• 한국기계가공학회지
• /
• 제14권6호
• /
• pp.35-40
• /
• 2015

An IP-2 type container is used for the transport of low-level radioactive materials. An IP-2 type metal container was modeled and analyzed for the dropping conditions in normal transport conditions required by NSSC Notice 2014-50, "Regulations on the packaging and transport of radioactive materials." Structural analyses were performed by finite element method, and the acceptability was reviewed by comparing the results with technical standards and maximum allowable stresses of each material. Structural members of the container were modeled as 3D solid elements, and the possible dropping directions were considered in these analyses. Results show that maximum stresses, maximum deformed gaps in the cover, and maximum estimated thickness reduction in structural members were well below the allowable limits; thus, the structural integrity of the container was confirmed.

• Journal of Pharmaceutical Investigation
• /
• 제1권1호
• /
• pp.101-108
• /
• 1971

The stability and toxicity test for p.p'-DDT, DDVP and dipterex that put to used sample in this study effects is follows A. about p.p'-DDT (1) In elevating the stability of p.p'-DDT, best stabilizing solvent was benzene. (2) The stability-agent has no difficulty as long as it not contain metal ion for instance $Z_n^{2+}$,$C_r^{3+}$,$Al^{3+}$,and $Fe^{2+or3+}$ but in case of contain $F_e^{3+}$, the combination of salicylaminoguanidine is best effective. (3) Using this product for water-suspension, We must use span 40 for stability agent and adding it at the same time. (4) We must use container which does not week alkali and metal ion but it is to preserved in tight light-resistant container. (5) The stopper of container is adapted with above-mentioned condition of container, but it is better not to use metal material. (6) This product needs opening ventilation more than 30 minutes after diffusion or spray and in the room we remove cause of remained poison by cleaning the bottom. B. about DDVP and Dipterex (1) Benzene or toluene in best solvent to preserve stability of DDVP and Dipterex. (2) Span 40 is superior for stability agent of this product and second is span 80. (3) The pH of solution is very stable in pH 5-6 and comparative stable in alkali more than p,p'-DDT. (4) Container is to preserved in tight, lightresistant container and especially be careful of outflow and inflow of water. (5) Because this product is centeral stimulant poison, we must pay attention to prevent cause of contact diadermic toxicity after use.

• 방사성폐기물학회지
• /
• 제21권3호
• /
• pp.329-345
• /
• 2023

This paper described a method for analyzing the structural performance of a metal container used for disposing radioactive waste generated during the decommissioning of a nuclear power plant, and numerical analysis results of a method for reinforcing the container. The containers to be analyzed were those that can be used in near-surface and landfill disposal facilities scheduled to be operated at the Gyeongju radioactive waste disposal facility. Structural reinforcement of the container was performed by lattice reinforcement, column reinforcement, and bottom plate reinforcement. Accordingly, a total of 14 reinforcement cases were modeled. The external force causing damage to the container was set equivalent to the impact of a 9-m fall, accounting for the height of the vault at the near-surface disposal facility. The reinforcement methods with a high contribution to the structural performance of the container were concluded to be lattice and column reinforcements.

• Bulletin of the Korean Chemical Society
• /
• 제27권2호
• /
• pp.305-308
• /
• 2006

• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.3010-3016
• /
• 2023

In recent years, the development of radioactive waste containers for nuclear facility decommissioning and dismantling is a critical issue because the Taiwan domestic boiling water reactor nuclear power plant is going to be decommissioned. The main purpose of this research is to design a metal container that meets the structural requirements of related regulations. At first, the shielding analysis was performed by varying dimensions of radioactive waste to determine the storage efficiency of the container. Then, a series of structural analyses for operational and accidental conditions of the container with full load were conducted, such as lifting, stacking, and drop impact conditions. On the other hand, the field drop impact tests were carried out to ensure structural integrity. The present research demonstrates the structural safety of the developed container for decommissioned nuclear facilities in Taiwan.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 제5회 압출 및 인발가공 심포지엄
• /
• pp.63-70
• /
• 2002

The purpose of the present study is to propose a new way of manufacturing curved metal tubes with arbitrary sections and way of eliminating the conventional bending defects such as thinning and thickening, in the wall of tube, distortion of the section, and wrinkling and folding on the surface by the extrusion bending process that can extrude and weld together one or more billets inside dies cavity, and can bend them during extrusion due to the gradient of extrusion velocities controlled by the eccentricity of the cavity sections between the entrance and the exit of the eccentric conical extrusion bending dies and conical plug, or by the relative size of the holes of multi-hole container, or by the relative moving velocity of multi-punches.

• 소성∙가공
• /
• 제3권3호
• /
• pp.359-374
• /
• 1994

Process sequence design in sheet metal forming process by the finite element method is investigated. The forming of sheet metal into a washing machine container is used to demonstrate the design of an improved process sequence which has fewer operations. The design procedure makes extensive use of the finite element method which has simulation capabilities of elastic-plastic modeling. A one-stage process to make an initial blank to the final product is simulated to obtain information on metal flow requirements. Loading simulation for a conventional method is also performed to evaluate the design criteria which are uniform thickness distribution around the finished part and maximum punch load within limit of available press capacity. The newly designed sequence has two forming operations and can achieve net-shape manufacturing, while the conventional process sequence has three forming operations. This specific case conventional process sequence has three forming operations. This specific case can be considered for application of the method and for development of the sequence design methodology in general.

• 월간포장계
• /
• 통권114호
• /
• pp.118-122
• /
• 2002

• 한국통신학회논문지
• /
• 제34권12B호
• /
• pp.1349-1358
• /
• 2009

선박 등에서의 컨테이너 적치환경은 전원공급의 한계 때문에 무선 센서 네트워크 기술이 이용된다. 이 경우 인프라 설치비용이나 어려움 때문에 많은 싱크노드 적용이 용이하지 않으므로 하나의 싱크노드에 수백에서 수천이라는 다수의 노드가 하나의 네트워크 구성에 참여하게 된다. 이런 대량의 노드들을 관리하기 위해 클러스터링 기반 Proactive 방식의 프로토콜이 적합하다. 하지만 컨테이너가 적치된 금속 장애물 환경에서는 전파의 간섭, 반사, 왜곡 등의 이유로 무선통신 환경이 불안정하다. 이에 따라 본 논문에서는 불안정한 무선통신의 신뢰성을 향상시키기 위해 기존의 변형 LEACH 프로토콜을 개선시켜 추가 변형된 LEACH 프로토콜을 제안한다. 제안 프로토콜에서는 링크 품질을 측정한 후 일정 품질 이상의 링크에만 연결설정을 하도록 구현하였다. 이를 통해 안정적인 토폴로지 형성을 유도하였으며, 기존의 프로토콜과 비교하였다. 비교 결과, 본 논문에서 제안한 프로토콜이 불안정한 무선통신 환경에서 기존의 프로토콜보다 안정적인 토폴로지를 형성함을 확인하였다.

• 방사성폐기물학회지
• /
• 제5권2호
• /
• pp.155-169
• /
• 2007

월성 원자력 발전소의 TRF 시설에서 수집된 트리튬을 metal hydride 형태로 보관하고 있는 500 kCi급 트리튬 1차 저장용기를 발전소 밖의 폐기물 저장고로 안전하게 운반하기 위하여 트리튬 운반용기를 개발하였다. B형 운반용기의 기술기준을 적용하여 구조평가, 열평가, 방사선차폐평가, 격납평가 등을 수행하여 운반용기의 안전성을 분석하였다. 트리튬 운반용기는 정상운반조건 및 사고운반조건에서도 격납 경계가 손상되지 않는다고 평가되었다. 붕괴열로 인한 운반용기 내부 저장용기의 온도상승은 수치해석 결과, 원통형 모델에서는 $134.8^{\circ}C$로 나타났다. 운반사고 조건에 대한 열 평가로서 $800^{\circ}C$ 외부환경에 30분간 노출되었을 경우에는 단열재만의 열차폐를 고려하여 계산한 결과, 약 $405^{\circ}C$로 나타났으며, 내부 온도 상승은 1차 격납 경계인 1차 저장용기의 허용 온도인 $550^{\circ}C$에도 미치지 못하였다. 격납 차폐 평가에서도 사고조건인 $800^{\circ}C$의 외부 환경에 노출된 경우에서도 충분히 운반용기의 격납 성능을 유지할 수 있다고 판단되었다. 방사선에 대한 차폐 특성을 조사한 결과, 트리튬에서 발생된 ${\beta}-ray$ 선량은 1차 저장용기 외부 표면에서 0으로 계산되었다. 이상과 같이 500 kCi 급 트리튬 운반용기에 대한 안전성을 평가한 결과, 운반사고조건에서도 트리튬 운반용기는 전혀 이상이 없는 것으로 나타났다.