• Journal of the Mineralogical Society of Korea
• /
• v.30 no.4
• /
• pp.195-204
• /
• 2017

For evaluation of adsorption characteristics of heavy metals, precipitates were collected from stream bottom in the Dalseong mine. The removal of some heavy metals such as As, Cu, and Cd from aqueous solution is studied using a precipitates taken from acid mine drainage. The yellowish brown (Munsell color 8.75YR 5/10) and dark brown (Munsell color 2.5YR 3/8) precipitates that collected from the study area consist mainly of schwertmannite and goethite, respectively. The percentage removal or adsorption capacity of metals depends on the initial concentration and characteristics of adsorbent. Removal efficiency of the adsorbents shows the order for metal ions of As > Cu > Cd. The adsorption efficiency by absorbent of precipitates in low concentration metal aqueous solution were observed 67.00-85.00% for As, 26.24-29.08% for Cd, and 7.67-12.82% for Cu. As the initial concentration of metal ions was increased from 1 to 10 mg/L, adsorption amount of adsorbent increased from 0.29 to 1.29 mg/g of Cu of schwertmannite, and from 0.24 to 1.97 mg/g of goethite.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.987-989
• /
• 2006

1.52" $130(RGB){\times}130$ full color PM OLED device with $70\;{\mu}m{\times}210\;{\mu}m$ of sub-pixel pitch was fabricated using shadow mask method for metal cathode deposition. Instead of conventional patterning process to form cathode separator via photolithography, regularly patterned shadow mask was applied to deposit metal cathode in this OLED display. Metal cathode was patterned via 2-step evaporation using shadow mask with shape of rectangular stripe and its alignment margin is $2.5\;{\mu}m$. Technical advantages of this method include reduction of process time according to skipping over photolithographic process for cathode separator and minimizing pixel shrinkage caused by PR cathode separator as well as improving lifetime of OLED device.

• Fibers and Polymers
• /
• v.2 no.1
• /
• pp.157-162
• /
• 2001

Dyebath used for metal complex dyeing of nylon microfiber was recycled to reduce the overall amounts of metal complex dyeing effluents. Instead of discharging the dyebath after each dyeing cycle, the residual dyebath was analyzed spectrophotometrically and reconstituted to the required concentration of dyes and auxiliaries. Dyebaths were reused eight times and the CIELAB coordinates of dyed samples were measured after each recycling. Color difference($\Delta$E*) between the sample dyed in the fresh bath and that from reused dyebath was maintained below 1.5. The levelness and fastness of dyed fabrics from recycled dyebath were not impaired either. Chromium content of each recycled dyebath was similar to that of the first residual dyebath.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.32.3-32.3
• /
• 2018

We report a possible discovery of a relic of a dissolved star cluster in the Sextans dwarf spheroidal galaxy. Using the hk index (${\equiv}$(Ca-b)-(b-y)) as a photometric metallicity indicator, we have successfully discriminated the metal-poor and metal-rich stars in the galaxy and found an unexpected number density peak of metal-poor stars near the galaxy center. The analysis of color-magnitude diagrams reveals that they appear to be originated from an old, metal-poor globular cluster which might be slightly farther than the bulk of field stars in the galaxy. This supports the presence of the star cluster remnants in the galaxy which have been suggested by previous studies. If confirmed, dissolution of a star cluster provides a piece of evidence of a cored dark-matter halo profile for the Sextans dwarf galaxy.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.12
• /
• pp.2244-2248
• /
• 2008

High intensity metal halide discharge lamp performance, specifically the generated luminous flux and light color content, depends critically on the arc tube design. Factors influencing the design and consequent lamp efficacy include : lamp size, geometry, arc tube composition, fill chemistry, electrode design and excitation modes. Shaping of Polycrystalline Alumina(PCA) can be realized by conventional ceramic processes. Several processes are applied nowadays. Well-known in the ceramic high pressure field for decades are the pressing and the extrusion method. Newly developed slurry and precious forming technologies give the one-body seamless tubes, which improve thickness uniformity and lighting performance. Now, we reported some optical properties with different arc tube structures of ceramic metal halide lamps.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.6
• /
• pp.368-376
• /
• 1988

Transition metal PSSA ionomers containing Co(II), Ni(II), Cr(III), Ru(III), and Rh(III) are investigated by IR, Far-IR, UV-Vis and DSC. Reliable IR Spectroscopic criteria are established for assessing the degree of ion-exchange of PSSA ionomers and the local structures around metal cations in them. In the hydrated transition metal PSSA ionomers, the ionic groups are solvated by water molecules and there is no significant interactions between sulfonate group and metal cations. The visible spectra indicated that metal cations are present as [M$(H_2O)_6$]$^{n+}$ with Oh symmetry. Their $T_g$ values increase as the extent of ionic site concentration increases, but there is no direct dependence of $T_g$ on the nature of metal cations or their oxidation states. Thus, the water content in PSSA ionomer is found to have dominant influence on $T_g$ of hydrated transition metal PSSA ionomers. Dehydration of the hydrated transition metal PSSA ionomers results in direct interaction between ionic groups and significant color changes of the ionomers due to the changes of the local structures around metal cations. On the base of spectral data, their local structures are discussed. In case of dehydrated 12.8 and 15.8 mol % transition metal PSSA ionomers, no glass transition is observed in 25-$250^{\circ}C$ region and this is believed to arise from the formation of highly crosslinked structures caused by direct coordination of sulfonate groups of metal cations. In the 6.9 mol % transition metal PSSA ionomers, the glass transition is always observed whether they are hydrated or dehydrated and this is though to be caused by the sufficient segmental mobility of the polymer backbone.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.4 s.40
• /
• pp.381-392
• /
• 1991

The purpose of this is to investigate the color of Art Deco Fashion in Paris. (1920-1930) Through the age of Art Deco style, the enormous modern cities were built up and numerous life-constructions were designed conspiciously in Paris. Under this situation, the usage of the 'color' became very important element of design area and also it bestowed new form upon the modern design. The black beauty of Art Deco style was the outcomes of cubism, black-arts, and pragmatism. And the black beauty was regarded as the proper color to represent simplicity. Simplicity was the best way to express Art Deco style. The color and light of metal were used adequately to express a geometrical and streamline form; it was raised as a new beauty in this period. The primary colors were used to recognize the simplified forms effectively. New pastel colors, which signified differently with Art Nouveau were born centering around the Youth Culture like a summer resort and a sun bath. Also they expressed neon signs and atmosphere of beach by means of the tropical colors. At last the color of Art Deco style opened the new age. And it was started to use the various colors in design field from at this time.

• Korean Journal of Optics and Photonics
• /
• v.18 no.6
• /
• pp.383-388
• /
• 2007

A color filter was demonstrated incorporating a patterned metal grating in a quartz substrate. The filter is created in a metal layer perforated with a symmetric two-dimensional array of circular holes, with the pitch smaller than the wavelength of the visible light. A finite-difference time-domain simulation was performed to analyze the device by investigating the effect of structural parameters like the grating height, the period, the hole size, and the refractive index of the hole-filling material on its performance. The device performance was especially optimized by controlling the refractive index of the material comprising the holes of the grating. And two different devices were fabricated by means of the e-beam direct writing with the following design parameters: the grating height of 50 nm, the two pitches of 340 nm for the red color and 260 nm for the green color. For the prepared device with the period of 340 nm, the center wavelength was 680 nm and the peak transmission 57%. And for the other device with the pitch of 260 nm, the center wavelength was 550 nm and the peak transmission was 50%. The filling of the hole with a material whose refractive index is matched to that of the substrate has led to an increase of ${\sim}15%$ in the transmission efficiency.

• Korean Journal of Optics and Photonics
• /
• v.29 no.6
• /
• pp.268-274
• /
• 2018

In this study we suggest a humidity-sensitive color sensor using a one-dimensional photonic crystal and Hong Kong University of Science and Technology-1 (HKUST-1), which is a metal-organic framework (MOF) substance. One-dimensional photonic crystals have a photonic band gap, due to a periodic refractive-index change, and block and reflect light components in a specific wavelength band. The refractive index of HKUST-1 differs in dry and humid environments. Herein we designed a sensor using the presence of the photonic band gap, with FDTD simulation. As a result of optical analysis, the color conversion of the reflected light was superior to the color conversion of the transmitted light. When the center wavelength of the photonic band gap was 550 nm, the maximum peak value of the wet environment increased by a factor of about 9.5 compared to the dry environment, and the color conversion from achromatic to green was excellent as a sensor. The results of this study suggest the application of MOF materials to moisture sensors, and the nanostructure design of MOF materials will expand the applications to industrial devices.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.1
• /
• pp.20-26
• /
• 2002

HID(high intensity discharge)lamps include high pressure mercury lamp, high pressure sodium lamp and metal halide lamp. Metal halide lamps have been considered to be one of the most erective light sources. These lamps have good efficiency, good color rendering and good focusing capability. The objective of this research is to alum on the metal halide lamp(MH70W) by the developed electronic ballast with free voltage input(AC 100∼277V). The developed electronic ballast consists of a free voltage input converter, a flyback converter ＆ half-bridge inverter, ignitor ＆ protector and control1er. Experimental results show that developed electronic ballast turns on the metal halide lamp(MH70W) with free voltage input(AC 100∼277V) very well.