• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권1호
• /
• pp.85-93
• /
• 2013

This study is conducted to evaluate the leaching of contaminants from mine tailing by natural water and finally to estimate the leaching and transportation of heavy metal contaminants by rainfall. In order to identify contaminated heavy metal of soil, 17 soil, 2 tailing and 2 waste dump and 2 control samples were taken at mine area and analyzed total metal contents. The leaching experiments were conducted using distilled water. Cu, Pb, Zn was extracted from the reddish mine tailing in a short period time, especially the extraction rate of Cu (45.0%) was highest. The contaminants were leached from the yellowish mine tailing within an hour and the leaching rate of Cd (42.0%) and Zn (17.2%) were relatively high. The reddish soil from the waste dump showed leaching of Cu (5.1%), Pb (4.0%) and Zn (3.3%), however the leaching rate was low except Mi (14.2%). From the yellowish soil sampled from the dumping site, the leaching of Cu (8.2%) and Ni (9.7%) was high while the leaching of Zn (0.2%) were relatively low.

• 한국응용과학기술학회지
• /
• 제26권1호
• /
• pp.80-86
• /
• 2009

This research was performed to evaluate heavy metal leaching characteristics of the sludge from paper mill process with sintering temperature. Heavy metal leaching of the sludge was characterized with Korean Leaching Test and Toxicity Characteristic Leaching Procedure. The test sludge was composed of 70.72% of moisture, 9.5% of volatile solids and 9.76% of fixed solids. As a result of XRF analysis, Fe was the highest inorganic element in approximately 83%, which implies the recycling possibility of the sludge in reuse of Fenton chemicals and artificial lightweight aggregate. Leaching of heavy metals from sintered sludge was lower than the dry ones. However, there was no significant difference in leaching characteristics between the sludges sintered at $350^{\circ}C$ and $650^{\circ}C$. Zn and Fe were leached more greatly in TCLP and KLT methods respectively.

• 한국광물학회지
• /
• 제31권2호
• /
• pp.67-73
• /
• 2018

본 연구는 acid bake-water leaching system (AWS)를 이용하여 Au 정광으로부터 경제적이고 친환경적인 유용금속 용출을 위하여 황산염 용매제의 적용성을 파악하는 것이다. AWS 실험은 전기로를 이용하여 다양한 baking 온도($100^{\circ}C{\sim}500^{\circ}C$)와 황산염 용매제($H_2SO_4$, $K_2SO_4$, $(NH_4)_2SO_4$, $MgSO_4$, $CaSO_4$) 조건에서 수행하였다. Baking 온도가 $400^{\circ}C$까지 증가할수록 유용금속의 용출률은 증가하였다. 용출시간에 따른 AWS 실험결과, 최대 용출률 조건은 $(NH_4)_2SO_4$ 용매제이었다. 본 연구를 통하여 $(NH_4)_2SO_4$ 용매제가 AWS를 이용한 유용금속 용출에 있어 효과적인 용매제로 사용가능함을 입증하였다.

• 자원리싸이클링
• /
• 제30권2호
• /
• pp.53-60
• /
• 2021

폐리튬이온배터리에 함유된 코발트, 니켈 및 구리를 회수하기 위한 공정 개발의 일환으로 단일금속과 금속혼합물의 침출을 조사했다. 이를 위해 산화제를 첨가하지 않은 무기산과 유기산을 침출제로 사용했다. 본 논문의 실험조건에서 산화제가 없는 무기산과 유기산에서 구리는 전혀 침출되지 않았다. 염산과 황산용액에서 산의 농도, 반응온도, 반응시간 및 광액농도를 변화시켜 단일 금속를 모두 용해시킬 수 있는 조건을 구했다. 또한 염산과 황산용액에서 금속혼합물로부터 니켈과 코발트를 99% 이상 침출시킬 수 있는 조건을 조사했다. 메탄술폰산으로 코발트와 니켈 금속혼합물을 침출시 낮은 반응온도에서 코발트가 선택적으로 침출됐다.

• 자원리싸이클링
• /
• 제17권6호
• /
• pp.24-33
• /
• 2008

전해생성염소를 산화제로 사용하여 폐인쇄회로기판으로부터 구리의 침출에 대한 연구를 수행하였다. 구리침출반응과 관련된 실험인자들의 영향을 정량적으로 파악하기 위하여 실험계획법을 적용하였다. 실험결과의 분산분석으로부터 전류밀도, 침출온도, 염산농도 그리고 침출온도와 염산농도의 교호작용 등이 구리침출에 유효한 인자로 나타났다. 이들 중 구리침출에 가장 큰 영향을 미치는 인자는 침출실험 결과해석의 95.7%출 차지하는 전류밀도로 분석되었다. 실험결과의 중회귀분석을 이용하여 침출실험 결과의 99%를 설명할 수 있는 침출 모델식을 얻었다. 또한 모델식을 통한 구리 등침출선의 예측으로부터 침출온도가 높아질수록 구리침출량의 증가에 대한 염산농도의 영향이 커지는 것을 알 수 있었다.

• 한국환경과학회지
• /
• 제26권8호
• /
• pp.955-966
• /
• 2017

Amendment of multi-binders was employed for the immobilization of metal(loid)s in field-contaminated soils to reduce the leaching potential. The effect of different types of multi-binders (lime/diammonium phosphate, diammonium phosphate/ladle slag and lime/ladle slag) on the solidification/stabilization of metal(loid)s (Pb, Zn, Cu and As) from the smelter soil and mine tailing soil were investigated. The amended soils were evaluated by measuring Toxicity Characterization Leaching Procedure (TCLP) leaching concentration of metal(loid)s. The results show that the leaching concentration of metal(loid)s decreased with the immobilization using multi-binders. In terms of TCLP extraction, the mixed binder was effective in the order of lime/ladle slag > diammonium phosphate/ladle slag > lime/diammonium phosphate. When the mixed binder amendment (0.15 g lime+0.15 g ladle slag for 1g smelter soil and 0.05 g lime+0.1 g ladle slag for 1 g mine tailing soil, respectively) was used, the leaching concentration of metal(loid)s decreased by 90%. However, As leaching concentration increased with diammonium phosphate/lime and diammonium phosphate/ladle slag amendment competitive anion exchange between arsenic ion and phosphate ion from diammonium phosphate. The Standard, Measurements and Testing programme (SM&T) analysis indicated that fraction 1 (F1, exchangeable fraction) decreased, while fraction 4 (F4, residual fraction) increased. The increased immobilization efficiency was attributed to the increase in the F4 of the SM&T extraction. From this work, it was possible to suggest that both arsenic and heavy metals can be simultaneously immobilized by the amendment of multi-binder such as lime/ladle slag.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.564-567
• /
• 2004

FAs and BAs indicated different chemical compositions and physical properties. Leaching of Pb in FAl and Cu in FA2 were 33.2mg/L and 5.92mg/L, these were high concentration above 30 and 2 times respectively in compared to permit level. Leaching of Hg and Cr were about 1/2 of permit level. When diatom was complexly mixed with portland cement, the 28 days compressive strength of mortar with FA2 was similar with that of control mortar. Furtherfore, leaching of heavy metal ions like as Pb, Cu, Hg, Cr was highly reduced.

• 미생물학회지
• /
• 제12권1호
• /
• pp.25-30
• /
• 1974

It was convinced that with a relatively small capital investment and with a low operating cost, appreciable amounts of cement copper could be produced from low-grade minerals by the application of a bacterial leaching method. For the recovery of cement copper from the impure pregnant solution, direct precipitation of copper with tin plates by a bacterial leaching method was feasible. The results obtained were as follows: 1)In order to remove the cement copper from the reducing metal, aeration and agitation method were more effective and economic than shaking method. 2)The rate of copper recovery from the pregnant solution was accerelated according to increasing quantities of reducing metal. However, the excess of reducing metal reduced the grade of cement copper. 3)Among the comparative experiments of copper recovery at each reaction temperature of $10^{\circ}C$, $20^{\circ}C$, and $30^{\circ}C$, the recovery rate of copper at $30^{\circ}C$from the pregnant solution was highest. 4)Direct cementation method on iron-containing metal was an excellent method for the recovery of cement copper in bacterial leaching.

• 자원리싸이클링
• /
• 제27권3호
• /
• pp.78-85
• /
• 2018

블랙드로스에 함유된 알루미나를 회수하기 위해 볼밀처리가 염산침출에 미치는 영향을 조사하였다. 볼밀처리 시간과 회전속도는 알루미나 침출에 큰 영향을 미치지 않았다. 최적의 볼밀처리(1시간, 700 rpm)에서 알루미나 침출은 침출시간과 온도에 영향을 받았다. 본 논문의 실험조건에서 산화마그네슘은 모두 용해되었으며, 칼륨, 철, 실리콘과 타이타늄 산화물은 일부만 용해되었다. 알루미나는 80% 정도 침출되었지만 상기 산화물이 미량 용해되므로 순수한 알루미나용액을 회수하기 위해서는 분리공정의 도입이 필요하다.

• 한국환경보건학회지
• /
• 제31권1호
• /
• pp.86-93
• /
• 2005

Because generally large amount of sludges are generated from the process of sewage and wastewater treatment, the management and controlment of those sludge has become a important issue in many researches. In this dissertation, we conducted the research to see the physico-chemical characteristics of sludges generated from various sources. Moisture of sludges were 81.5% in textile industries, 81.4% in frame metal industries, 80.7% in 1st metal industries. Volatile solid were 22.1% in hide · rubber industries, 21.9% in coke · petroleum industries. Fixed solid were 18.5% and 17.7% in the 1st metal industries and frame metal industries. High heating value by wet base were 1,850 kcal/kg in coke · petroleum industries, 1,220 kcal/kg in hide · rubber industries, but sludges from the 1st metal industries and frame metal industries were impossible to incinerate because most of those sludges were inorganic. The leaching test showed that hazardous materials was detected in nearly every kinds of sludges. Some of sludges from hide · rubber industries and frame metal industries exceeded the leaching criteria and so they were classified as specific wastes. And other sludges generated in sewage treatment plants or other industries was below the leaching criteria.