{\pm}14.4$ months, range: 7~45 months) who had ingested metallic foreign bodies, such as bar magnets, coin-type magnets, screws, metal beads, and disk batteries, were selected for foreign body removal using a magnetic device under floroscopic control. A 1-cm-long cylindrical magnet (6 mm in diameter) was placed at the end of a 150-cm-long plastic tube from an IV set. The magnet was passed through the mouth into the stomach. Under fluoroscopic control, the magnet was maneuvered so that it attached to the metallic foreign bodies. The forgeign body was then easily removed by retracting the magnet with the metallic object attached. This procedure was successful in six patients of 8 patients. This procedure is a minimally-invasive and may avoid the use of anesthesics, endoscopy or surgery.

• 제어로봇시스템학회논문지
• /
• 제20권2호
• /
• pp.120-125
• /
• 2014

Conventional handheld metal detectors use a single induction coil to detect the metallic parts of explosive objects, and the detector generates an acoustic signal from its magnetic response to a metallic object so that an operator can confirm the existence of mines. Though metal detectors have very useful detection mechanisms to find mines, it is easy to cause a high false alarm ratio due to the detection of non-explosive metallic items such as cans, nails and other pieces of metal, etc. Also, because of the physical characteristic of a metal detector it is hard to detect non-metallic objects such as mines made of wood or plastic. Furthermore, the operator must move it to the left and right slowly and repeatedly to attain enough sensor signals to confirm the existence of mines using only a monotonous acoustic signal. To resolve the disadvantages of handheld detectors, many new approaches have been attempted, such as an arrayed detector and a visualization algorithm based on metal/non-metal sensor. In this paper, we introduce a visualization algorithm with a metal/non-metal complex sensor, an arrayed metal/non-metal sensor and the their testing and evaluation.

• 한국정밀공학회지
• /
• 제20권4호
• /
• pp.165-173
• /
• 2003

As the cycling time of new products have become more and more short in recent years, the demand for lowering the cost and reducing the production time becomes stronger. In order for the demand, the rapid prototyping and rapid tooling technology have been used. It has been widely known that RP technology has advantages with fabricating 3-D object having a complicated geometric shape. RP products, however, have a limitation with applying to the real die and mold because soft materials such as resin, paper and wax has been mostly used in RP technology. So in this paper, the RP products have been copied to semi-metallic soft tools using the mixture of metal fillers and epoxy resin. In order to evaluate the effect of the fillers on the characteristics of semi-metallic soft tools, three fillers are used including commercial aluminum powder, cast iron powder recycled by machining chips, and aluminum short fiber made by self-excited vibration technique. Besides, in the case of aluminum powder, the change of characteristics of semi-metallic soft tools is also tested according to the volume fraction of the powder.

• 보존과학연구
• /
• 통권25호
• /
• pp.133-150
• /
• 2004

Once the object has been excavated at underwater condition, it should be subjected to condition that may cause its deterioration. Therefore, it is important that the object immediately keeps stable environment. It means that the object was excavated at underwater and it exposed the deterioration condition, as soon as possible it was not dried on surface, especially metallic and organic material. Iron objects is particularly notorious for rapid disintegration that it kept wet or stored in a stable environment. Ceramics, glass and stone were handled carefully that it prevented physical damage by mishandling. Organic materials of wood, leather, rope, bone must not be allowed to dry out because the creaking, shrinking and warping are well known disintegration. Therefore objects is basis of keeping stable condition in on-site and then it will have to pass through a detailed conservation process in the laboratory.

• 한국생산제조학회지
• /
• 제9권3호
• /
• pp.69-75
• /
• 2000

The object of the research is to estimate for pearlite structure of quenched carbon steels. The effects of temperature on physical properties metallic structures and the latent heat by phase transformation were considered. In this study a set of constitutive equations relevant to the analysis of thermo-elasto plastic materials with pearlite phase transformation during quenching process way presented on the basis of continuum thermo-dynamics. The iso-thermal transformation curve of the SM50C was formlated by cubic spline curve. The formulated equations of evolution in pearlite transformation was used for structure analysis. The volume fraction of pearlite was obtained from the results of calculated metallic structure by Finite element equation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.656-661
• /
• 1997

Ultrasonic cleaning at high frequency near 1MHz, called megasonic cleaning, is commonly used to remove particles less than 1.mu.m by generating accelerations on them. Ultrasonic waves generated from piezoelectric transducers are transmitted through a non-metallic inner container which is used to isolate a cleaning object from metallic ions. The transmission characteristics of a double-structured megasonic cleaner on the variations of parameters such as the thickness and oblique angle of a inner container, chemical ratio of a cleaning agent and temperature and transmittivity are investigated. The results are used to determine an optimum cleaning condition.

• 천문학회보
• /
• 제39권2호
• /
• pp.80.2-80.2
• /
• 2014

We present the results of high resolution (R>35,000) optical spectroscopic monitoring observations of a new FU Orionis-like young stellar object, HBC 722. We observed HBC 722 with the Bohyunsan Optical Echelle Spectrograph (BOES) and Hobby-Eberly Telescope (HET) since November 26, 2010. HBC 722 is the FU Orionis-like object best characterized for the pre-outburst phase, and it provides the first opportunity to profile the burst phase of accretion across all wavelengths. We detected a number of lines such as $H{\alpha}$, $H{\beta}$, Fe II ${\lambda}$ 5018, Mg I ${\lambda}$ 5183, Na I D doublets, and metallic photospheric lines. In this work, we focus on the time variations of those spectral lines to understand the accretion process of HBC 722.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 SMICS 2004 International Symposium on Maritime and Communication Sciences
• /
• pp.74-76
• /
• 2004

It is the new promising method of obtaining the information about the state of a surface of a solid body, thin and multilayer structures. An idea of the method consists in reading and analyzing the relations U(t), dU/dt(t), dU/dt(U) on an electrical cell when anodizing an investigated object. By these relation it is possible to control the presence of impurities in the metal on the path of the anodization front, a structure and characteristics of the object being oxidized as well as of an oxide which is being formed during anodizing, the change in composition of the oxide layer, the thickness and composition of metallic and dielectric layers being a part of the layers boundaries.

• 한국ITS학회 논문지
• /
• 제13권1호
• /
• pp.46-52
• /
• 2014

본 논문에서는 금속 환경에서 사용이 가능한 RFID 국제 규격인 910MHz 대역에서 최상의 성능을 갖는 미앤더 형태의 마이크로스트립 패치 안테나를 설계하였다. 안테나에 부착되는 상용 태그 칩과 정합을 위해 사각 형태의 급전부를 본체에 연결하였으며, 사각 형태의 급전부를 본체 안에 위치하였고, 안테나의 복수부인 본체를 효과적으로 축소하기 위하여 패치의 소자를 증가시켜 다중의 미앤더 형태로 설계하였다. 제안된 안테나는 Case 1, Case 2, Case 3로 각각 3 종류의 안테나를 제작하였으며, 안테나의 크기와 접은 횟수에 따른 대역폭, 효율, 인식 거리 등의 특성을 비교 분석하였다. 측정결과 Case 3 안테나의 성능이 가장 좋은 것으로 나타났다. 또한 안테나의 크기와 미앤더 형태로 접은 횟수에 따른 효율 및 이득 특성 변화가 안테나의 인식 거리에 큰 영향을 미치는 것을 확인하였다.

• 대한소화기학회지
• /
• 제72권6호
• /
• pp.313-317
• /
• 2018

During laparoscopic cholecystectomy, a surgical clip is used to control the cystic duct and cystic artery. In the past, metallic clips were usually used, but over recent years, interest in the use of Hem-o-lok clips has increased. Surgical clip migration into the common bile duct (CBD) after laparoscopic cholecystectomy has rarely been reported and the majority of reported cases involved metallic clips. In this report, we describe the case of a 53-year-old woman who presented with abdominal pain caused by migration of a Hem-o-lok clip into the CBD. The patient had undergone laparoscopic cholecystectomy 10 months previously. Abdominal CT revealed an indistinct, minute, radiation-impermeable object in the distal CBD. The object was successfully removed by sphincterotomy via ERCP using a stone basket and was identified as a Hem-o-lok clip.