• Progress in Superconductivity
• /
• v.6 no.1
• /
• pp.74-78
• /
• 2004

YBCO coated conductor is one of the most promising materials as a new generations wire especially for practical power applications. In this work, $YBa_2$$Cu_3$$O_{7}$ -$\delta$/(YBCO) coated conductors (CC) were deposited by pulsed laser deposition (PLD) from buffer layers to superconducting layer on hi-axially textured metal tape. The oxide multilayer buffered substrate of architectures of $CeO_2$/$YSZ/Y_2$$O_3$ was fabricated by PLD at steady status. Then YBCO layer was deposited on RABiTS substrate by stationary and reel-to-reel (R2R) continuous process and we compared with deposition conditions of both processes. The degree of texture of each layer was investigated using X-ray diffraction including $\theta$-2$\theta$ scans, $\omega$-scans and $\Phi$-scans analysis. Their surface morphology was observed by scanning electron microscopy (SEM). The FWHM of the X-ray $\Phi$-scans and $\Phi$-scans indicated that YBCO and buffer layers closely replicate the in-plane and out-of-plane texture of metal tape. Critical current (Ic) at 77 K, self-field of 75.8 A/cm-width, critical temperature (Tc) of 85 K, and critical current density (Ic) of 3.7 MA/$\textrm{cm}^2$ were measured from coated conductor deposited by stationary process. And coated conductor deposited by R2R continuous process had Ic of 57.5 A/cm-width, Tc of 86.5 K and Jc of 2.0 MA/$\textrm{cm}^2$. The film also exhibits a homogeneous and dense surface morphology.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.3
• /
• pp.209-217
• /
• 2019

EMP (Electromagnetic Pulse) usually means High Power Electromagnetic Wave (HPEM). In the case of the shielding plate against the EMP, there is a possibility of deterioration of the electromagnetic wave shielding performance due to the skill of the constructor, bad construction, deformation of the shielding plate at the connection portion (joint portion). The inefficient use of space due to the separation distance is also pointed out as a problem. Therefore, this study aims to derive the optimum electromagnetic shielding condition by applying ATMSM to concrete as a part of securing electromagnetic wave shielding performance with reflection loss against concrete wall. Experimental parameters included concrete wall thickness and application of Zn-Al ATMSM. For the concrete wall, the wall thickness was 100 to 300mm, which is generally applied, and experimental parameters were set for the application of Zn-Al metal spraying method to evaluate electromagnetic shielding performance. Experimental results showed that as the thickness increases, the electromagnetic shielding performance increases due to the increase of absorption loss. In addition, after the application of Zn-Al ATMSM, the average shielding performance increased by 56.68 dB on average, which is considered to be increased by the reflection loss of the ATMSM. In addition, it is considered that the shielding performance will be better than that when the conductive mixed material and the ATMSM are simultaneously applied.

• Journal of Welding and Joining
• /
• v.34 no.3
• /
• pp.69-76
• /
• 2016

Characteristics of dissimilar metal welds between ASTM Type 316L and carbon steel ASTM A516 Gr.70 made with FCAW were evaluated in terms of microstructure, ferrite content, EDS analysis, hardness, tensile strength, impact toughness and corrosion resistance. Three heat inputs of 10.4, 16.9, 23.4kJ/cm were employed to make joints of dissimilar metals with E309LMoT1-1 wire. Microstructure of dissimilar weld metals consisted of mostly vermicular type of ${\delta}$-ferrite and some lathy type of ${\delta}$-ferrite, and ${\delta}$-ferrite was transformed into globular type in reheated zone. In all conditions, weld metals were solidified on FA solidification mode. Based on the EDS analysis of weld metals, All Creq/Nieq values were in the range of FA solidification mode, and it was decreased with increasing heat inputs whereas it was increased with increasing layers. The amount of ${\delta}$-ferrite was decreased with increasing heat input due to the difference of cooling rate, and it was increased with increasing layers. Accordingly, hardness and tensile strength of dissimilar metals weld joints was decreased with increasing heat input while impact energy was increased with increasing heat input. Corrosion test of dissimilar metals weld joints showed that weight gain rate of heat input 10.4kJ/cm was the greatest, and that of three heat inputs became constant after certain time.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.17.1-17.1
• /
• 2009

발포금속은 1948년에 Sosnik에 의해 알루미늄에 수은을 증발시키는 방법으로 발포 알루미늄을 제조한 이래, 1951년 Elliot에 의해 진보된 방식인 발포 매개체를 용탕에혼입하는 방법으로 발포금속을 제조하기 시작하였다. 현재 이들 선진국가의 생산방법 및 현황은 균질 기공의 조절, 연속주조 방식과 원가절감, 그리고 제조기술의 진보를 통하여 다양한 분야에 적용되고 있다. 그러나 실용화를 위해서는 요구특성을 만족하고 동시에 가격 경쟁력을 가진 제조기술의 보유 및 개발과 독특한 특성을활용한 새로운 적용 분야의 개척이 필요하다고 생각되며, 이를 위해 Harvard, MIT, Aachen, HMI 등 구미 유수 대학과 NASA, 미국방성등의 연구기관, ERG, 신강(新鋼) wire등 산업체를 중심으로제조 및 특성평가에 관한 기초연구와 활용방안이 활발히 모색중에 있다. 그리고 일부 자동차 생산 업체를중심으로 발포금속을 적용한 초경량, 에너지 절감형의 자동차 부품 소재,항공기 방열판 등에 대한 연구가 활발하게 진행되고 있다. 특히 금속 기체의 GASAR 공법은 Lotus 공법으로 Osaka 대학에서 개발되어 열교환기, 항공기, 방열기 등으로 응용이 확대되고 있다 국내에서 완제품생산은 실내장식용 복합패널로서 한소 프라임이 운영상의 문제로 생산을 중단하였으며, 유닉슨(주), 금강(주)에서 Batch식, 금성산업에서 Pot식이 일부 생산 및 연구가 진행되었으나 현재는 본연구실의 협조로 (주) 폼텍에서 발포패널을 주로 생산하고 있고 (주)드림메탈과 (주)아크로폼텍에서일부 생산되고, (주)동일알루미늄에서는 폐 scrap을 이용한 발포 Al 제조가 연구단계에 있다. 생기원에서는 분말 가열 흡음패널이 개발되었으나 강도와 내열성이 낮아 이들 특성을 향상시크는 연구가 진행중이다. 이들 제품은 성능상으로는 동양강판의 흡음패널과 KIMM의 필터용은연구개발이 낮은 수준이며, 본 연구팀과 공동 개발한 (주)폼텍의 복합패널은 10여 가지의 실용특허로 건축마감재로서 오히려 선진국수준을능가한 상태이다, 한편, 발포금속 기능성 개발은, 이들이 가지고 있는 우수한 특성 때문에 군수용으로부터 민수 산업용까지 전분야에 적용이 가능한 소재이므로 수요처를확장하고 있으므로 제품의 균질성, 안정성과 기능성 개발 향상을 위해 지속적이고 체계적인 연구가 필요하다고 생각된다.

• 전자공학회논문지 IE
• /
• v.47 no.2
• /
• pp.13-20
• /
• 2010

This paper describes a current mode PWM DC-DC converter IC for battery charger and supply power converter for portable electronic devices. The maximum supply voltage of IC is 40[V] and 2.8[V]~330[V] DC input power is converted to higher or programmed DC voltage according to external resistor ratio or wire winding ratio of transformer. The maximum supply output current is 3[A] over and voltage error of output node is within 3[%]. The whole circuit needed current mode PWM DC-DC converter circuit is designed. The package dimensions and number of external parts are minimized in order to get a smaller hardware size. The power consumption is smaller then 1[mW] at stand by period with supply voltage of 3.6[V] and maximum energy conversion efficiency is about 86[%]. This device has been designed in a 0.6[um] double poly, double metal 40[V] CMOS process and whole chip size is 2100*2000 [um2].

• Fashion & Textile Research Journal
• /
• v.20 no.2
• /
• pp.219-225
• /
• 2018

The purpose of this study is to make an ideal dummy for adult Maltese with proper investigation of its character and direct measurement of dog body-shape. The results of the study are as follows; First, there were 6 factors to affect the characteristics of Maltese body in the analysis, which are size of body, leg shape, chest shape, leg thickness, body length, length between fore-legs. In the cluster analysis with the 6 factors there were two types of Maltese body. Type 1 has body characteristics with large body, thick leg, and small distance between front legs. Type 2 has average size of all factors including body size, leg thickness, and length between fore-legs. Second, type 2 was selected as a representative one to make a dummy reflected body shape of characteristics because it took 67.71% from entire considered factors and has average value in the measured size. The first dummy pattern was planned by copying the surface area of the representative body shape with the method of surgical tape. A dummy of single body with trunk and legs was made using 30's cotton cloth, polyester inside batting, compressed form PVC and metallic wire on the joint of trunk and legs to support dummy shape. The second pattern was made by correcting size difference of the pattern and adding the pattern of neck covering plate, metal magnetic button was inserted on the center of joint area of trunk and legs to make detachable legs for easy slip on and off the pet's wear.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.1
• /
• pp.30-35
• /
• 2016

Tandem arc welding is a guarantor for high efficiency and cost saving since the quantity of wire which is deposited in the welding is approximated 30% greater that in conventional welding. The welding process is now being successfully applied in many industries. However, in the case of tandem arc welding, good quality and high productivity should depend on the welding parameters. Therefore, an intelligent algorithms for the automatic tandem arc welding process has been necessarily required. In this study, a predictive model based on the neural network by using the data acquired during tandem gas metal arc (GMA) welding process has been developed. To verify the reliability of the developed predictive model, a mutual comparison with the surface of the top-bead width obtained from actual experiments has been analyzed.

• Journal of the Korean Vacuum Society
• /
• v.16 no.6
• /
• pp.439-445
• /
• 2007

SiGe integrated circuits are being used in the field of high-speed wire/wireless communications and microwave systems due to the RF/high-speed analog characteristics and the easiness in the fabrication. Reducing the resistance variation in SiGe thin film resistors results in enhancing the reliability of integrated circuits. In this paper, we investigate the causes that generate the resistance nonuniformity after the silicon-based thin film resistor was fabricated, and consider the counter plan against that. Because the Ti-B precipitate, which formed during the silicide process of the SiGe thin film resistor, gives rise to the nonuniformity of SiGe resistors, the boron ions should be implanted as many as possible. In addition, the resistance deviation increases as the size of the contact hole that interconnects the SiGe resistor and the metal line decreases. Therefore, the size of the contact hole must be enlarged in order to reduce the resistance deviation.

• Journal of the Korea Furniture Society
• /
• v.19 no.6
• /
• pp.439-446
• /
• 2008

High Tech Design manner is a design concept that had been constantly discussed in constitution process of the West art history and modem ideology and had been experimented in industry, having started from futurism and structuralism in the early 20th century through Kinetic Art & Technology Art and up to now. High Tech Design had a great influence also on Post Modernism and more important is that this manner of design will be existing continually in the future too. From the modem times when machine civilization started, the artist and designers expressed a utopia will showing the future world with help of High Tech Design and modem people are realizing technology images as a utopia, in the space and material presented by this high tech design. And this utopia imply the images of dynamic power, speed making a voyage in universe, dream of future, hope, mass production, earth's environment, wealth etc. High Tech furniture was lightly designed by using thin steel wire, structure stressing the metallic characteristic and tempered glass, and it was used for presenting a convenient interior space visually, and with that it can make a unified sense in High Tech interior space, and a contrary effect compared with minimal space. High Tech Design equipped with glass and metal materials looking inappropriate for our interior space due to their sharp and cold image has been regularly used as living furniture, not only decoration function, and then there must be reasons for that. This study intends to research how High Tech Design has been changed and developed in the design history & West art history from the early 20th century, and to present it's value of development as data orienting, namely a direction for the industry of the next-generation and furniture design.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.8
• /
• pp.1070-1074
• /
• 2014

With the development of the electronics industry and widespread supply of many different electrical appliances, the factors of the electrical fires are also diversified. For this reason, the fuse, safety-critical component, needs accurate and stable operating characteristics for preventing various fire factor, and also needs various operating characteristics. Especially when the all electrical resistance are dropped by internal short of circuit, high current inrushes and makes the fire. In order to prevent this, very fast acting fuses should be applied. However, existing very fast acting characteristics fuse has less wire dimension of element Ag100% metal than that of fast acting fuse, and it is made of plating with low melting point metals, so it satisfy very fast acting but it can't satisfy durability and safety. For this reason, in this study, through the analyzing fusing characteristics of Ag-Cu alloy composition, the new alloy composition, which implement to very fast acting fuse without decrease of fuse elements dimension, is suggested. And this study classify the operating characteristics changes, a resistance change, and the rated current of the fuse in the overall composition change of Ag-Cu alloying. and it can be utilized for designing fuse.