• 통상정보연구
• /
• 제12권4호
• /
• pp.405-427
• /
• 2010

This legal study is to compare the Electronic Transactions Act in Thailand(hereinafter 'ETA') with mainly other countries electronic transactions acts, such as UNCITRAL MLEC, UECIC, VETA, UCITA and Korea' Electronic Transactions Act The ETA is consisted of 6 chapters which included preamble and definitions. Each chapter's main point as follows. Preamble is related to the name, time of legal effect, scope and definitions. Chapter 1 is not only general principles of electronic transactions, required restriction in addition to specify the limit of application, documentation, evidential weight in reference to the data message, but also the conditions of offer and acceptance through data message, time and place of dispatch and receipt of data message, certification between origination and addressee. According to media-neutrality and the effectiveness security requirement of data message under the information system, legal certification is related to the exchange's declaration of intention, define about origination-addressee of data message. Chapter 2 is composed to provide expressly about the effectiveness security in electronic signature. Those contents are to compare the MLEC, UECIC and Electronic Transactions Act in Korea. Chapter 3 is related to legal definitions that present legal requirement about service relating electronic transaction which contents accept domestic law, the adequate requirement as eligibility, satisfied matter, self-reliance ratio of finance and other detail standard Chapter 4 is deal with the transaction which are public sector and those application requirements. And also this chapter are composed regulations about direct-indirect purpose of Thailand domestic electronic government.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2296-2300
• /
• 2005

This paper deals with the real-time message network system by a CAN (controller area network) based on the real-time distributed control scheme to integrate actuators and sensors in a humanoid robot. In order to apply the real-time distributed processing for a humanoid robot, each control unit should have the real-time efficient control method, fast sensing method, fast calculation and real-time valid data exchange method. Moreover, the data from sensors and encoders must be transmitted to the higher level of control units in maximum time limit. This paper describes the real-time message network system design and the performance of the system.

• Journal of information and communication convergence engineering
• /
• 제14권4호
• /
• pp.233-239
• /
• 2016

A remote control system (RCS) can monitor a user's confidential information by using the broadcast receivers in Android OS. However, the current RCS detection methods are based only on a virus vaccine. Therefore, if the user's smartphone is infected by a brand new RCS, these methods cannot detect this new RCS immediately. In this paper, we present a secure message transmission medium. This medium is completely isolated from networks and can communicate securely through a QR code channel by using symmetric key cryptography such as the AES block cipher and public key cryptography such as elliptic curve cryptography for providing security. Therefore, the RCS cannot detect any confidential information. This approach is completely immune to any RCS attacks. Furthermore, we present a secure QR code-based key exchange protocol by using the elliptic curve Diffie-Hellman method and message transmission protocols; the proposed protocol has high usability and is very secure.

• Journal of information and communication convergence engineering
• /
• 제19권1호
• /
• pp.16-21
• /
• 2021

In this paper, to prevent accidents of school vehicles used by students, which have emerged as a continuous social problem, a boarding and leaving notification system using Bluetooth beacons is proposed. The platform structure uses Bluetooth, a smartphone, and an application, and provides real-time message reception between parents and teachers. It is not simply a system with Bluetooth capability alone, but also an IcT technology that is closely related to real life using two-way communication. The purpose is to provide user-friendly ICT technology as an integrated system for more practical effects. Two-way exchange of information between parents and teachers using cloud servers is made possible. By using this Bluetooth beacon notification system, safety accidents in student vehicles are reduced, which brings confidence from traffic accidents to schoolchildren of parents and teachers. Therefore, it is expected that parents and teachers are expected to improve their mental stability and quality of life from traffic accidents.

• 소프트웨어공학소사이어티 논문지
• /
• 제25권2호
• /
• pp.35-47
• /
• 2012

Variable Message Format(VMF)는 제한된 대역폭을 가지는 통신 환경에서 전술 정보를 효율적으로 교환하기 위하여 개발된 통신 메시지 표준으로, 지시자의 사용을 통해 단지 요구된 정보만을 전송할 수 있도록 메시지 길이 및 구조를 가변적으로 정의할 수 있도록 설계되었다. 그러나 이러한 가변성은 메시지를 효과적으로 분석하고 그 의미를 추출하는 것을 어렵게 할 뿐만 아니라, 메시지의 추가나 변경 시에 메시지 처리와 관련된 소프트웨어를 매번 수정하고, 이를 사용하는 모든 기기에 다시 배포해야 하는 번거로움이 있다. 본 논문에서는 국제 표준의 정형 기법인 ASN.1을 이용하여 VMF 메시지를 표현하는 체계적인 방법을 제안한다. 비트열 형태의 VMF메시지를 구조적인 ASN.1 자료 구조로 표현함으로써 프로토콜 설계자는 고 수준에서 메시지의 구조와 그 값을 다룰 수 있으며, ASN.1을 지원하는 다양한 도구들을 사용할 수 있다. 제안하는 방법은 VMF 메시지 세그먼트들에 대해 템플릿을 정의하고, 이를 조합하여 다양한 VMF 메시지를 표현한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권2호
• /
• pp.727-746
• /
• 2018

The hash function RIPEMD-160 is a worldwide ISO/IEC standard and the hash function HAS-160 is the Korean hash standard and is widely used in Korea. On the basis of differential meet-in-the-middle attack and biclique technique, a preimage attack on 34-step RIPEMD-160 with message padding and a pseudo-preimage attack on 71-step HAS-160 without message padding are proposed. The former is the first preimage attack from the first step, the latter increases the best pseudo-preimage attack from the first step by 5 steps. Furthermore, we locate the linear spaces in another message words and exchange the bicliques construction process and the mask vector search process. A preimage attack on 35-step RIPEMD-160 and a preimage attack on 71-step HAS-160 are presented. Both of the attacks are from the intermediate step and satisfy the message padding. They improve the best preimage attacks from the intermediate step on step-reduced RIPEMD-160 and HAS-160 by 4 and 3 steps respectively. As far as we know, they are the best preimage and pseudo-preimage attacks on step-reduced RIPEMD-160 and HAS-160 respectively in terms of number of steps.

• 한국정보컨버전스학회논문지
• /
• 제1권1호
• /
• pp.1-8
• /
• 2008

JXTA는 중앙 서버를 통한 관리가 필요 없고 네트워크에 연결되어 있다면 어떤 장치든 다른 장치들과의 통신이 가능하며, 이기종 P2P시스템들과의 통신이 가능하다는 특징들이 가지고 있다. 이러한 특징을 최대한 활용하면서 서로 상이한 프로토콜과 API를 사용하여 만들어진 P2P시스템간의 상호연동을 가능하도록 하기 위한 데이터 교환 시스템을 설계하였으며, 설계된 시스템의 중요한 모듈은 생성된 요청과 요청에 대한 응답을 파싱하는데 이용하는 XML Parser Component(XPC), 적절한 요청과 응답을 생성해 내는데 사용하는 XML Making Component(XMC)의 구조를 설명한다.

• 디지털산업정보학회논문지
• /
• 제15권1호
• /
• pp.21-28
• /
• 2019

Internet of Things(IoT) is a technology or environment that collects data by attaching sensors to objects and transmits the collected information to each other through wired / wireless communication in real time. It is expected that when the Internet of objects is activated, many objects can identify and recognize each other by themselves and provide various services to facilitate our lives through mutual information exchange. In addition, the internet market for things is growing rapidly each year, and various IT technologies are expected to converge. In the Internet environment of objects, data exchange technology between object devices, that is, message protocol, is classified as one of important technologies. In this paper, we examine various lightweight message protocols suitable for the Internet environment of objects, and compare the reliability of the CoAP protocol structure with the MQTT protocol for a limited environment. Finally, we confirm the reliability of TCP / TLS and WebSockets-based CoAP transmission protocol of IETF's CoRE WG that can use various transport layers other than UDP in Internet environment including cloud infrastructure.

• 한국CDE학회논문집
• /
• 제8권3호
• /
• pp.141-149
• /
• 2003

The ship STEP is an international standard for the computer-interpretable representation of ship product information and for the exchange of ship product model data. The ship STEP consists of several APs(Application Protocol), such as AP215(ship arrangement), AP216(ship moulded form), AP218(ship structures), AP226(ship mechanical systems), and AP234(operating logs, records, message). The STEP AP216(ISO 10303) are an application protocol for the exchange of ship arrangement and ship moulded forms. The AP216 specifies the geometric shape and the hydrostatic properties of the ship moulded form. This paper introduces the state-of-the-art of ship STEP AP216 and develops the test case for the validation of data structure of AP216.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권1호
• /
• pp.71-81
• /
• 2016

An EVSE and the EV exchange XML formatted communication messages with each other, whose structure is described by the V2G CI schema in the ISO/IEC 15118 international standard, and the EVSE and the power grid exchange messages based on SCL file with each other, whose structure is described by SCL schema in the IEC 61850 international standard. Because XML files can be restructured by XSLT, V2G messages can be transformed to/from SCL files using XSLT. In this study, the two schemas are analyzed and compared in order for the restructuring of the two differently structured XML instances. As a result, two XSL scripts can be produced for the transformation between XML files conforming ISO/IEC 15118 V2G CI schema and IEC 61850 SCL schema respectively to avoid manual data mapping which can happen in every application development cases.