• Journal of the Korean Vacuum Society
• /
• v.15 no.1
• /
• pp.64-72
• /
• 2006

We demonstrated organic light-emitting devices (OLEDs) based on the organic thin-film materials such as tris-(8-hydroxyquinoline) aluminum $(Alq_3)$. The structure of OLEDs was vacuum deposited upon transparent and thin glass substrates pre-coated with a transparent, conducting indium tin oxide thin film. The luminance characteristics, current, capacitance, and dispersion factor for degraded OLEDs, which were made by various bias currents $(0.5mA\;{\leq}\;I_{Bias}\;{\leq}9mA)$, are studied. The current dependences of lifetime were divided at approximately 2mA, and they represented nearly linear behaviors but had different slopes in a logarithmic plot of lifetime versus bias current. With lighting OLEDs, the anomaly of capacitance, as shown in the CV curve, occurred because of two factors, polarization in the bulk of organic materials and the interface between the metal and organic layers. In decayed OLEDs that had lower bias currents of less than 2mA, it was found that the degradation of luminance was related to both the decrease of polarization and to the lowering of the injection barrier.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.6
• /
• pp.561-568
• /
• 2008

STATEMENT OF PROBLEM: Currently, many implant systems are developed and divided into two types according to their joint connection: external or internal connection. Regardless of the connection type, screw loosening is the biggest problem in implant-supported restoration. PURPOSE: The purpose of this study is to assess the difference in stability of abutment screws between the external and internal hexagonal connection types under cyclic loading. MATERIAL AND METHODS: Each of the 15 samples of external implants and internal abutments were tightened to 30 N/cm with a digital torque gauge, and cemented with a hemispherical metal cap. Each unit was then mounted in a $30^{\circ}$ inclined jig. Then each group was divided into 2 sub-groups based on different periods of cyclic loading with the loading machine (30 N/ cm - 300 N/cm,14 Hz: first group $1{\times}10^6$, $5{\times}10^6$ cyclic loading; second group $3{\times}10^6$, $3{\times}10^6$ for a total cyclic loading of $6{\times}10^6$) The removal torque value of the screw before and after cyclic loading was checked. SPSS statistical software for Windows was used for statistical analysis. Group means were calculated and compared by ANOVA, independent t-test, and paired t-test with ${\alpha}$=0.05. RESULTS: In the external hexagonal connection, the difference between the removal torque value of the abutment screw before loading, the value after $1{\tims}10^6$ cyclic loading, and the value after $1{\times}10^6$, and additional $5{\times}10^6$ cyclic loading was not significant. The difference between the removal torque value after $3{\times}10^6$ cyclic loading and after $3{\times}10^6$, and additional $3{\times}10^6$ cyclic loading was not significant. In the internal hexagonal connection, the difference between the removal torque value before loading and the value after $1{\times}10^6$ cyclic loading was not significant, but the value after $1{\times}10^6$, and additional $5{\times}10^6$ cyclic loading was reduced and the difference was significant (P < .05). In addition, in the internal hexagonal connection, the difference between the removal torque value after $3{\times}10^6$ cyclic loading and the value after $3{\times}10^6$, and additional $3{\times}10^6$ cyclic loading was not significant. CONCLUSION: The external hexagonal connection was more stable than the internal hexagonal connection after $1{\times}10^6$, and additional $5{\times}10^6$ cyclic loading (t = 10.834, P < .001). There was no significant difference between the two systems after $3{\times}10^6$, and additional $3{\times}10^6$ cycles.

• Journal of Radiation Protection and Research
• /
• v.31 no.4
• /
• pp.203-210
• /
• 2006

Purpose : To estimate the dose to the embryo/fetus of a pregnant patient with brain tumors, and to design an shielding device to keep the embryo/fetus dose under acceptable levels Materials and Methods : A shielding wall with the dimension of 1.55 m height, 0.9 m width, and 30 m thickness is fabricated with 4 trolleys under the wall. It is placed between a Patient and the treatment head of a linear accelerator to attenuate the leakage radiation effectively from the treatment head, and is placed 1 cm below the lower margin of the treatment field in order to minimize the dose to a patient from the treatment head. An anti-patient scattering neck supporters with 2 cm thick Cerrobend metal is designed to minimize the scattered radiation from the treatment fields, and it is divided into 2 section. They are installed around the patient neck by attach from right and left sides. A shielding bridge for anti-room scattered radiation is utilized to place 2 sheets of 3 mm lead plates above the abdomen to setup three detectors under the lead sheets. Humanoid phantom is irradiated with the same treatment parameters, and with and without shielding devices using TLD, and ionization chambers with and without a build-up cap. Results : The dose to the embryo/fetus without shielding was 3.20, 3.21, 1.44, 0.90 cGy at off-field distances of 30, 40, 50, and 60 cm. With shielding, the dose to embryo/fetus was reduced to 0.88, 0.60, 0.35, 0.25 cGy, and the ratio of the shielding effect varied from 70% to 80%. TLD results were 1.8, 1.2, 0.8, 1.2, and 0.8 cGy. The dose measured by the survey meter was 10.9 mR/h at the patient's surface of abdomen. The dose to the embryo/fetus was estimated to be about 1 cGy during the entire treatment. Conclusion : According to the AAPM Report No 50 regarding the dose limit of the embryo/fetus during the pregnancy, the dose to the embryo/fetus with little risk is less than 5 cGy. Our measurements satisfy the recommended values. Our shielding technique was proven to be acceptable.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1976.06a
• /
• pp.87.4-88
• /
• 1976

The statistcal study was done on 81 cases of the foreign bodies in the food passages (73 cases) and air passages (8 cases), who had visited the Dept. of Otolaryngology of Kyung Hee Medical Center and treated endoscopically, from Nov. 1971 to Mar 1976. The results were as follows, 1) The incidence of esophageal foreign bodies (73 cases) in order of frequency was coin (61 cases; 83.6%), bone (6 cases; 8.2%), food particles (3 cases; 4.1%), discs (2 cases), and other metals (l case). The incidence of foreign bodies in the air passages (8 cases) was food particles (3 cases; 37.5%), pointed metal (2 cases; 25%), plastic pencil cap (l case), plastic ring (1 case), and wood piece (1 case) in order. 2) In sex distribution, 51 cases (62.9%) were males and 30 cases (37.1%) were females, and the ratio between males and females was about 1.7 : 1.3. In the age incidence, 69 cases (82.5%) of all foreign bodies were under 5 years of age, and especially, coin cases were 59 cases (96.7%) and the highest was 8 years of age, lowest was 11 months of age. 7 cases (87.5%) of all airway foreign bodies were under 10 years of age. 4) The ratio between the food passages(73 cases) and the air passages (8 cases) was about 9 : 1. In the location of the foreign bodies of the food passages, 66 cases (90.4%) were in the first esophageal narrowing, 5 cases (6.9%) in the second narrowing, and 2 cases (2.7%) in the third narrowing. In the air passages, the frequent sites were trachea (5 cases; 62.5%), larynx (2 cases), and bronchus (1 case) in order. 5) In duration of lodgement, 63 cases (86. 3%) of esophageal foreign bodies were removed within 24 hours, and one case was removed within 16 days. The number of cases lodged within 24 hours were 4 cases (50%). in the air passages and one case was removed within 18 days. 6) In treatment, 37 cases (50.7%) of esophageal foreign bodies were extracted by modified upper esophagoscopy, 33 cases (42.5%) by esophagoscopy under the local anesthesia, 3 cases (4.1%) by esophagoscopy under the general anesthesia. 8 cases of the coin cases were passed into the stomach during the endoscopic examination. Laryngeal foreign bodies (2 cases; 25%) were extracted by laryngoscopy under the local anesthesia. 2 cases (40%) of tracheal foreign bodies by Bronchoscopy with tracheotomy under the local anesthesia, 3 cases (60%) by Bronchoscopy under the general anesthesia, and bronchial foreign body (1 case) by open thoracotomy under the general anesthesia, at the Dept. of Chest surgery.