• Journal of Korean Society of Forest Science
• /
• v.85 no.2
• /
• pp.329-339
• /
• 1996

This study is to investigate the effect of mycorrhizal development, growth, nutrient absorption of P. thunbergii seedlings inoculated with Pisolithus tinctorius(Pt. KJ-1) in relation to toxic materials in soil. The concentrations on copper solution applied to the soils were 0, 40, 120, 260, 430ppm. The results are summarized as follows : 1. The germination of P. thunbergii with Pt. increased greater than without ectomycorrhizal fungi. Mycorrhizal development showed a significant decreasing trend at high concentration, and tolerant Cu test with Pt. in agar plate media showed a decreasing trend at a high level. 2. P. thunbergii seedlings inoculated with Pt. showed that the shoot length was significantly promoted at 40, 120ppm copper levels, and that of noninoculated seedlings had the lowest effect in 430ppm copper level. 3. The outer shape of ectomycorrhizal root tips after inoculating Pt. on P. thunbergii seedlings appeared as a monopodial type, a fern-like type, and a cluster-like type at 0ppm, 40ppm levels, but only monopodial type came out at 260ppm, 430ppm copper levels. 4. Root length, no. of juvenile leaves, total length of juvenile leaves, total dry weight, no. of needles and total length of needles of P. thunbergii with Pt. increased greater than those of noninoculated seedling. Growth response of P. thunbergii seedling inoculated with Pt. increased significantly at 40ppm, 120ppm Cu levels. 5. As a result of analysis of growth medium, pH, Na, CEC increased at higher Cu level, and total nitrogen, organic matters, available phosphorous, K, Ca and Mg decreased at 40ppm, 120ppm Cu levels. As a result of an analysis about a copper within soils, it appeared having high Cu-concentration at 0ppm level of an inoculated Pt. and high Cu-concentration in noninoculated Pt. than in inoculated Pt. at higher level. 6. As a result of an analysis of shoot, N, P, and K-concentration were higher in noninoculated seedlings than in inoculated seedlings, and Cu-concentration was higher in inoculated seedlings than in noninoculated seedlings. The analysis of root resulted in a high N-concentration at 40ppm, 120ppm levels, in a high P-concentration in inoculated seedlings and in a high Cu-concentration in noninoculated seedlings. Cu-concentration was significantly higher at root than at shoot.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.2
• /
• pp.39-44
• /
• 2020

Recently, numerous researches are being conducted in flexible substrate to apply to wearable devices. Particularly, Conductive substrate researches that can implement the wearable devices on clothing are massive. In this study, we formed fiber substrate spraying CNT and Pd mixed solution on it and plated metal layer with electroless plating. Used SEM equipment and EDS analysis to analysis structure of the plated fiber substrate and discovered Ni layer was created. For check electrical properties, mapping was performed to check surface resistance and distribution of resistance of electroless plated fiber substrate with 4-point probe. It was confirmed that conductivity was improved as the duration of electroless plating was increased, and it was found that distribution of resistance by surface location was uniform. Changes in resistance due to mechanical stress were measured through tensile, bending, and twisting tests. As a result, it was confirmed that resistance change of flexible substrate gradually disappeared as plating time increased. Using UTM (Universal testing machine), it was analyzed mechanical properties of the electroless plated substrate with respect to changes in plating time were improved. In the case of conductive fiber substrate in which electroless plating was performed for 2 hours, tensile strength was increased by 16 MPa than fiber substrate. Based on these results, we found that Ni-CNT-Fabric flexible substrate is adequate for clothing-intergrated conductive substrate and we positively expect that this experiment shows flexible substrate can adapt to and develop not only a wearable device technology but also other fields needing flexibility such as battery, catalyst and solar cell.

• Food Science and Preservation
• /
• v.21 no.2
• /
• pp.276-285
• /
• 2014

The purpose of this study was to develop a new fermented product (named as Cheonggeumjang) using Sigumjang, Cheonggukjang and Oak mushroom. This study was conducted to evaluate the effects of Sigumjang, Cheonggukjang, and Cheonggeumjang, which were mixed in a different ratio as A (Sigumjang: Cheonggukjang = 1:2), B (Sigumjang: Cheonggukjang = 1:1) and C (Sigumjang: Cheonggukjang = 2 : 1). Then, the functions and physicochemical properties of products were investigated. We found that the crude protein content in Cheonggeumjang was higher than in Sigumjang whereas fat and calories content was less than that of Cheonggukjang. Free sugar content in Cheonggeumjang C 5.8681 g/100g was the highest. Moroever, Cheonggeumjang C and Sigumjang has an antioxidant activities. The electron donating capacity, SOD like activity and the inhibitory effect on xanthine oxidase of these two were significantly high than other group. Fat rancidity is promoted in the presence of metal ion, Cheonggeumjang group has higher inhibitory effect on $Fe^{2+}$ion than on $Cu^{2+}$ ion. The rancidity of fat is also increased by reactive oxygens species, Cheonggeumjang group inhibited $H_2O_2$ in higher extent than $KO_2$. Also, ${\alpha}$-glucosidase inhibition activity of Cheonggeumjang C in all of the concentrations (300 ppm, 500 ppm and 700 ppm) is higher than other groups. In sensory evaluation, Cheonggeumjang C groups is ranked significantly higher than the other groups while considering color, flavor, taste and the overall acceptability. Taken together, the results of this study suggest that Cheonggeumjang is best ingredient for increasing the consumer acceptability and functionality.

• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.947-953
• /
• 2005

Previous test results showed that the current ASTM(American Standard for Testing and Materials) grip adapter for GFRP(Glass Fiber Reinforced Polymer) rebar was not fully successful in developing the design tensile strength of GFRP rebars with reasonable accuracy. It is because the current ASTM grip adapter which is composed of a pair of rectangular metal blocks of which inner faces are grooved along the longitudinal direction does not take into account the various geometric characteristics of GFRP rebar such as surface treatment, shape of bar cross section as well as physical characteristics such as poisson effect, elastic modulus in the transverse direction and so on. The objective of this paper is to provide how to proportion the optimum diameter of inner groove in ASTM grip adapter to develop design tensile strength of GFRP rebar. The proportioning of inner groove in ASTM grip adapter is based on the force equilibrium of GFRP rebar between tensile capacity and minimum frictional resistance required along the grip adapter. The frictional resistance of grip adapter is calculated based on the compressive strain compatibility in radial direction induced by the difference between diameter of GFRP rebar and inner groove In ASTM grip. All testing procedures were made according to the CSA S806-02 recommendations. From the preliminary test results on round-type GFRP rebars, it was found that maximum tensile loads acquired under the same testing conditions is highly affected by the diameter of inner groove in ASTM grip adapter. The grip adapter with specific dimension proportioned by proposed method recorded the highest tensile strength among them.

• Journal of Technologic Dentistry
• /
• v.33 no.1
• /
• pp.93-102
• /
• 2011

Purpose: The study aimed to evaluate working environment for dental technician by measuring dust level, ventilation conditions and the use of personal protective equipment and to provide basic information required to improve working environment and develop health education programs for dental technician. Methods: A total of 240 dental technician who are registered with the Daegu Association of Dental technician and working at 34 dental laboratories participated in the study. And the dust level was measured at 21 different spots in 16 dental laboratories out of 34. Results: Of 34 dental laboratories, 31 (91.2%) were equipped with a ventilator, but the remaining 3 (8.8%) did not have a ventilator. By the number of ventilator, 1 to 3 ventilators were found in 22 dental laboratories (71.0%), 4 to 6 ventilators were in 7 laboratories (22.5%) and more than 7 ventilators in 2 laboratories(6.5%). According to the frequence of changing filters in dust collector, 20 dental laboratories (58.9%) changed filters every four weeks, 10 laboratories (29.4%) changed them every six weeks and 4 laboratories (11.7%) changed them every eight weeks. Of total respondents, 114 (61.3%) said they wore a mask all the time while working, 56 (29.6%) said they frequently wore a mask, 19 (10.1%) said they did not wear a mask. As for the type of masks, 159 (84.1%) used a disposable mask, 25 (13.2%) used a cotton mask and 5 (2.7%) used an anti-dust mask. For dust sat on their outfits while working, 102 (54.0%) shook their uniforms inside workplace to keep dust off the uniforms, 64 (33.9%) did not anything until they wash their uniforms and 23 (12.1%) shook their uniforms outside workplace to keep dust off the uniforms. Of total respondents, 182 (96.3%) had a particle in their eyes while carrying out grinding work. Based on the measurement of floating dust at workplace, 3 dental laboratories showed dust concentration exceeding the minimum level of 10 mg/$m^3$ allowed under the permit for environment. Of those, 1 laboratory had the dust concentration that was more than 1.5 times higher than the minimum level. Dust concentration was higher in laboratories that used a dust collector with 0.5 horse power and changed filters more than 3 weeks ago. Dust comprised of nickel (more than 70%), chrome (9%) and others. The mean chrome concentration was more than twice higher than the minimum permissible level of 0.5 mg/$m^3$. There were two laboratories that showed chrome concentration exceeding the level of 0.4 mg/$m^3$. Like dust concentration, chrome level was higher in laboratories that used a dust collector with 0.5 horse power and changed filters more than 3 weeks ago. There were six laboratories that had nickel concentration exceeding the minimum permissible level of 1 mg/$m^3$. Of those, one laboratory had nickel concentration that was more than three times higher than the minimum permissible level. Nickel concentration was also higher in laboratories that used a dust collector with 0.5 horse power and changed filters more than 3 weeks ago. Conclusion: It is not likely that heavy metal concentrations found in the study constitute respiratory dust. It is however necessary for health of dental technician to apply the Industrial Safety and Healthy Law to dental laboratories and make recommendations for the use of personal protective equipment, installation of a proper number of ventilators, more frequent change of filters in dust collector and improved ventilation for polishing work. At the same time, dental technician need education on how to use personal protective equipment and how to efficiently remove dust from their uniforms.

• Journal of the Korean Electrochemical Society
• /
• v.18 no.3
• /
• pp.121-129
• /
• 2015

The platinum anode for the electrolytic reduction process is generally surrounded by a nonporous ceramic shroud with an open bottom to offer a path for $O_2$ gas produced on the anode surface and prevent the corrosion of the electrolytic reducer. However, the $O^{2-}$ ions generated from the cathode are transported only in a limited fashion through the open bottom of the anode shroud because the nonporous shroud hinders the transport of the $O^{2-}$ ions to the anode surface, which leads to a decrease in the current density and an increase in the operation time of the process. In the present study, we demonstrate the electrolytic reduction of 1 kg-uranium oxide ($UO_2$) using the porous shroud to investigate its long-term stability. The $UO_2$ with the size of 1~4mm and the density of $10.30{\sim}10.41g/cm^3$ was used for the cathode. The platinum and 5-layer STS mesh were used for the anode and its shroud, respectively. After the termination of the electrolytic reduction run in 1.5 wt.% $Li_2O-LiCl$ molten salt, it was revealed that the U metal was successfully converted from the $UO_2$ and the anode and its shroud were used without any significant damage.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.2
• /
• pp.116-122
• /
• 2010

A $Cu_3Si$ film electrode is obtained by Si deposition on a Cu foil using DC magnetron sputtering, which is followed by annealing at $800^{\circ}C$ for 10 h. The Si component in $Cu_3Si$ is inactive for lithiation at ambient temperature. The linear sweep thermammetry (LSTA) and galvano-static charge/discharge cycling, however, consistently illustrate that $Cu_3Si$ becomes active for the conversion-type lithiation reaction at elevated temperatures (> $85^{\circ}C$). The $Cu_3Si$ electrode that is short-circuited with Li metal for one week is converted to a mixture of $Li_{21}Si_5$ and metallic Cu, implying that the Li-Si alloy phase generated at 0.0 V (vs. Li/$Li^+$) at the quasi-equilibrium condition is the most Li-rich $Li_{21}Si_5$. However, the lithiation is not extended to this phase in the constant-current charging (transient or dynamic condition). Upon de-lithiation, the metallic Cu and Si react to be restored back to $Cu_3Si$. The $Cu_3Si$ electrode shows a better cycle performance than an amorphous Si electrode at $120^{\circ}C$, which can be ascribed to the favorable roles provided by the Cu component in $Cu_3Si$. The inactive element (Cu) plays as a buffer against the volume change of Si component, which can minimize the electrode failure by suppressing the detachment of Si from the Cu substrate.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.6
• /
• pp.421-425
• /
• 2012

Purpose: The aim of this study is to compare the soft tissue changes of the midfacial area at the repose position and the natural smiling position for the improvement of evaluation and planning in the orthognathic surgery. Methods: The total of 30 subjects, 15 male and 15 female, were included in this study. The metal point landmarks were placed at the cheek, orbital rim, subpupil, and nasal base. The movements of the landmarks were evaluated at the repose position and smiling position in the lateral and posteroanterior cephalograms. Paired t test and correlation analysis were used for the evaluation of the soft tissue changes statistically. Results: In the lateral cephalograms, the cheek point (4.49 mm in female, 4.87 mm in male) showed the most distant movement. All points presented significant movements, except the orbital rim and nasal base point in male. Cheek point presented significant positive correlation between the horizontal and vertical change in male. Subpupil point presented significant positive correlation between horizontal and vertical change in both male and female. In the posteroanterior cephalograms, the nasal base point (5.41 mm in female, 6.30 mm in male) showed the most distant movement. Subpupil point and nasal base point presented significant movements in both female and male. Nasal base point presented significant negative correlation between the horizontal and vertical change in both male and female. In the lateral and posteroanterior cephalograms, the positional changes of all points presented significant positive correlation with each other in both female and male. Conclusion: The cheek point in the sagittal view and the nasal base point in the frontal view showed the most distant movement on smile. In the sagittal view, the subpupil point and cheek point moved anteriorsuperiorly on smile. In the frontal view, the nasal base points moved laterosuperiorly on smile. In both the sagittal and frontal view, the positional changes of all point were highly correlated to each other. These results may be used in the soft tissue references for the treatment planning of the dentofacial deformity patients.

• Journal of Oral Medicine and Pain
• /
• v.30 no.2
• /
• pp.215-230
• /
• 2005

The study was intended to investigate how dentists in private dental clinic thought on the present claim and review of dental insurance to reflect it in future establishing dental insurance policies. 1,465 dentists who were running own dental clinic in Pusan Metropolitan City and the south part of Kyungsang province were surveyed in February, 2004. A total of 406 copies of finished questionnaire were finally retrieved and analyzed. The findings are as follows. 1. About insurance claim affairs : Most of the subject of insurance claim was by dentist himself or dental hygienist(nurse). Agency claiming was carried under 20% of total insurance claim. 2. The degree of attendance on insurance lecture : The degree of attendance on insurance lecture was relatively low. 3. Filing a protest against insurance claim : Filing a protest against insurance claim was reavealed about half-and-half for "have been" or "have not been". 4. Private clinic dentist,s opinion about the regulations affecting review of dental insurance : Private clinic dentists opinion about current guide for insurance review of dental fee was“the guidance is difficult and unfair cutback of claim fee may be carried”. 5. The affairs about health insurance review agency : About 70% of private clinic dentists have dissatisfaction on health insurance review agency. 6. Standpoint of private clinic dentists about issuance of receipt for dental fee : About 70% of private clinic dentist have an difficulty in issuance of receipt for dental fee. 7. The affairs about change insurance noncoverage treatment to insurance coverage treatment : Most of private clinic dentists hoped that insurance coverage about full mouth scaling, pit and fissure sealant, fluoride application. But they do not hoped that insurance coverage about geriatric denture, prothodontic treatment except precious metal, photopolymerization resin treatment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.2
• /
• pp.158-175
• /
• 2005

Statement of problem. Every effort has been continually made to obtain objectivity in measuring the longevity of fixed restorations, such as by establishing unified judgement standard for deciding success and adopting statistical method that analyzes the data of successful and failed cases at the same time. In Korea, however desired level of development has not to be made in this field yet. Purpose. This study, adopting California Dental Association (CDA) quality evaluation system, established objective standard for deciding success, and inferred the longevity of fixed restorations and their failure analysis through adopting Kaplan-Meier survival analysis. Material and method. In order to assess the longevity of flxed restorations serviced in Korea and causes of failure, a total of 1109 individuals (aged 15-74, 716 women and 393 men loaded with 2551 unit fixed restorations, and 1934 abutments) who lived in Kyung-In Province were examined and the findings were as follows : Results. 1. Length of service of fixed restorations serviced in Korea was 6.86$\pm$0.15 yr (mean), 5.5 yr (median), and the rate of success was 65.82% in 5 year survival, and 21.15% in 10 year survival. 2. When there was patient's need for replacing old prosthetics, longevity of fixed restorations was 7.51$\pm$0.27 yr (mean), 7 yr (median), and the rate of success was 61.08% in 5 year survival, and 17.57% in 10 year survival. 3. Longevity of fixed restorations was longest in the over-sixty age group(9.21$\pm$0.66) and that of the teen age group(3.39$\pm$0.28) was shortest (p<0.05). 4. Longevity of fixed restorations of women (7.38$\pm$0.18 years) was longer than that of men (6.00$\pm$0.26) (p<0.05). 5. As for the provider factor (such as unlicensed performers, university hospitals, and private clinic), there was no statistically significant difference in longevity of fixed restorations. 6. Defective margin (34.78%). periodontal disease (12.15%), periapical involvement (11.73%), was the most frequent causes of failure and poor esthetics group showed the longest life above all (p<0.05). Actual frequent causes of failure after removing old prosthetics were defective margin, periapical involvement, periodontal disease and uncemented restoration. In 75.67% of the cases, abutment state after removing old prosthetics was good enough for loading another prosthetics. 7. There was found to have statistically significant influence between longevity of single crown (6.35$\pm$0.20 yr) and that of 3 unit fixed restorations (7.60$\pm$0.30 y) (p<0.05). In each case the most frequent cause of failure was defective margin. 8. The number of cantilever pontic, pontic/abutment ratio, oral hygiene status were found to have no statistically significant influence on longevity of fixed restorations in all groups (p>0.05). 9. Longevity of fixed restorations made of non precious metal was longest (9.60$\pm$0.40 yr) semi precious and precious trailing behind(p<0.05). 10. Group function group (37.04%) and partial group function group (44.62%) were predominant in frequency but showed no correlation between them and among different types of occlusal plane and different types of occlusal surface (p>0.05). 11. Longevity of fixed restorations was longest in the centric interference group(9.35$\pm$0.62) (p<0.05) among different types of occlusal interference. Conclusion. We found that longevity of fixed restorations serviced in Korea is affected by age, gender and type of material, and that most frequent cause of failure is defective margin. In order to assess the accurate longevity of axed restorations, unified research design. overcoming inter-observer difference and establishing the objective research items are needed. Furthermore, it is thought that prospective approach through thorough study and regular follow-ups is needed just from the start of research. Nationwide detailed studies on length of service of fixed restorations manufactured in Korea are hoped to be conducted hereafter.