• 대한치과교정학회지
• /
• 제26권1호
• /
• pp.105-111
• /
• 1996

임상교정에서의 원활한 치아배열을 도모하기 위하여 진단과 치료계획의 수립 방향에 따라 제1소구치 혹은 제2소구치 발치 또는 제2대구치 발치 또는 비발치로 치료가 진행된다. 이때 나타나는 하악제3대구치의 위치적 변화 특히 근원심, 협설측 경사도의 변화도를 알아보고자 163명의 교정환자 (비발치군 77례, 제1소구치 발거군 78례, 제2대구치 발거군 8례)의 치료전후 Pantomogram상을 분석하였다. 결과적으로 하악 제2대구치 발거군에서 치료전후 근원심 경사도의 변화가 컸으며, 하악 제3대구치의 초기 근심 경사도는 치료 전후의 근심경사도와 높은 상관성을 보였으며, 치료전 후의 근심경사도 변화량과도 높은 상관성을 보였다. 비발치군과 제1소구치 발거군에서 치료전후의 협설경사도 변화의 차이가 인정되었다. 치료전후의 협설경사도 변화는 치료전의 협설 경사도, 치료후의 협설경사도, 치료후의 근심경사도, 치료전후의 근심경사도 변화량과 높은 상관성을 보였다.

• The Journal of Advanced Prosthodontics
• /
• 제8권2호
• /
• pp.125-130
• /
• 2016

PURPOSE. The purpose of this study was to determine the effect of changes in the horizontal plane angle on the mesiodistal width ratios of the maxillary anterior teeth during the acquisition of frontal view photographs, derive these ratios for Korean adults on the basis of the data obtained, and analyze them using the Golden Proportion as a reference. MATERIALS AND METHODS. In experiment I, 30 plaster casts were mounted on an articulator and positioned on the angle-measuring device with a center setting of $0^{\circ}$. The device was rotated to $10^{\circ}$ in $1^{\circ}$ increments in a counterclockwise direction. At each angle, photographs were obtained and analyzed. Experiment II was based on 60 patients who visited the Department of Prosthodontics at Kyungpook National University Dental Hospital from February 2012 to February 2015. The patients were divided into three groups [Male (M), Female (F), Total (M + F)]. Frontal views were obtained for all groups and analyzed. RESULTS. From $1^{\circ}$ to $10^{\circ}$, the relative mesiodistal width ratios for the maxillary anterior teeth showed no significant differences from those at $0^{\circ}$. In all three groups, the relative width ratio of the maxillary central incisor was smaller than that specified in the Golden Proportion; the opposite was true for the canine. CONCLUSION. Our results suggest that the mesiodistal width ratios of the maxillary anterior teeth do not follow the Golden Proportion in Korean adults, and that a change in the horizontal plane angle from $1^{\circ}$ to $10^{\circ}$ during frontal photography does not affect these ratios.

• 대한치과기공학회지
• /
• 제19권1호
• /
• pp.121-130
• /
• 1997

This study was aimed to help the construction of naturally dental prosthesis by investigation of the factors affecting on the attrition position and attrition angle of maxillary canines. Therefore 163 complete cast of maxillary and mandibular extracted from the student of K. college were subjected for this study, and result through the study are as follows. 1. None attrite rate of the maxillary canine was 7%, of examined teeth. 2. Throughout mesiodistal attrition of 1) Throughout mesiodistal attrition area of the maxillary canines showed that mesial area and mid area of cusp was more frequence in attrition than distal area of it. 2) Sex, dental arch type, vertical overlap, horizontal overlap, did not affect significantly to throughtout mesiodistal attrition statistically 3. Througout labiolingual attrition area 1) Throughout labiolingual attrition area of the maxillary canines showed that attrition of the from lingual to labioncisal edge was more frequence than it of linguoincisal edge 2) It showed that attrition of the from lingual to labioincisal edge was more frequence when the length of horizontal overlap is shorter, by horizontal overlap 3) The attrition of the from lingual to labioincisal edge in maxillary left canines showed that male was more frequence in attrition than female. 4) Dental arch type, vertical overlap, did not affect signioficantly to labiolingual attrition, statistically. 4. Attrition angle 1) It showed that average attrition angle of the maxillary right canines were $19{\pm}11.02$ dagree, and it of left canines were $18{\pm}11.83$ degree. 2) It showed that famale have a bigger attrition angle than male, by sex. 3) It showed that attrition angle was bigger when the length of horizontal ovelap is bigger, by horizontal overlap.

• 대한치과교정학회지
• /
• 제23권3호
• /
• pp.391-403
• /
• 1993

For the purpose of investigating mesiodistal axial inclination of posterior teeth in normal occlusion group, open bite and deep bite group and investigating the correlationship between the axial inclination of posterior teeth and overbite of anterior teeth, a cephalometric study was performed on the subjects consisted of normal occlusion group(40), open bite group(71 : Angle's Class I, Class II, division 1 25, Class III 25) and deep bite group(64 : Angle's Class I 23, Class II, division 1 21, Class III 20). Mesiodistal axial inclination of posterior teeth to occlusal, mandibular and palatal plane were measured. The findings of this study were as follows : 1. Upper and lower posterior teeth were more mesially inclined to occlusal plane in open bite group than in deep bite group. 2. Lower posterior teeth were more mesially inclined in deep bite group than in open bite group in Angle's Class II, division 1 malocclusion but there were no significant differences in Angle's Class I and Class III malocclusion. 3. There was no significant correlationship between the axial inclination of posterior teeth to each plane and overbite of anterior teeth in open bite group. 4. There was a significant correlationship between the axial inclination of upeer and lower second premolar to occlusal plane and overbite of anterior teeth in Angle's Class I, Class II, division 1 and Class III malocclusion.

• Imaging Science in Dentistry
• /
• 제35권1호
• /
• pp.25-31
• /
• 2005

Purpose : To evaluate the stability of the segmental occlusal plane and anatomical line as the reference line for measuring the mesiodistal tooth angulation in panoramic radiography and to determine the mean angle and the range of the mesiodistal tooth angulation in Korean population with normal occlusions. Materials and Methods : Twenty nine subjects (15 men, 14 women) with normal occlusion were selected. A total of 29 panoramic radiograms were taken at normal head position and then 10 images of 5 subjects selected were repeatedly taken with repositioning 2 times at each of the head down (V-shaped occlusion) and up (horizontal occlusion) for evaluation of stability of adopted reference lines by using PM2002CC (Planmeca, Finland). The images were traced with adoption of two test reference lines and the long axes of the teeth. The mesial angles formed by each reference line and the long axes of the teeth were measured and analyzed. Results : With anatomical reference line, the mesiodistal tooth angulations of the molars showed the significant difference by over 5 degree between the normal and each changed head position. With segmented occlusal reference line, deviations of mesiodistal tooth angulations by the two changed head positions were less than 1 degree. The means, standard deviations, and maximum and minimum values of mesiodistal tooth angulations to segmental occlusal reference line on panoramic radiography were determined. Conclusion : It would appear that mesiodistal tooth angulations to segmental occlusal plane as reference line in panograms are predictable as standards of normal occlusion and useful for evaluation of tooth arrangement between adjacent teeth.

• 대한치과교정학회지
• /
• 제21권3호
• /
• pp.673-683
• /
• 1991

This research was performed to find out the adaptation patterns of maxillary and mandibular posterior teeth to the changes in relationships of vertical skeletal components, which constitute the skeletofacial complex. For this research, 61 adult malocclusion patients were chosen as subjects according to the Hellman's dental age with normally ranged FMN-A-B angle. These subjects were divided into 4 groups in maxilla and 3 groups in mandible according to mesiodistal inclinations of teeth. Following results were obtained after studying the relationships of the vertical skeletal components between each group. 1. Inspire of the fact that the FMN-A-B angle was within a normal range, the degree of mesiodistal inclinations of maxillary and mandibular posterior teeth showed differences in relation to the anteroposterior relationships of maxilla and mandible. In case where the FMN-A-B angle was large, the mesial inclinations of maxillary posterior teeth showed more increase from the posterior to the anterior, whereas in mandible it showed overall decrease. 2. The degrees of mesial inclinations of mandibular posterior teeth were increased when the angulations of lower facial height, occlusal plane angle and mandibular plane angle were greater. 3. The patterns of mesial inclinations of maxillary posterior teeth were varied according to the angulation of lower facial height. If relatively large, it showed more increase from the posterior to the anterior and it was decreased nearly consistent when the angulation was small. 4. The degrees of mesial inclinations of maxillary posterior teeth were decreased as the lower facial height, palatal plane angle, occlusal plane angle and the mandibular plane angle became greater.

• 대한치과기공학회지
• /
• 제18권1호
• /
• pp.117-127
• /
• 1996

This study was aimed to help the construction of esthetic dental prosthesis by investigation of the factors affecting on the atterition position and attrition angle of maxillary lateral incisors. Therefore 197 complete cast of maxillary and mandibualar extracted form the student of K. college were subjected for this study, and result throught the study are as follows. 1. None attrite rate of the maxiilary right lateral incisors was about 16.2% and that of the maxillary left lateral incisors was about 32.4% of examined teeth. 2. Throught mesiodistal attrition area 1) It showed that right lateral incisors was the most frequence in attrition of mesial area of incisal edge, and left lateral incisors was the most frequence in attrition of mesial and mid area of incisal edge. 2) It showed that square type arch was more frequence in attrition of all incisal edge, and ovoid type arch was more frequence in the attrition of mid area of incisal edge, and ovoid type arch was more frequence in the attrition of mid area of incisal edge, and taper type arch was more frequence in the attrition of mesial area of incisal edge than it of average frequence of right lateral incisors, by dental arch type. 3) It showed that square type arch was more frequence in the attrition of all area and mid area of incisal edge, and ovoid type arch was more frequence in the attrition of mid area of incisal edge, and taper type arch was more frequence in the attrition of mesial and distal area of incisal edge than it of average frequence of left lateral incisal, by dental arch type. 4) Sex, vertical overlap, horizontal overlap, incisal guide angle, did not affect significantly to throughout mesiodistal attrition, statistically 3. Throughout labiolingual attrition quantity. 1) It showed that throughout labiolingual attrition quantity was more attrition in order of taper type arch < ovoid type arch < square type arch, by dental arch type. 2) It showed that throughout labiolingual attrition qauntity was more attrition when the length of horizontal overlap is shorter than it of other, by horizontal overlap. 3) Throughout labiolingual attrition quantity of right lateral incisors showed that male was more attrition than it of female. 4) Vertical overlap, incisal guide angle, sex on left lateral incisors did not affect significantly to throughout labiolingual attrition, statistically. 4. Attrition angle 1) It showed that average attrition anlge of right lateral incisors were $30{\pm}13.02$ degree, and it of left lateral incisors were $26{\pm}13.37$ degree. 2) It showed that taper type arch have a bigger attrition angle than it of average of lateral incisors, and square tape arch have a smaller attrition angle than it of average of lateral incisors, by dental arch type. 3) It showed that horizontal overlap of 2.1mm above have a bigger attrition angle than it of average, by horizontal overlap. 4) It showed that female have a bigger attrition angle it of male, by sex.

• 대한치과교정학회지
• /
• 제50권4호
• /
• pp.229-237
• /
• 2020

Objective: To evaluate the construction reproducibility of a composite tooth model (CTM) composed of an intraoral-scanned crown and a cone-beam computed tomography (CBCT)-scanned root. Methods: The study assessed 240 teeth (30 central incisors, 30 canines, 30 second premolars, and 30 first molars in the maxillary and mandibular arches) from 15 young adult patients whose pre-treatment intraoral scan and CBCT were available. Examiner-Reference (3 years' experience in CTM construction) and Examiners-A and Examiner-B (no experience) constructed the individual CTMs independently by performing the following steps: image acquisition and processing into a three-dimensional model, integration of intraoral-scanned crowns and CBCT-scanned teeth, and replacement of the CBCT-scanned crown with the intraoral-scanned crown. The tooth axis angle in terms of mesiodistal angulation and buccolingual inclination of the CTMs constructed by the three examiners were measured. To assess the construction reproducibility of CTMs, intraclass correlation coefficient (ICC) assessments were performed. Results: The ICC values of mesiodistal angulation and buccolingual inclination among the 3 examiners showed excellent agreement (0.950-0.992 and 0.965-0.993; 0.976-0.994 and 0.973-0.995 in the maxillary and mandibular arches, respectively). Conclusions: The CTM showed excellent construction reproducibility in mesiodistal angulation and buccolingual inclination regardless of the construction skill and experience levels of the examiners.

• 구강회복응용과학지
• /
• 제26권1호
• /
• pp.21-32
• /
• 2010

삭제된 치아의 경사도는 치관 수복물의 유지와 저항에 있어 매우 중요한 요소이다. 하지만 다양한 구강 내 환경과 술자의 능력에 따라 이상적인 경사도를 얻는 것은 쉽지 않다. 따라서 이상적으로 삭제된 치아의 경사도와 실제 임상에서 삭제된 치아의 경사도를 조사하고자 한다. 본 실험의 연구 자료는 K대학 부속 치과병원 중앙 기공실을 통하여 보철과 전공의가 시술한 환자의 모형과 일반 기공소를 통해 일반 개업의가 시술한 환자의 모형을 수집한다. 연구 방법은 각 치아의 근원심면과 협설면을 디지털 카메라를 통해 촬영한 뒤 'ImageJ' 프로그램 상에서 치아의 삭제 각도를 측정 한 뒤 항목별( 1. 술자 집단별 분류, 2. 치열궁 내에서의 위치에 따른 분류, 3. 삭제 양식에 따른 분류 )로 분류하여 비교 분석한다. 이번 연구를 통해 조사한 결과 국내 임상가의 지대치 형성시 축면 경사각의 평균은 $15.02^{\circ}$ 표준 편차는 ${\pm}10.13^{\circ}$였다. 1. 술자 집단별 분류에 대한 분석 일반 치과의 집단의 측면 경사각과 보철과 전공의 집단의 축면 경사각에서 유의성 있는 차이를 보였다(p<0.05). 2. 치열궁 내에서의 위치에 따른 분석 치아의 근원심면과 협설측면에 따라 일반 치과의 집단의 경우 유의성 있는 차이가 없었으며(p>0.05) 보철과 전공의 집단에서는 유의성 있는 차이를 보였다(p<0.05). 치아의 전후적인 위치에 따라 일반 치과의 집단의 경우 전치부와 소구치부 사이에 유의성 있는 차이가 없었으며 (p>0.05) 두 부위와 대구치부 사이에서는 각각 유의성 있는 차이를 보였다(p<0.05). 보철과 전공의 집단의 경우 전치부와 소구치부 사이에 유의성 있는 차이가 없었으며(p>0.05) 두 부위와 대구치부 사이에서는 각각 유의성 있는 차이를 보였다(p<0.05). 상악과 하악으로 분류하여 분석한 경우 일반 치과의 집단에서 근원심면과 전체적인 축면의 경사각에 각각 유의성 있는 차이가 없었으며(p>0.05) 협설측면에서는 유의성 있는 차이를 보였다(p<0.05). 보철과 전공의 집단에서도 근원심면과 전체적인 축면의 경사각에 각각 유의성 있는 차이가 없었으며(p>0.05) 협설측면에서는 유의성 있는 차이를 보였다(p<0.05). 악궁을 좌측과 우측으로 분류하여 분석한 경우 일반 치과의 집단과 보철과 전공의 집단에서 각각 유의성 있는 차이가 없었다(p>0.05). 3. 삭제 양식에 따른 분석 단일 치관을 위한 지대치와 3본 고정성 부분 의치를 위한 지대치로 분류하여 분석한 결과 일반 치과의 집단에서 근원심면의 경우 단일 치관을 위한 지대치의 축면 경사각과 3본 고정성 부분 의치를 위한 지대치의 축면 경사각에 유의성 있는 차이를 보였으며(p<0.05) 협설측면과 전체적인 축면의 경우 각각 단일 치관을 위한 지대치의 축면 경사각과 3본 고정성 부분 의치를 위한 지대치의 축면 경사각에 유의한 차이가 없었다(p>0.05). 보철과 전공의 집단에서는 협설측면의 경우 단일 치관을 위한 지대치의 축면 경사각과 3본 고정성 부분 의치를 위한 지대치의 축면 경사각에 유의성 있는 차이가 없었으며(p>0.05) 근원심면과 전체적인 축면의 경우 각각 단일 치관을 위한 지대치의 축면 경사각과 3본 고정성 부분 의치를 위한 지대치의 축면 경사각에 유의한 차이를 보였다(p<0.05). 이상에서 임상에서 치아 삭제시 이상적인 축면 경사각을 얻기 힘들며 이는 술자의 경험과 악궁 내에서의 위치, 삭제 양식에 따라 영향을 받을 수 있다.

• 대한치과교정학회지
• /
• 제26권6호
• /
• pp.657-666
• /
• 1996

Orthopantomogram is commonly used to evaluate root parallelism. "Good parallelism" between roots is widely accepted as one of the guidelines of a successful orthodontic treatment. In case there was a large angle between crown axis and root axis, and if we valued only the position of crown in establishing occlusal relationship without considering of the situation of root, the problem of root arrangement between adjacent teeth would be occurred. The estimate of root parallelism in mesiodistal direction before and after orthodontic treatment must be emphasized. The intent of this study was to determine the clinical importance and correlation of the angle between crown axis and root axis. Orthopantomograms of 105 orthodontic patients being treated in Yonsei university were used in this study. Twenty-eight teeth in both maxilla and mandible were selected and analyzed quantitively to evaluate the angle between crown axis and root axis, and obtain the correlationship among the individual teeth. The results are as follows: 1. Among the teeth presenting normal distribution, the maxillary right canine showed the largest mean value( $5.73{\pm}4.42^{\circ}$), which was composed of the crown-root angles, and the mandibular left lateral incisor showed the smallest mean value( $0.60{\pm}3.76^{\circ}$). 2. The crown-root angles of the maxillary incisors and the first molars, and the mandibular central incisors and the first molars didn't show normal distribution and the ranges of these angles were dispersed. 3. Significant differences were present between the crown axis and the root axis except for lower first premolars. (p<0.05) 4. No significant difference was present for the crown-root angle between right and left side, (p<0.05) 5. No significant difference was present for the crown-root angle between male and female except for lower left first premolar. (p<0.05) 6. In the upper right quadrant, significant correlations were present between crown-root angles of the central incisor and lateral incisor, lateral incisor and canine. In the upper left quadrant, significant correlations were present between crown-root angles of the central incisor and lateral incisor. In the lower right quadrant, significant correlations were present between crown-root angles of the central incisor and lateral incisor, first molar and second molar. In the lower left quadrant, significant correlations were present between crown-root angles of the central incisor and lateral incisor, lateral incisor and canine, first molar and second molar. (p<0.05)