• Journal of Convergence Society for SMB
• /
• v.2 no.1
• /
• pp.25-31
• /
• 2012

Recently Wireless Communication technologies are widely used in Small And Medium Business fields. Wireless mesh networks have been studied as the next generation technology to solve problem of conventional wireless networks. Wireless mesh network uses a 802.11 when make up of network. mesh clients occurs Hard handover moving between ones. This increases the handover latency of the network mobility is a very great issues. Consequently, this paper propose a channel information previously methods to reduce the handover latency selective channels. Proposed scheme accounts for more than 90% of the probe delay to minimize the client had to move the mesh based on the old channel to retrieve information. Through simulation, the proposed scheme had shorter handover delay time than transitional full scan and selective scan. Through results of evaluation, the suggest PCISS scheme more fast 6.5% than transitional scheme.

• Korean Journal of Food Science and Technology
• /
• v.41 no.1
• /
• pp.69-76
• /
• 2009

This study was conducted to evaluate the physicochemical and sensory characteristics of chiffon cakes made with rice flour ranging from 20-100% in place of wheat flour. The water binding capacity of the rice flour was greater than that of the wheat flour and its fat binding capacity was lower than that of the wheat flour. The batter stability data indicated that the 100% treatment was better than the control, and specific gravity values and specific loaf volumes were lower in the samples with added rice flour. Texture analysis found no significant differences in hardness, adhesiveness, cohesiveness, gumminess, and chewiness between the control and the 100% treatment. In the case of crust color, the rice flour-added chiffon cakes did not show any significant differences for their 'a' values. In addition, their crumb color was not significantly different in terms of both their 'L' and 'a' values. According to the sensory evaluation, there was no significant difference in overall acceptability between the control and the rice flour-added chiffon cakes. The highest sensory scores were obtained by the 100% treatment for overall acceptance and moistness. However, flavor, cohesiveness, and brittleness were not significantly different. These study results show that wheat flour could be replaced by rice flour up to 100% in chiffon cake.

• The Journal of the Korea Contents Association
• /
• v.14 no.1
• /
• pp.364-373
• /
• 2014

The relationship between a service provided via the information system and user satisfaction has been thought of as an important factor for the development of a new service for the information system. In this study, the twelve new key services that are applicable to national R&D report system were derived by web environment changes in step with IT technology developments in order to support the new service for the user. The twelve new key services are as follows; semantic search service for national R&D report, associated report service, RSS service, mesh-up service, topic-map service, open API service, personalized service, collective intelligence service, SNS service, unstructured data service, detailed search service, mailing service. To assess the quality attribute of the twelve new key services in the national R&D report system, a survey was performed. In conclusion, a stepwise service plan for the national R&D report system was proposed which would use the satisfaction coefficient and the results of the service classification. The following step-by-step service should be developed by in this way. The unstructured data service, personalized service, associated report service, topic-map service, open API service, and the collective intelligence service are needed to develop the first step and RSS service, mesh-up service, semantic search service for the national R&D report, mailing service, detailed search service, and SNS service are needed to develop the second step.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.2
• /
• pp.8-16
• /
• 2001

To manufacture toilet tissue with ONP (old newspaper), the effect of fractionation fiber (R150, R100, R70 mesh) and bleaching(P, PY), blending (70/30) with MOW(mixed office wastepaper) or WL(white ledger) and the addition of softener on the optical and mechanical properties were studied. Considering the pulp yield, brightness and strengths, fibers of R100 mesh fraction were proper to be produced to toilet paper from ONP. This pulp showed the pulp yield of 76.8%, brightness of 50.2% ISO and tensile index of 21.1 Nm/g. By the bleach with P and PY stages, the brightness of the pulps increased up to 60.3% ISO and 61.8% ISO, respectively. When blended with MOW (57.3% ISO) or WL (76.2% ISO), the brightness of the former increased up to 58.5% ISO, the latter up to 63.6% ISO. The strengths of pulp blended with WL were higher than those of fractionated pulp from 100% ONP, however there was no difference in strengths between fractionated pulp and blended pulp wth MOW. While the addition of softener improved the softness of paper, but it decreased strengths of pulp and extended dispersing time in water.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6B
• /
• pp.350-357
• /
• 2007

The IEEE 802.15.3 high-rate WPAN has been developed to communicate with devices within l0m. A piconet consists of one Piconet Coordinator (PNC) and several devices. The devices associated with a parent piconet can become child PNCs in order to form child piconets. A mesh network made up of a parent piconet and several child piconets can support multi-hop communications. In this paper, we analyze the maximum level and the avaliable superframe size to make the best use of bandwidth for multi-hop communications, and compare the analysis with the simulation results in terms of time to discover devices for multi-hop communications. The average number of levels in mesh networks is shown to be about 1.9 when the number of devices increases within a fixed area. We have also shown that the maximum available superframe size is 52ms and the discovery time is approximately 155ms.

• Archives of Craniofacial Surgery
• /
• v.10 no.2
• /
• pp.81-85
• /
• 2009

Purpose: The inferior orbital wall is the most vulnerable to injury and inadequate reconstruction of inferior orbital fracture result in postoperative complications include enophthalmos, ocular dystopia and diplopia. Although the anatomical reconstruction of the inferior orbital wall is necessary to prevent these complications, the complexity of inferior orbital wall makes it difficult. We fabricated and remodeled the titanium micro-mesh plate for the anatomical reconstruction of inferior orbital wall. Methods: Twenty-nine patients with inferior orbital wall blow-out fracture were operated and twelve of them presented large extensive fracture. We intraoperatively fabricated and remodeled the Titanium-micro mesh to angulated lazy S shape similar to contralateral uninjured orbit. The preoperative and postoperative facial CT scan verified the 3-dimensional and anatomical reconstruction of the fractures. The mean follow-up was 19.7 months and postoperative complications was evaluated. Results: All cases showed the exact anatomical reconstruction, but there were minor complications in two cases. one patient had postoperative diplopia until 3months after surgery and the other patient had persistent enophthalmos (2 mm), but no further surgical correction was required. Conclusion: The comprehensive understanding of orbital convexity is the most important factor for anatomical reconstruction of inferior orbital fracture. We could prevent postoperative complications after inferior orbital wall reconstruction by intraoperative fabrication and anatomical remodeling of Titanium micro-mesh.

• Journal of Korean Neurosurgical Society
• /
• v.41 no.2
• /
• pp.111-117
• /
• 2007

Objective : The objective of this study was to validate the effects of a titanium mesh cage and dynamic plating in anterior cervical stabilization after corpectomy. Methods : A retrospective study was performed on 31 consecutive patients, who underwent anterior cervical reconstruction with a titanium mesh cage and dynamic plating, from March 2004 to February 2006. Twenty-four patients had 1-level and 7 had 2-level corpectomies. Ten patients underwent surgery with a cage of 10-mm diameter and 21 with 13-mm diameter. Neurological status and outcomes were assessed according to Odom's criteria. Sagittal angle, coronal angle, settling ratio, sagittal displacement, and cervical lordosis were used to evaluate the radiological outcomes. Results : In overall, 26 [83.9%] of 31 showed excellent or good outcomes. Thirteen percent [4 cases] of the patients developed surgical complications, such as hoarseness, transient dysphagia, or nerve root palsy. Seven [22.6%] patients had reconstruction failure:5 [20.8%] in the 1-level corpectomy group and 2 [28.5%] in the 2-level corpectomy group. Revisions were required in 2 patients with plate pullout due to significant instability. However, none of 5 patients who demonstrated cage displacement or screw pullout, underwent a revision. Radiographs revealed bony consolidation in 96.3% of the patients, including 6 patients with implantation failure during the follow-up period. Conclusion : Based on our preliminary results, the titanium mesh cage and dynamic plating was effective for cervical reconstruction after corpectomy. The anterior cervical reconstruction performed with dynamic plates is considered to reduce stress shielding and greater graft compression that is afforded by the unique plate design.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.1
• /
• pp.17-25
• /
• 2013

The mechanical properties appeared at the concrete mixed with Polypropylene fiber($1kg/m^3$, $3kg/m^3$, $5kg/m^3$) are compared with normal concrete and wire mesh one and evaluated. Achieved slump test to search effect that PP fiber gets to workability, even if the mixing amount of fiber increases, confirmed that slump value is no change almost. The no difference can be caused by hard mixture, but because of the big softness of fiber there is no effect greatly up to PP fiber mixing amount $5kg/m^3$ even with soft mixture. Compressive strengths and flexural strengths of the concretes with PP fiber and without the fiber are appeared almost alike. If examine load resistance ability by PP fiber mixing amount increase, it could know that the increase of fiber mixing amount improves load resistance ability and the toughness index is increased. While normal concrete is broken at the same time with crack, fiber mixed concrete stand in flexure load continuously after crack occurrence. In compare with wire mesh embeded concrete, wire mesh mixed concrete stands in some degree in flexure load by wire mesh crack occurrence and the test piece was broken at the same time. But, it could know that the PP fiber mixed concrete resist continuously to flexure load in bigger displacement.

• The Journal of the Korea Contents Association
• /
• v.8 no.5
• /
• pp.94-103
• /
• 2008

In this paper, we adapt the $\kappa$-means clustering technique to segmenting a given 3D mesh. In order to avoid the locally minimal convergence and speed up the computing time, first we extract sharp vertices from the mesh by analysing its curvature and convexity that respectively reflect the local and global geometric characteristics from the viewpoint of cognitive science. Next the sharp vertices are partitioned into $\kappa$ clusters by iterated converging with the $\kappa$-means clustering method based on the geodesic distance instead of the Euclidean distance between each pair of the sharp vertices. For obtaining the effective result of $\kappa$-means clustering method, it is crucial to assign an initial value to $\kappa$ appropriately. Hence, we automatically compute a reasonable number of clusters as an initial value of $\kappa$. Finally the mesh segmentation is completed by merging other vertices except the sharp vertices into the nearest cluster by geodesic distance.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.1
• /
• pp.33-38
• /
• 2015

In this study, flat-type photocatalytic reaction system is applied to reduce toxic hexavalent chromium (Cr(VI)) to trivalent chromium (Cr(III)) in aqueous solution under UV irradiation. To overcome the limitation of conventional photocatalysis, a novel approach toward photocatalytic system for reduction of hexavalent chromium including nanotubular $TiO_2$ (NTT) on two kinds of titanium substrates (foil and mesh) were established. In addition, modified Ti substrates were prepared by bending treatment to increase reaction efficiency of Cr(VI) in the flat-type photocatalytic reactor. For the fabrication of NTT on Ti substrates, Ti foil and mesh was anodized with mixed electrolytes ($NH_4F-H_2O-C_2H_6O_2$) and then annealed in ambient oxygen. The prepared NTT arrays were uniformly grown on two Ti substrates and surface property measurements were performed through SEM and XRD. Hydraulic retention time(HRT) and substrate type were significantly affected the Cr(VI) reduction. Hence, the photocatalytic Cr(VI) reduction was observed to be highest up to 95% at bended(modified) Ti mesh and lowest HRT. Especially, Ti mesh was more effective as NTT substrate in this research.