• Environmental Engineering Research
• /
• v.18 no.4
• /
• pp.229-234
• /
• 2013

This study aimed to develop a new dust collecting system equipped with an activated carbon (A.C.) coated electrode. Before fabrication, pre-treatment of A.C. was performed to remove metal ions within the A.C. to enlarge its specific surface area. Then, pre-treated A.C., black carbon, polyvinyl acetate (PVAc), and methanol were mixed to make a gel compound, which was coated onto aluminum plates to fabricate electrodes. The optimal mixing ratio of A.C., black carbon, PVAc, and methanol was found to be 10 g: 2 g: 3 g: 20 mL. After fabrication, the electrodes were used in the batch-type experiment for $NH_3$ and $H_2S$ removal. The reduction rates of the gases were high at the beginning and slowly reduced with time. Dust collection experiments were conducted in continuous flow, with various voltages applied. Compared to 5 kV, dust removal efficiency was 1.5 times higher when 10 kV was applied. Increasing the number of electrodes applied also increased the collecting efficiency. The correlation coefficient between actual collecting efficiency and trend line was higher than 99%. Consequently, the novel dust collection system equipped with A.C. coated electrode appears to be a promising substitute for existing dust-control devices.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.10
• /
• pp.1097-1103
• /
• 2011

Liquid droplet impingement erosion (LDIE) is caused by the impact of high-velocity droplets entrained in steam or air on metal. The degradation caused by the LDIE has been experienced in steam turbine internals and high-velocity airplane components (particularly canopies). Recently, LDIE has also been observed in the pipelines of nuclear plants. LDIE among the pipelines occurs when two-phase steam experiences a high pressure drop (e.g., across an orifice in a line to the condenser). In 2011, a nuclear power plant in Korea experienced a steam leak caused by LDIE in a pipe through which a two-phase fluid was flowing. This paper describes a study on the design change of a pipe affected by LDIE in order to mitigate the damage. The design change has been reviewed in terms of fluid dynamics by using the FLUENT code.

• Journal of Powder Materials
• /
• v.30 no.1
• /
• pp.13-21
• /
• 2023

In additive manufacturing, the flowability of feedstock particles determines the quality of the parts that are affected by different parameters, including the chemistry and morphology of the powders and particle size distribution. In this study, the microstructures and flowabilities of gas-atomized heat-resistant alloys for additive manufacturing applications are investigated. A KHR45A alloy powder with a composition of Fe-30Cr-40Mn-1.8Nb (wt.%) is fabricated using gas atomization process. The microstructure and effect of powder chemistry and morphology on the flow behavior are investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and revolution powder analysis. The results reveal the formation of spherical particles composed of single-phase FCC dendritic structures after gas atomization. SEM observations show variations in the microstructures of the powder particles with different size distributions. Elemental distribution maps, line scans, and high-resolution XPS results indicate the presence of a Si-rich oxide accompanied by Fe, Cr, and Nb metal oxides in the outer layer of the powders. The flowability behavior is found to be induced by the particle size distribution, which can be attributed to the interparticle interactions and friction of particles with different sizes.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.12
• /
• pp.37-42
• /
• 1999

In this paper, some of main processes for the next generation integrated circuits, such as Cu damascene process using CMP, electron beam lithography, $SiO_2$ CVD and RIE, Ti/Cu-CVD were carried cut and then, two level Cu interconnects were accomplished. In the results of CMP unit processes, a 4,635 ${\AA}$/min of removal rate, a selectivity of Cu : $SiO_2$ of 150:1, a uniformity of 4.0% are obtained under process conditions of a head pressure of 4 PSI, table and head speed of 25rpm, a oscillation distance of 40 mm, and a slurry flow rate of 40 ml/min. Also 0.18 ${\mu}m\;SiO_2$ via-line patterns are fabricated using 1000 ${\mu}C/cm^2$ dose, 6 minute and 30 second development time and 1 minute and 30 second etching time. And finally sub-0.2 ${\mu}$ twolevel metal interconnects using the developed processes were fabricated and the problems of multilevel interconnects are discussed.

• Toxicological Research
• /
• v.25 no.4
• /
• pp.175-180
• /
• 2009

Lead (Pb) is a ubiquitously occurring environmental heavy metal which is widely used in industry and human life. Possibly due to a global industrial expansion, recent studies have revealed the prevalent human exposure to Pb and increased risk of Pb toxicity. Once ingested by human, 95% of absorbed Pb is accumulated into erythrocytes and erythrocytes are known to be a prime target for Pb toxicity. Most of the studies were however, focused on $Pb^{2+}$ whereas the effects of $Pb^{4+}$, another major form of Pb on erythrocytes are poorly understood yet. In this study, we investigated and compared the effects of $Pb^{4+}$, $Pb^{2+}$ and other heavy metals on procoagulant activation of erythrocytes, an important factor for the participation of erythrocytes in thrombotic events in an effort to address the cardiovascular toxicity of $Pb^{4+}$. Freshly isolated erythrocytes from human were incubated with $Pb^{4+}$, $Pb^{2+}$, $Cd^{2+}$ and $Ag^+$ and the exposure of phosphatidylserine (PS), key marker for procoagulant activation was measured using flow cytometry. As a result, while $Cd^{2+}$ and $Ag^+$ did not affect PS exposure, $Pb^{4+}$ and $Pb^{2+}$ induced significantly PS exposure in a dose-dependent manner. Of a particular note, $Pb^{4+}$ induced PS exposure with a similar potency with $Pb^{2+}$. PS bearing microvesicle (MV), another important contributor to procoagulant activation was also generated by $Pb^{4+}$. These PS exposure and MV generation by $Pb^{4+}$ were well in line with the shape change of erythrocyte from normal discocytes to MV shedding echinocytes following $Pb^{4+}$ treatment. Meanwhile, nonspecific hemolysis was not observed suggesting the specificity of $Pb^{4+}$-induced PS exposure and MV generation. These results indicated that $Pb^{4+}$ could induce procoagulant activation of erythrocytes through PS exposure and MV generation, suggesting that $Pb^{4+}$ exposure might ultimately lead to increased thrombotic events.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.6-21
• /
• 2022

This paper examines the material culture of the Goryeo-Joseon Period through changes in the design and crafting of the earpick. In Chapter 2, terminology regarding earpicks is presented, and the culture of using earpicks is examined through fragmentary literature of the late Joseon Dynasty. Earpicks were first a personal hygiene tool, and, secondly, they played a symbolic role as a style accessory used by men, analogous to the fan carried by women of the time. In Chapter 3, earpick form are classified by period, and characteristic decorative techniques for each form are examined. During the Goryeo Dynasty, earpicks were sanitary tools, and, according to their form, they were classified into single and complex types. From Unified Silla to Goryeo, there is an angled type of connecting rod, and in the Goryeo period, there appeared earpicks with colorful decorations on the handle, completely forged earpicks with a thin and long shape, and earpicks which were part of multitools. Common decorative techniques include line expression, gold plating, cheophomun on the background, and inlay. Earpicks of the Joseon Dynasty are classified into sanitary tools or ornaments, according to their purpose of use. Sanitary tools are divided into single type and complex type, and earpicks used as ornaments include headdress, norigae, and sunchu. For earpick accessories, headdresses and norigae were used for women, and sunchu was used for men. The decorative techniques of earpicks during the Joseon Dynasty were mainly seen in the headdress earpicks. They were decorated with various colors in the Cloisonné method or bejeweled. Research on everyday tools among crafts is lacking; greater attempts to read the flow of time and approaches to material culture through everyday tools should be made.