• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.133-139
• /
• 2004

High speed machining (HSM) can reduce machining time with the high metal removal rate by high speed spindle and feedrate. This paper supports HSM technology using the small size tool with the optimal tool path generation and modification of tool change. The optimum tool path is generated to reduce cutting length of cavity pattern and change the cutting tool for preventing the tool breakage by wear. The tool path is modified with the experiment data of tool wear and breakage to support tool change on reasonable time. The result can contribute to HSM technology of high hardness materials using the small size end-mill.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.5 s.72
• /
• pp.63-69
• /
• 2006

An isolated bridge using a laminated rubber bearing provides an elastic support of continuous span and prevents the transmission of excessive seismic force from the substructure of the bridge, which uses a metal bearing, as this permits a relative displacement between the super-and substructure. Hawever, this kind of bridge is caused long periodic, as a result of enlargingtotal thickness of the rubber, since it corresponds to temperature change and increases the horizontal displacement of the superstructure. This paper uses a numerical study to describe the pounding problem between adjacent decks when subjected to a strong earthquake. Furthermore, numerical results are clarified for the buffer rubber used to mitigate the pounding force between adjacent decks.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1994.06a
• /
• pp.163-172
• /
• 1994

The Aerospace and automobile industries have need to avoid sheet-metal forming problem such as incorrect springback after forming and trimming process, excessive thinning/tearing, wrinking/perkering. It is common practice to use costly trial-and-error experimental methods to develop tooling and manufacturing process parameters. Experimentation should be complemented with computer simulation to reduce cost and leadtime in manufacturing and to influence the design of components. In this study, firstly we solved the springback problem after drawing and trimming process of KFP(F100-229) engine airsealing bearing support part(53H00) forming and studied on the effect of several process parameters on the gap between the formed blank and punch shape using the implicit F.E.M code(ABAQUS). Secondly by the three dimensional dynamic analysis using the explicit. F. E. M code (LS-DYNA3D), we studied on the effect of several process parameters which can be used for avoid tearing and wrinking during the drawing process.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1994.04a
• /
• pp.627-632
• /
• 1994

This study suggests the contingency framework understanding the implementation of NIMT and conducts empirical analysis using survey data. The main objectives of the thesis are as follows : (1) analyzing the relationship between adaptation requirements and organizational adaptation efforts. (2) analyzing the relationship between organizational adaptation efforts and implementation performance, and the moderating effect of the adaptation requirements. (3) analyzing the relationship between organizational adaptation efforts and organization characteristics(organization size, technical capability, top management support). A field study was undertaken to test the hypothesized relationships among adaptation efforts, adaptations requirements, organization characteristics, implementation performance. Data were collected from 52 NMT implementation projects of 45 machine tool, metal component firms. The emprical relflts indicated that adaptation requirrnents, organization characteristics were significantly related to organizational adaptation efforts and adaptation efforts can significantly improve implementation perfomance, but the moderating effect of adaptation requirements on adaptation efforts and implementation performance was not supported.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2002.05a
• /
• pp.35-41
• /
• 2002

Dense oxygen ionic conducting materials can be used for oxygen separation membranes at high temperatures. However, they show relatively low permeation flux because of their large resistances. To reduce resistances and improve the oxygen permeation flux, thin dense yttria-stabilized-zirconia (YSZ)/Pd composite dual-phase membranes were fabricated by a new approach that combines the reservoir method and chemical vapor deposition (CVD). A thin porous YSZ layer was coated on a porous alumina support by dip-coating the YSZ suspension. A continuous Pd phase was formed inside pores of the YSZ layer by the reservoir method. The residual pores of the YSZ/Pd layer were plugged with yttria/zirconia by CVD to ensure the gas tightness of the membranes. The oxygen permeation fluxes through these composite membrane were 2.0$\times$10$^{-8}$ mol/cm$^2$.s and 4.8$\times$10$^{-8}$ mol/cm$^2$.s at 105$0^{\circ}C$ when air and oxygen were used as the permeate gases, respectively. These oxygen permeation values are about 1 order of magnitude higher than those of pure YSZ membranes prepared under similar conditions.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.707-708
• /
• 2000

Colloidal gold with a conducting polymer (e.g., polyaniline) bound on the metal surfaces has been used for the generation of conductimetric signal in a membrane strip immunosensor. Since polyaniline itself at a low pH range revealed a low conductivity, an approach of doping the polymer with a lithium salt was used. As an alternative method, a self-doped (i.e., pH-independent) sustance such as leucoemeraldine base sulfonated polyaniline (LEB-SPAN) can be used as signal generator. It was also highly soluble in water and, thus, such a selected polymer was expected to support a satisfactory property as a label of the immunosensor.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.2
• /
• pp.122-126
• /
• 2000

A major mechanical problem with total hip replacement is the loosening of the femoral component. The loss of proximal support, with firm fixation distally, has been thought to be a major caused of fatigue failure of femoral stems. While many causes have been proposed, the most frequently suggested cause of the calcar resorption is the disuse atrophy of the cortex of the calcar due to the stress shielding of the proximal bone by the metal femoral stem. In this research, the new-designed stem(modified collar stem) was considered which made a hole inside stem and had a 3 mm thickness. Using the 3-dimensional finite element methods, the common collar stem and the modified colla stem was modeled and analysed. Also, the two models was compared. The results showed that the modified collar stem decreased the stress-shielding and it made a effective load transfer at the entire femoral region.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.105-108
• /
• 2001

4 32-bit RISC core is designed for embedded application and DSP. This processor offers low power consumption by fully static operation and compact code size by efficient instruction set. Processor performance is improved by wing conditional instruction execution, block data transfer instruction, multiplication instruction, bunked register file structure. To support compact code size of embedded application, It is capable cf executing both 16-bit instructions and 32-bit instruction through mixed mode instruction conversion Furthermore, for fast MAC operation for DSP applications, the processor has a dedicated hardware multiplier, which can complete a 32-bit by 32-bit integer multiplication within seven clock cycles. These result in high instruction throughput and real-time interrupt response. This chip is implemented with 0.35${\mu}{\textrm}{m}$, 4- metal CMOS technology and consists of about 50K gate equivalents.

• Elastomers and Composites
• /
• v.53 no.1
• /
• pp.13-18
• /
• 2018

A face seal comprising a metal ring and acrylonitrile butadiene rubber (NBR) was installed in the driving part and suspension unit. The seal serves as a bearing and simultaneously prevents entry of foreign matter from external environment as well as internal oil leakage. Subsequently, the rubber-rod ring generates axial pressure owing to rubber elasticity (hardness), performs static sealing function between housing details and outer diameter of seal, and transmits rotational torque to the rotating support ring. In order to improve the durability of NBR, which performs the above tasks, and to effectively use it in tracked-vehicle applications at extreme temperatures, this study reports a mixing design approach to enhance cold and oil resistances of NBR.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.7
• /
• pp.15-22
• /
• 1997

A 10Gbit/s limiting amplifier IC for optical transmission system was implemented with AlGaAs HBT (heterojunction bipolar transistor) technology. HBTs with 2x10.mu. $m^{2}$ and 6x20.mu. $m^{2}$ emitter size were used. The HBT structures are based on metal-organic chemical vapor deposition (MOCVD) epitxy and employ a mesa structure with self-aligned emitter/base and sidewall dielectric passivation. IC was designed to support differnetial input and output. Small signal performance of the packaged IC showed 26dB gain and $f_{3dB}$ of 8GHz. A single ouput has 800m $V_{p-p}$ swing with more than 26dB dynamic range. The performance of the limiting amplifier was verified through single mode fiber320km transmission link test.est.