• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.670-673
• /
• 2002

Powder synthesis using the alkoxy precursor technique exhibits processing flexibility not available in traditional high temperature solid-state reaction. With proper process control, impurities can be reduced to very low levels. The major distinction of the present work lies in the method of accomplishing the hydrolysis reaction. In the present case, water is not added to the system. Instead the metal alkoxide/alcohol solution is heated to a temperature at which water is formed through dehydration of the alcohol solvent, causing precipitation of the corresponding metal oxide (hydroxide). The present method provides a means of producing amorphous alumina.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.737-744
• /
• 2011

탄화수소 계열의 점화원과 달리 선행 연구된 스팀 플라즈마 점화기를 이용한 알루미늄 분말의 지속 연소 성공을 바탕으로, 고온의 플라즈마를 이용한 알루미늄 분말의 점화 특성을 알아보기 위해 산화제가 없는 환경을 조성하여 점화 특성 확인 실험을 수행하였다. 아르곤 플라즈마를 이용하여 이전의 연소 실험과 동일한 4500 K의 온도 조건 및 이송 가스를 이용한 입자 공급 조건을 조성하여 실험을 수행하였으며, 플라즈마의 온도는 방출분광법을 사용하여 측정하였고 점화 특성은 SEM 촬영과 EDS 분석을 통해 비교 분석하였다. 고온의 플라즈마 제트 내부를 통과한 알루미늄 분말은 탄화수소 계열의 점화원과 다르게 급격한 기화로 인한 점화 촉진 효과를 확인 할 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권5호
• /
• pp.670-676
• /
• 2008

A diesel engine requires a high Performance of lubrication because of the extreme conditions such as high temperature and pressure during combustion process in a cylinder. Many researches to improve the lubrication performance on the extreme condition have been executed. The lubricant oil suspended with nano-metal particles is the one of the measure. In this study, the nano-lubricant oil is applied on a commercial diesel engine, and the engine performance is tested. The results show the increase of maximum torque and the decrease of cylinder pressure, exhaust gas temperature, CO emission.

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.795-800
• /
• 2021

Magnesium fires require early fire extinguishment due to impulsive and rapid-fire expansion that makes difficult fire fighting. For this reason, efficient early fire fighting and appropriate prevention of fire spread are considered mainly as significant fire extinction measures. However, there is a limit to developing tools for metal fire fighting, such as devices, facilities, and fire extinguishing agents, due to a lack of regulatory instruments in South Korea. It often generates challenges to early fire fighting implementation by fire responders. Thus, the aim of this study is to investigate a measure for securing the efficiency of early fire fighting in magnesium. This study identified the applicability of the metal fire extinguisher used in the United States for magnesium fire through a performance test of a fire extinguishing agent for metal fire. Moreover, we implemented a free burning experiment using magnesium powder to compare varying combustion and extinction process that could occur during applying metal fire extinguishers. Finally, this study suggests measures of the use and application of metal fire extinguishers for magnesium.

• 한국안전학회지
• /
• 제14권3호
• /
• pp.48-53
• /
• 1999

It is widely recognized that Hartmann tube for measuring the minimum ignition energy(MIE) of powder. But It requires long time and operational skills for measuring. As a variety of new fine powders are being produced day by day in industry, Japen has been developing a measurement system which employs a new method to create a dust/air mixture in a miniature combustion box. In this system, by vibration, the powder is successively fed downward through a hopper made up of metal mesh, and then it is formed into a thin, certain-like, dust/air mixture. With this new apparatus, three types of powder-Lycopodium, Anthraquinone, and Polyacry-lonitrile-were tested and the data of MIE were compared with those of a conventional apparatus (the Hartmann tube). Two of them agreed satisfactory, but the other, Anthraquinone, showed quite different values. It is guessed that the agglomerations of the powder particles appear because of particle shapes, static-charge and humidity.

• 한국분말재료학회지
• /
• 제31권4호
• /
• pp.336-341
• /
• 2024

Molybdenum, valued for its high melting point and exceptional physical and chemical properties, is studied in diverse fields such as electronics, petrochemicals, and aviation. Among molybdenum oxides, molybdenum dioxide stands out for its higher electrical conductivity than other transition metal oxides due to its structural characteristics, exhibiting metallic properties. It is applied as pellets to gas sensors, semiconductors, and secondary batteries for its properties. Thus, research on molybdenum dioxide compaction and pressureless sintering is necessary, yet research on pressureless sintering is currently insufficient. This study synthesized MoO₃ powder via solution combustion synthesis and reduced it using the 3% hydrogen/argon gas mixture to investigate the effect of reduction temperature on the powder. Additionally, the reduced powder was compacted and subjected to pressureless sintering with temperature as a variable. The density and the microstructure of brown parts were analyzed and discussed.

• 한국세라믹학회지
• /
• 제27권1호
• /
• pp.118-126
• /
• 1990

Titanium Cabride powders were prepared by the self-propagating high temperature synthesismethod in air from the mixture of metal titanium powder and carbon powder. The result are as follows : 1. The conversion effciency of higher than 95% can be obtained and the lattice constant value of the product was 4.322$\AA$. 2. The combustion mode, velocity and temperature of combustion wave was photographed using high-speed camera, and showed steady-state, velocity of 15.414mm/sec at 250$0^{\circ}C$. 3. The relative density and MOR strength of TiC sintered at 180$0^{\circ}C$ for 90 minutes by hot-pressing under the pressure of 200kg/$\textrm{cm}^2$ were 95% and 395MPa, respectively.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.424-428
• /
• 2012

공기흡입형 추진기관은 운용의 단순함, 저비용, 저장의 용이성 등의 장점으로 각광받고 있는 추진 기관이다. 본 논문에서는 Boron을 이용한 공기흡입형 추진기관의 가스발생기에 사용될 추진제 연구를 수행하였다. 이를 위하여, Amorphous Boron Powder를 적용한 추진제에 다양한 첨가제를 사용하여 연소특성을 파악하였고, Boron bead를 제조하여 추진제에 적용하여 Amorphous Boron Power를 적용한 추진제와의 차이점을 비교 분석 하였다.

• 한국분말재료학회지
• /
• 제21권2호
• /
• pp.124-130
• /
• 2014

The automotive industry is moving from the internal combustion engine to electric drive motors. Electric motors uses a high voltage system requiring the development of resources and components to shield the system. Therefore, in this study, we analyze electromagnetic interference (EMI) shielding effectiveness (SE) characteristics of an auto crash pad according to the ratio of electrically conductive materials and propylene. In order to combine good mechanical characteristics and electromagnetic shielding of the automotive crash pad, metal-coated glass fiber (MGF) manufacturing methods are introduced and compared with powder-type methods. Through this study, among MGF methods, we suggest that the chopping method is the most effective shielding method.

• The Korean Journal of Ceramics
• /
• 제5권3호
• /
• pp.217-223
• /
• 1999

Proten-conductive $SrZr_{0.95} Y_{0.05} O_{2.975}$ powder was prepared by citrate gel method its characteristics and sinterability were investigated. Amorphous gel could be obtained from a citric acid solution that $SrCO_3$ and metal nitrates were dissolved. The initial decomposition of the gel proceeded up to $250^{\circ}C$, followed by combustion of its decomposition products in the temperature range from $250^{\circ}C$ to $500^{\circ}C$. A well-crystallized perovskite phase with a stoichiometric composition after calcination at $1000^{\circ}C$. Sintering green compacts of this powder for 6 h showed a considerable densification to start at $1200^{\circ}C$ and resulted in 86.8% and 96.5% relative densities at $1400^{\circ}C$ and $1600^{\circ}C$, respectively. Whereas, the powder compacts prepared by solid state reaction had much lower relative densities, 73% at $1400^{\circ}C$ and 92% at $1600^{\circ}C$.