• Journal of the Korean Society of Safety
• /
• v.14 no.3
• /
• pp.48-53
• /
• 1999

It is widely recognized that Hartmann tube for measuring the minimum ignition energy(MIE) of powder. But It requires long time and operational skills for measuring. As a variety of new fine powders are being produced day by day in industry, Japen has been developing a measurement system which employs a new method to create a dust/air mixture in a miniature combustion box. In this system, by vibration, the powder is successively fed downward through a hopper made up of metal mesh, and then it is formed into a thin, certain-like, dust/air mixture. With this new apparatus, three types of powder-Lycopodium, Anthraquinone, and Polyacry-lonitrile-were tested and the data of MIE were compared with those of a conventional apparatus (the Hartmann tube). Two of them agreed satisfactory, but the other, Anthraquinone, showed quite different values. It is guessed that the agglomerations of the powder particles appear because of particle shapes, static-charge and humidity.

• Journal of Korean Neurosurgical Society
• /
• v.44 no.4
• /
• pp.259-261
• /
• 2008

We present a case of delayed oral extrusion of a screw after anterior cervical interbody fusion in a 68-year-old man with osteoporosis. Fifteen months earlier, he had undergone C5 corpectomy and anterior cervical interbody fusion at C4-6 for multiple spinal stenoses. The patient was nearly asymptomatic, except for a foreign body sensation in his throat. We conclude that the use of a mesh graft or other instrument in elderly patients and those with osteoporosis or problematic bone quality should be considered carefully and that if surgery were to be performed, periodic postoperative follow-up evaluations are mandatory.

• International Journal of Safety
• /
• v.1 no.1
• /
• pp.58-61
• /
• 2002

A preparation method of cobalt supported alumina catalyst for a emergency escape mask cartridge has been studied. Catalysts were prepared by incipient wetness impregnation method using pre-shaped $\gamma$=alumina powders of 70-100 mesh. The catalyst was tested in a continuous-flow reactor system and characterized by elemental analysis, BET and TGA-DTA techniques. Cobalt shows higher activity than platinum or nickel for carbon monoxide oxidation at room temperature. Optimum loading amount of cobalt was 10 wt.% for CO oxidation and the reaction activity increases gradually with the increase of calcination temperature up to $450^{\circ}C.

• Environmental Engineering Research
• /
• v.22 no.4
• /
• pp.356-362
• /
• 2017

This study investigates the use of methyl-esterified eggshell membranes (MESM) for the harvesting of microalgae species under various conditions. Eggshell membranes were esterified with HCl to impact polycationic characteristics. After methyl esterification, the negative surface charge property of eggshell membrane was changed from negative to positive for all pH values to improve microalgae sorption capacity. The harvesting efficiency of microalgae by MESM reached 78-99% for all pH ranges evaluated. In addition, a 150 mesh particle size and $10mg\;L^{-1}$ MESM dose were found to yield up to 98% microalgae harvesting. These results indicate that the high cationic charge of MESM strongly adsorbs the negatively-charged microalgae. MESM is biocompatible and can be applied to the harvest of microalgae.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.2
• /
• pp.175-185
• /
• 2017

This paper presents new differential methods for computing the combined and single dynamic stability derivatives of flight vehicle. Based on rigid dynamic mesh technique, the combined dynamic stability derivative can be achieved by imposing the aircraft pitching to the same angle of attack with two different pitching angular velocities and also translating it to the same additional angle of attack with two different rates of angle of attack. As a result, the acceleration derivative is identified. Moreover, the rotating reference frame is adopted to calculate the rotary derivatives when simulating the steady pull-up with different pitching angular velocities. Two configurations, the Hyper Ballistic Shape (HBS) and Finner missile model, are considered as evaluations and results of all the cases agree well with reference or experiment data. Compared to traditional ones, the new differential methods are of high efficiency and accuracy, and potential to be extended to the simulation of combined and single stability derivatives of directional and lateral.

• Proceedings of the KOSOMBE Conference
• /
• v.1994 no.12
• /
• pp.75-78
• /
• 1994

Clinically, proximal bone resorption in the femur is frequently seen postoperatively on the follow up X-rays after total hip replacement(THR). We developed the finite element model of cementless THR. The model is two dimensional side plate model, whereby the three dimensional structural integrity of the bone can be accounted for by a separate two dimensional mesh, a side plate. The subject of this article is the development and application of this two dimensional side plate FEM to study the reverse effect of the various degree of bone resorption of femur after THR. The results of this study indicates that two dimensional side plate model is good and simple alternative to complex three dimensional model and the severity of the proximal bone resorption has the effect of more increasing stress on the cortex at the level of femoral stem tip.

• Journal of Multimedia Information System
• /
• v.3 no.4
• /
• pp.149-154
• /
• 2016

Wireless mesh networks (WMNs) are used for metropolitan area network that requires high network throughput for handling many users. TDMA-based access is a common solution for this problem and several scheduling methods have been proposed. However, existing heuristic methods have room for improvement at network throughput although they are low complexity. In this paper, we propose a novel divided scheduling method based on structural characteristics in order to improve network throughput in WMNs. It separately schedules neighbor links of gateways and that of the other links by different scheduling algorithms. Simulation-based evaluations show that our proposal improves up to 14% of network throughput compared with conventional scheduling algorithm script.

• Structural Engineering and Mechanics
• /
• v.23 no.3
• /
• pp.217-232
• /
• 2006

A crack model for the fracture in concrete based on meshless method is proposed in this paper. The cracks in concrete are classified into micro-cracks or macro-cracks respectively according to their widths, and different numerical approaches are adopted for them. The micro-cracks are represented with smeared crack approach whilst the macro-cracks are represented with discrete cracks that are made up with additional nodes and boundaries. The widely used meshless method, Element-free Galerkin method, is adopted instead of finite element method to model the concrete, so that the discrete crack approach is easier to be implemented with the convenience of arranging node distribution in the meshless method. Rotating-Crack-Model is proved to be preferred over Fixed-Crack-Model for the smeared cracks of this composite crack model due to its better performance on mesh bias. Numerical examples show that this composite crack model can take advantage of the positive characteristics in the smeared and discrete approaches, and overcome some of their disadvantages.

• Journal of the Korean Mathematical Society
• /
• v.36 no.6
• /
• pp.1033-1046
• /
• 1999

This paper is devoted to the point wise error estimate up to boundary for the standard finite element solution of Poisson equation with Dirichlet boundary condition. Our new approach used the discrete maximum principle for the discrete harmonic solution. once the mesh in our domain satisfies the $\beta$-condition defined by us, the discrete harmonic solution with dirichlet boundary condition has the discrete maximum principle and the pointwise error should be bounded by L-errors newly obtained.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.7
• /
• pp.91-97
• /
• 2018

This study has an ultimate purpose to find some change direction of education in the Korean language education field, that is, in and out of the Korean language classroom keeping up with social changes. Especially, this study will investigate progressive educational ways in terms of not only developing software, but also grafting hardware relating to mobile technologies. For this, this study will classify the cases of teaching and learning happened in and out of Korean language classrooms and to introduce practical ways of education to apply mobile technologies according to the each case. As a concrete method, this paper proposed a change plan of classroom change that incorporates 'Miracast' and 'smart phone' and a change plan out of the classroom using mesh. This study can be meaningful in that the teaching and learning are linked more organically through the smart phone and the education is called 'IoT world' so that both teachers and learners can easily access education.