• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.2
• /
• pp.91-97
• /
• 2010

As nuclear power plants are getting older, interests on a decontaminating process are increasingly attracting more attention. Chemical decontamination is crucial to lower the production of radioactive waste and radiation dose rate. Prior to this, oxidizers and detergents for target material should be chosen so as to decontaminate major systems and components of a nuclear power plant chemically. In order to decontaminate it properly, it is crucial to have information about the chemical composition and crystalline structure of CRUD, analyzing its samples from the target or the decontamination system with components. However, there is no program which enables the extraction of samples directly from the object or the decontamination system with components carrying genuine radioactivity. Therefore, it is limited to samples from corrosion products carrying partial radioactivity as a resource. The composition of CRUD varies considerably depending on refueling cycle because it is closely related to the constituent of basic material. After settling a target, it is crucial to analyze and obtain analytical information about CRUD as a decontamination target. In this paper, various technologies for manufacturing simulated CRUD are introduced as alternatives to unattained samples. A metal oxide or metal hydroxide was used to synthesize simulated cruds having chemical compositions and crystalline stricture similar to the actual one by 12 different methods. CRUD 4(metal oxides in the autoclave vessel) and CRUD 10(metal oxides in a crucible after hydrazing pretreatment)were chosen as the best method for Type 1 and Type 2.respectively. As these CRUD can be synthesized easily without using any specialized equipment or reagents in a short time and in large quantities, they are expected to stimulate the development of decontaminating agents and processes.

• Resources Recycling
• /
• v.32 no.2
• /
• pp.12-18
• /
• 2023

In 2018, the demand for silver (referred to as Ag) in the electrical and electronics sector was 249 million tons. The demand stood at 81 million tons in the solar module production sector. Currently, due to the rapid increase in solar module installation, the demand for silver is increasing drastically in Korea. However, Korea's natural metal resources and reserves are insufficient in comparison to their consumption, and the domestic silver ore self-sufficiency rate was as low as 2.2% as of 2021. This implies that a recycling technology is necessary to recover valuable metal resources contained in the waste plating solution generated in the metal industry. Therefore, this study compared and analyzed, the results of the impact evaluation through life cycle assessment according to an improvement in the process of recovery of valuable metals in the waste plating solution. The process improvement resulted in reducing GWP (Global Warming Potential) and ADP(Abiotic Depletion Potential) by 50% and 67%, respectively. The GWP of electricity and industrial water was reduced by 98% and 93%, respectively, which significantly contributed to the minimization of energy and water consumption. Thus, the improvement in recycling technology has a high potential to reduce chemical and energy use and improve resource productivity in the urban mining industry.

• Environmental and Resource Economics Review
• /
• v.18 no.2
• /
• pp.345-375
• /
• 2009

In this paper we examined the impact of mineral resources industry on the national economy and necessity of a mineral resources cycle technology development. For this purpose, the case study on Gagok polymetallic (zinc-lead-copper) mine, which is being re-developed, was carried out to study an anticipated effects of application of the full cycle technology. As a consequences of the study, if we apply the technology to a polymetallic (zinc-lead-cooper) mine, we can expect 55 billion won worth of import-substitution effect. Moreover, if applied to 10 similar mines, we can expect the 10.4% of import-substitution effect of the total imports annually. Also, national competitiveness in value chain of mineral industry will be promoted through the technological advancement in upper stream and the full cycle technology will render a service to the mineral industry to be the country's new growth engine.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.2
• /
• pp.114-118
• /
• 2013

Separation/recovery of valuable metals such as nickel or tin from copper based alloys has recently attracted from the viewpoints of environmental protection and resource recycling. In this report, preliminary study on concentration and separation of nickel from copper based alloy dross using selective adsorption by chelate resin was performed. The chelate resin used in this study has absorbed copper ions more easily than nickel ions in the metal solution, which could allow the concentration/separation of the nickel from the copper base alloy solution. The final molar ratios of Ni and Cu ions in the two concentrated solutions were 70 and 99 % respectively after three-time flowing the solution through the chelate resin column.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.1
• /
• pp.22-32
• /
• 2023

In general, when scrap is dissolved in an electric arc furnace, the amount of electric furnace steel dust (EAFD) generated is about 1.5% of the scrap charge amount, and the electric furnace steel dust collected by the bag filter is charged into the Rotary Kiln or Rotary Hearth Furnace (RHF), and the zinc component is recovered as crude zinc oxide, at which time a clinker of Fe-Base is generated. In this research, first, for the efficient resource conversion of electric furnace steel dust, a reduction and roasting experiment was conducted and the reaction kinetics was examined. As a result of the experiment, it was observed that the reduction and roasting reaction was actively conducted in the range of 1100~1150℃, and melting occurred in the range of 1250℃. In the past, this clinker was widely used as a roadbed material for road construction and an Fe-Source for cement production, but in recent years, it has been mainly reclaimed due to strengthening environmental standards. However, landfill treatment is by no means a desirable treatment method due to environmental pollution caused by leachate, expensive landfill costs, and waste of Fe resources. Therefore, in order to more actively recycle the Fe component in the clinker, first of all the clinker was pulverized into an optimal particle size, and anthracite and binder (starch) were added to the magnetic material obtained by specific gravity and magnetic separation for briquet. As a experimental results, it was possible to efficiently separate clinker as Fe component and other slag component by specific gravity and magnetic force. As a results of loading and dissolving the manufactured briquet clinker in an electric arc furnace, it was observed that the unit of power and production yield were clearly improved and the carbon addition effect in molten metal was also somewhat.

• Economic and Environmental Geology
• /
• v.41 no.5
• /
• pp.509-516
• /
• 2008

For analyzing resources demand appropriately, corresponding demand data is essential. But it is hard to get the suitable data of each resource demand, because every resources has various type as refined and many kind of alloyed. That reason makes many analyses to employ the data of refined metals as the representative quantity. But those refined metals are factors for producing final goods so those in domestic market are not always meant for producing domestic end goods. Thus in this paper, the domestic demands of refined copper, lead and zinc are analyzed empirically with 'intensity of use' and foreign countries' income variable applied model for recovering the data availability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3261-3266
• /
• 2012

Sodium borohydride($NaBH_4$) known as the material of hydrogen generation and storage can produce the hydrogen via catalytic hydrolysis. This protide chemical could be used in the hydrogen supply system for residential and mobile fuel cells, and thus many researches and developments regarding to these chemicals and decomposition reactions have been implemented. We experimented the hydrolysis of $NaBH_4$ alkaline solution by metal oxide-supported PGM(platinum group metal) catalysts and measured the generation rate of hydrogen which is product of decomposition reaction. We compared oxides as catalyst supports, and the precious metals, Pt and Ru for the catalysts and studied the effects of amounts of catalyst added and $NaBH_4$ concentrations on the hydrogen generation rates and patterns.

• Economic and Environmental Geology
• /
• v.49 no.2
• /
• pp.135-145
• /
• 2016

Until 2014, 14 million tonnes of Pb (metal based) and 41 million tonnes of Zn (metal based) were produced in Peru. Representative two Pb-Zn metallogenic belts were known in Peru. They are lower Cretaceous-Paleocene VMS Cu-Zn-Au metallogenic belt and Miocene epithermal, skarn, replacement & polymetallic vein metallogenic belt. If four new mining projects were launched and additional three mining projects were prepared until 2017, it seems possible to produce 0.34 million tonnes of Pb and 1.5 million tonnes of Zn additionally. In Pb-Zn metallogenic belt in Peru, potential Zn amounts range from 9 to 6000 million tonnes with 0.1 to 14% Zn and potential Pb amounts range from 5 to 2800 million tonnes with 0.04 to 5.3% Pb.

• Resources Recycling
• /
• v.22 no.5
• /
• pp.3-12
• /
• 2013

It is necessary to manage risk of metals which are has rigid supply structures and expected demand expansion, considering to industry structure and resource securing capacity of each country. Countries conducted various criticality analyses and selected mainly rare metals as critical materials(or Critical metals or Critical raw materials). This study examined cases of metals risk evaluation and management which are based on technology changes and imbalance supply-demand. EU and U.S.A evaluated risk on metals needed as supply expansion of renewable energy. Japan forecasted demand of rare metals needed in Japan's growth engine industry. U.K analyzed criticality of metals, considering environmental burden occurred from mining to refining. Critical materials has features such as weak price signal, inelastic supply structure, demand volatility in technology change.

• Resources Recycling
• /
• v.13 no.5
• /
• pp.3-16
• /
• 2004

There are over 190,000 tons per year of the sludge containing heavy metals (SHM) generated from industries in Korea. The SHM is so hazardous waste, it needs proper intermediate treatment before final disposal. At present, the common intermediate treatment and final disposal technologies of SHM are solidification and landfill. However, the future treatment and disposal technologies of SHM will be carry out to fulfill in both the environmental aspect and resource recycling. Thus, how to reduce the generation of SHM and recycle the valuable metal from SHM become the major subjects in the global world. In this article, in order to prospect the effective processing of SHM, the generation and processing of the sludge from plating wastewater, the research and development of valuable metal recycling technology and problems were summarized.