• Journal of the Korean Vacuum Society
• /
• v.4 no.S2
• /
• pp.131-138
• /
• 1995

The broad beam ion sources of hot filament plasma type have widely used for modifications of materials and thin films, and the new type intensive current broad beam metal ion source including reactive gaseous ion beams is needed for preparing the hard coating films such as DLC, $\beta-C_3N_4$ Carbides, Nitrides, Borides etc. Now a electorn beam evaporation(EBE) broad beam metal ion source has been developed for this purpose in our lab. CN film has been formed by the EBE ion source. Study of the CN film shows that it has high hardness(HK=5800kgf/$\textrm {mm}^2$)and good adhesion. This method can widely changes the ratio of C/N atom's concentrations from 0.14 to 0.6 and has high coating rate. The low energy pocket ion source which was specially designed for surface texturing of medical silicon rubber was also developed. It has high efficiency and large uniform working zone. Both nature texturing and mesh masked texturing of silicon rubbers were performed. The biocompatibility was tested by culture of monocytes, and the results showed improved biocompatibility for the treated silicon rubbers. In addition, the TiB2 film synthesized by IBED is being studied recently in our lab. In this paper, the results which include the hardness, thickness of the films and the AES, XRD analysis as well as the tests of the oxidation of high temperature and erosion will be presented.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.3
• /
• pp.53-59
• /
• 2001

There is a lot of method to manage the insanitary landfill but vertical cutoff walls have been widespreadly used and were installed into the subsurface to act as a barrier to horizontal groundwater flow, The stabilized material such as specialized cement or mixed soil with additives has been generally applied for the materials of the deep soil mixing barrier in korea. The amount of the stabilized material is dependent on the field conditions, because the mixing ratio of the material and the field soil should achieve a requirement in the coefficient of permeability, lower than 1.0$\times$$10^{7}$cm/sec. This study determined the quantity and optimized function ratio of the stabilized material in the formation process of the mixed barrier that was added with stabilized material on the field soil classified into SW-SC under USCS (Unified Soil Classification System). After that the fly ash and lime were selected as an additives an that could improve the function of the stabilized material and then the method to improve the functional progress in the usage of putting into the stabilized material as an appropriate ratio was studied and reviewed. The author used the flexible-wall permeameter for measuring the permeability and unconfined compressive strength tester for compressive strength, and in the view of environmental engineering the absorption test of heavy metals and leaching test regulated by Korean Waste Management Act were performed. As the results, the suitable mixing ratio of the stabilized material in the deep soil mixing barrier was determined as 13 percent. To make workability easy, the ratio of stabilized material and water was proven to be 1 : 1.5. With the results, the range of the portion of the additives(fly ash : lime= 70 : 30) was proven to be 20-40% for improving the function of the stabilized material, lowering of permeability. In heavy metal absorption assessment of the mixing barrier system with the additives, the result of heavy metal absorption was proved to be almost same with the case of the original stabilized material; high removal efficiency of heavy metals. In addition, the leaching concentration of heavy metals from the leaching test for the environmental hazard assessment showed lower than the regulated criteria.

• Korean Journal of Ichthyology
• /
• v.26 no.3
• /
• pp.159-170
• /
• 2014

The effect of substances discharged from copper alloy mesh on the survival rate, growth, and health status of Sebastes schlegeli was investigated. Survival rate of experimental group was 10% higher than control group. There was no significant difference in weight gain and SGR between control group and experiment group (P<0.05). Glucose concentration was lower in the experimental group than that in the control group. GOT and GPT contents did not show significant difference during experiment except for the early three months of experiment (P<0.05). Ammonia concentration had not significantly changed in the experimental group, but it had increased until four months of experiment and then decreased afterwards in the control group. TCHO had decreased in the experiment group compared with that of control group. Copper and zinc contents had increased as compared with those in the initial stage of experiment with no significant difference between experiment group and control group (P<0.05). Histological analysis for the liver revealed that liver tissues were not particularly different from those in control group. There were no significant differences in survival rate, growth, and hematological characteristic between control group and experiment group (P<0.05). Though copper and zinc were accumulated as compared with those during the initial stage of experiment, the levels were lower than permissible levels for copper and zinc. As a result, copper alloy mesh would not adversely affect on the survival rate, growth, and health status of fishes.

• Journal of Environmental Science International
• /
• v.18 no.1
• /
• pp.61-72
• /
• 2009

Fabrication and oxidants production of 3 or 4 components metal oxide electrode, which is known to be so effective to destruct non-biodegradable organics in wastewater, were studied. Five electrode materials (Ru as main component and Pt, Sn, Sb and Gd as minor components) were used for the 3 or 4 components electrode. The metal oxide electrode was prepared by coating the electrode material on the surface of the titanium mesh and then thermal oxidation at $500^{\circ}C$ for 1h. The removed RhB per 2 min and unit W of 3 components electrode was in the order: Ru:Sn:Sb=9:1:1 > Ru:Pt:Gd=5:5:1 > Ru:Sn=9:1 > Ru:Sn:Gd=9:1:1 > Ru:Sb:Gd=9:1:1. Although RhB decolorization of Ru:Sn:Sb:Gd electrode was the highest among the 4 components electrode, the RhB decolorization and oxidants formation of the Ru:Sn:Sb=9:1:1 electrode was higher than that of the 3 and 4 components electrode. Electrogenerated oxidants (free Cl and $ClO_2$) of chlorine type in 3 and 4 components electrode were higher than other oxidants such as $H_2O_2\;and\;O_3$. It was assumed that electrode with high RhB decolorization showed high oxidant generation and COD removal efficiency. OH radical which is electrogenerated by the direct electrolysis was not generated the entire 3 and 4 components electrode, therefore main mechanism of RhB degradation by metal oxide electrode based Ru was considered indirect electrolysis using electrogenerated oxidants.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.4
• /
• pp.141-158
• /
• 2016

The objective of this study is to examine the type and characteristics of hat, and also to analyze the formative characteristics of hats shown in $Pr{\hat{e}}t-{\grave{a}}$-porter Collection. The literature review focused on the relevant technical books and preceding researches while the case study targeted 1,561 photos of hats shown in the 'Donga TV Collection'. The research range was from the S/S season of 2012 to the F/W season of 2015/16. The results of this study are as follows. 1. A hat is composed of crown and brim. In the results of classifying hats based on it, there were 572 crown-type hats, 533 hat-type, 219 cap-type, 156 irregular-type, and 81 brim-type in the order. 2. For the crown-type hats, they were mainly like cylindrical-type, bell-type, dome-type, and circle-type, using colors like black, beige, brown, red, mustard, and grey, and materials like wool, fur, velvet, straw, and metal while they were decorated with bead or lace. 3. For the hat-type hats, they were mainly like bell-type, ladder-type, and hemisphere-type, using colors like peach, white, gold, brown, and khaki, and materials like silk, cotton, straw, and wool while they were decorated with feather and ribbon. 4. For the cap-type hats, they were mainly like hemisphere-type, using colors like white, black, khaki, mustard, and purple, and materials like fur, leather, and wool while they were decorated with wappen and chain. 5. For the irregular-type hats, they were mainly like sandglass-type, box-type, animal-type, trumpet-type, and bell-type, using colors like purple, orange, pink, yellow, and sky-blue, and materials like metal, feather, mesh, plastic, straw, and linen while they were decorated with ribbon, net, bell, and flower. 6. For the brim-type visor, they were mainly like square-type, using colors like transparent, yellow, and black, and materials like plastic, cotton, leather, and metal.

• Journal of the Korean GEO-environmental Society
• /
• v.6 no.3
• /
• pp.35-45
• /
• 2005

The rockfall protection fence is one of the most common rockfall protection methods in Korea. The typical rockfall protection fence consists mainly of three parts ; H-beam supports, wire meshes, and wire ropes. The design of the rockfall protection fence is made such that the total energy absorbing capacity of the fence. Therefore, resulting from the combined energy absorbing capacity of the three parts is larger than the falling energy of rocks. In present study, a new rockfall protection fence, constructed using expanded metals instead of the existing wire rope and wire mesh for the typical type of rockfall protection fence, was evaluated on its performance by conducting both laboratory and field tests. Also, for a comparison, the same tests were performed on the typical rockfall protection fence. The test results revealed that the expanded material is an economic alternative to the existing protection materials and the expanded metal rockfall protection fence exhibits the higher energy absorbing capacity compared to that of the typical rockfall protection fence.

• Korean Journal of Bronchoesophagology
• /
• v.10 no.2
• /
• pp.5-8
• /
• 2004

Stenosing airway disease is classified as intraluminal obstruction, extrinsic compression, and malacia by the anatomical site of the lesion. Stenting therapy is indicated for symptomatic relief of life-threatening dyspnea caused by the last two types. Airway stents are made with metal mesh and/or silicone rubber, and currently more than 20 kinds of stent are available. Among many kinds of silicone stent, the Dumon stent is mostly widely used for benign and malignant airway stenoses, but general anesthesia and rigid bronchoscopy are needed for insertion. It can be removed when the stenosing airway disease subsides completely. In many clinical studies, most patients $(85-90\%)$ improved immediately after stenting, and procedure-related mortality was low $(<3\%)$ in experienced centers. Stent displacement, mucus impaction, and granulation tissue formation are potential complications. Stenting is one of many effective therapeutic modalities for stenosing central airway disease. Careful patient selection, experiences, and continuous development of new technology will bring better results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.10
• /
• pp.1517-1525
• /
• 2004

Shell finite elements are widely used for the analysis of thin section objects such as sheet metal parts, automobile bodies and et al. due to their computational efficiency. Since many of input data for finite element analysis are given as solid models or triangulated surface models, one should extract midsurface information from these input data initially and then construct shell meshes on the extracted midsurfaces. In this paper, a method of generating shell elements on midsurfaces directly from input models has been proposed, in which midsurface generating process can be omitted. In order to construct shell meshes, the input models should be triangulated on surfaces first, and then tetrahedral elements are generated by using an advancing front method, and finally mid shell surfaces are obtained from tetrahedral meshes. Some examples are given to demonstrate the efficiency of the proposed method.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1058-1062
• /
• 2004

High-temperature cylindrical stainless steel/sodium heat pipe was manufactured and tested under long-term operation. The container material was stainless steel 316L and the working fluid was sodium. The heat pipe was 25.4 mm in diameter and 1000 mm in length with a two-layer screen mesh wick. The evaporator part was 600 mm and the condenser part was 300 mm in length. Total measurement points on heat pipe were 15 points and 12 points were located in condenser part. The heat pipe was heated for 142 days(3400 hours) at $800^{\circ}C$. In the test period, the maximum temperature difference was increased from $18^{\circ}C$ o $28^{\circ}C$ and the maximum thermal resistance was as low as $0.015^{\circ}CW$.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.207-210
• /
• 2005

In this paper, a two-dimensional cross-channel model was applied to investigate influence of the gas diffusion layer(GDL) property and flow field geometry in the anode side for proton exchange membrane fuel cell(PEMFC). The GDL is made of a porous material such as carbon cloth, carbon paper, or metal wire mesh. To the simplicity, the GDL is represented as a block of material containing numerous pathways through which gaseous reactants and liquid water can pass. The purpose of present work was to study the effect of the GDL thickness and the porosity, and flow field geometry by computational fluid dynamics(CFD)