• 한국정밀공학회지
• /
• 제9권3호
• /
• pp.83-101
• /
• 1992

A systematic method of remeshing is required due to severe mesh distortion after some finite deformation in the finite element analysis of practical forging processes. In order to cope with the problem of mesh degeneracy during deformation, the proper design of meshes plays an improtant role in the analysis. In so-called "Modular Remeshing", the physical characteristics of metal flow and geometric characteristics are incorporated in "Module", which can be applied to the mesh design for a certain mode of deformation in so far as the topology of deforming region remains the same. For the purpose of more effective and systematic use of the modular remeshing scheme, an expert system has been developed in the framework of the proposed remeshing schemel. In oredr to show the effectiveness of the method, the rib-web type forging with axial relief or radial relief and spike forging are simulated. It has been thus shown that the proposed method of automatic remeshing by using modular remeshing and expert system can be futher extended and applied to various forging problems with complicated geometrical configurations.ical configurations.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.311-318
• /
• 2013

The paper describes the prediction method for the unsteady flow field and the aeroacoustic noise of an small axial fan. The prediction method is comprised of various CFD conditions and acoustic analogy by using Ffowcs Williams-Hawkings equation. The diameter of tested axial fan is 170 mm and number of blade is 5. Virtual anechoic room which has same size with real one was used for CFD. URANS and LES models were used. For mesh dependence study, a different mesh type was tested and optimized mesh was selected. Calculation conditions were also studied such as time step and turbulence model for accurate noise analysis. In this paper, we got optimum analysis conditions and computational results. The unsteady pressure fluctuation at given 4 points were compared between the measured data and computational results. Also, the predicted acoustic spectrum at 3 given microphone points were compared with measured ones.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 추계학술발표대회 개요집
• /
• pp.82-84
• /
• 2005

Fatigue assessment of welded structure is very sensitive to the method of local stress determination. Normally, hot spot stress which is surface stress extracted from 0.5t, 1.5t away from weld toe is widely used to obtain local stress. However, this method has a lot of limitation in the evaluation of fatigue strength. Therefore, mesh has to comply with strict requirements since stress extracted from this method strongly rely on mesh size and element types. And that method does not cover the stress gradient through thickness direction since only surface stress is considered. Recently, new method to obtain local stress is proposed, which is structural stress. This method has an advantage, which is mesh intransitiveness and covering the effect of both bending and axial stress in local area. In this paper, fatigue test data for various welded joints was analyzed to review the reliability of structural stress. As a result, it is verified that S-N curve using structural stress guaranteed single master curve for various joint type and testing condition.

• Journal of Computational Design and Engineering
• /
• 제3권2호
• /
• pp.151-160
• /
• 2016

Cutter-workpiece engagement (CWE) is the instantaneous contact geometry between the cutter and the in-process workpiece during machining. It plays an important role in machining process simulation and directly affects the calculation of the predicted cutting forces and torques. The difficulty and challenge of CWE determination come from the complexity due to the changing geometry of in-process workpiece and the curved tool path of cutter movement, especially for multi-axis milling. This paper presents a new method to determine the CWE for general milling processes. To fulfill the requirement of generality, which means for any cutter type, any in-process workpiece shape, and any tool path even with self-intersections, all the associated geometries are to be modeled as triangle meshes. The involved triangle-to-triangle intersection calculations are carried out by an effective method in order to realize the multiple subtraction Boolean operations between the tool and the workpiece mesh models and to determine the CWE. The presented method has been validated by a series of case studies of increasing machining complexity to demonstrate its applicability to general milling processes.

• 전기학회논문지
• /
• 제68권1호
• /
• pp.207-214
• /
• 2019

A large-capacity wireless power system is a technology that transmits electric power of kW or more in a noncontact type. Electric cars, electric buses, and electric railways. In order to increase the power transmission efficiency, a resonance method using a frequency of kHz is applied and the efficiency is 80 ~ 90%. In this case, the loss is 10 ~ 20% other than efficiency, and corresponds to several hundreds of W to several kW in kW class wireless power transmission. 35 kW wireless feed system environment, and induced current in the nearby conductive part was measured. As a result of analysis, it was confirmed that induction phenomenon is higher as the loop configuration of the conductive part per area is dense. The increase of the induced current in the mesh loop is characterized by the density of the nearby conductive part having a permeability per unit area. The concentration of the magnetic field by the permeability is increased and the induction phenomenon causing the induction current is increased. It was confirmed that induction phenomenon increases by about 2.7 times when 9 times dense structure is formed.

• 한국임상수의학회지
• /
• 제39권6호
• /
• pp.378-383
• /
• 2022

A 3-year-old, 24-kg intact female Border Collie was referred for a toe-touch weight-bearing stance, intermittent weight-bearing lameness, and moderate pain reaction of the right forelimb on physical examination and right humerus olecranon avulsion fracture on diagnostic imaging examination. Surgical repair was performed using tension band wiring to re-attach the triceps tendon and distal olecranon. Migration of the distal olecranon fragment was observed due to comminuted fracture of the fragment 5-days after surgery, and revision surgery was performed. The tension-relieving sutures were passed through the pre-drilled hole in the olecranon, and the polyester mesh was augmented to the suture region, covering the triceps tendon and olecranon drilling hole using the Krackow suture pattern. The elbow joint was immobilized using a type IA transarticular external fixator, which was removed 8 weeks after surgery. Fourteen weeks after surgery, no lameness was observed on gait evaluation. At follow-up after 7 months, the distal olecranon fragment had stabilized, and no lameness was observed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.406-410
• /
• 1993

In the industria; heat treatment fields, some parts of the continous funcae have been automated, but there are not enough interests and achievements for sutomatic charging machine. The automatic charging machine is set up to the industrial mesh belt type continuous furnace which continuously orintermittently charge and extract industrial units for the heat treatments.

• 방재기술
• /
• 통권11호
• /
• pp.23-30
• /
• 1991

For the prevent of fire accident or explosion disasters from inflammable gas and vapour, flame arresters are used in chemical equipment, oil tank or other similar installation. The flame arresters have been used mainly wire gauze type. Wire gauze type flame arrestes is affected several factors. We have know that the quenching ability has a great of difference the preference in accordance with flame velocity, direction of flame propagation and wire net of mesh and number of qauze and introduce examination result data quoated from the abroad.

• 한국작물학회지
• /
• 제68권1호
• /
• pp.20-26
• /
• 2023

고구마 괴근에 함유되어 있는 섬유질 함량은 품종에 따라 차이가 있다. 일부 품종에서 찌거나 구워서 섭취 시 입안에서 감지되는 섬유질 함량이 많아 식감을 떨어뜨리는 요인이 되고 있다. 본 시험은 섬유질 분리를 위한 거름망(체)의 적정 눈 크기를 탐색하여 분리 방법을 확립하고, 분리된 섬유질의 조성성분, 염색법을 이용한 섬유질 간이검정 가능성, 그리고 품종 간에 섬유질 함량 차이를 구명하고자 수행한 결과는 다음과 같다. 1. 찐 고구마를 으깬 후 3회 세척하여 섬유질 함량을 측정한 결과 143.3 mg/100 g으로 5회 세척(128.4 mg/100 g)에 비해 분리된 섬유질 양이 많아 3회 세척이 유리하였다. 2. 호감미 품종은 체의 눈이 큰 10 mesh (85.9%)와 30 mesh (9.6%)에서 95.5%가 잔류되었고 진율미 품종은 10 mesh (74.9%) 및 30 mesh (16.7%)에서 87.6%가 잔류되어 섬유질 분리를 위한 체의 눈은 30 mesh (600 ㎛)가 적당하였다. 3. 고구마 품종별 섬유질 함량 분석 결과, 진홍미가 가장 낮았고(24.8 mg/100 g), 호감미(111.4 mg/100 g)으로 가장 높아 호감미의 섬유질 함량은 진홍미의 4.5배 이상이었다. 4. 호감미와 진율미 품종에서 분리된 섬유질의 셀룰로스, 헤미셀룰로스 및 리그닌의 함량은 비슷한 함량을 나타내었고 2품종의 평균은 각각 32.5, 22.3 및 29.6%이었다. 5. 염색된 면적의 분포도와 섬유질 함량과의 상관계수는 0.79 (p < 0.001)로 유의성이 있었으며, 품종 간 염색 분포도가 다르게 나타나 생고구마를 이용한 염색방법으로 섬유질 함량에 대한 간이검정이 가능할 것으로 판단되었다.

• 한국수산과학회지
• /
• 제8권1호
• /
• pp.7-10
• /
• 1975

제주도 고등어 자망어업의 주어기인 1974년 5월 28일부터 8월 31일까지 서귀포와 비양도근해어장에서 고등어 자망어구의 이망율에 관한 시험조업결과는 다음과 같다. 1. $X^2$ t 검정에 의하면 고등어 nylon-monofilament 자망 B형이 nylon-multifilament 자망 A형보다 이망성능이 우위하고 나망율비는 $m_A:m_B=1:1.8$이다. 2. 망목 75mm인 nylon-monofilament 자망 C형, D형이 망목 85mm인 nylon-monofilament 자망 E형 F형 보다 이망성능이 우위하고 이망율비는 $m_E{\cdot}F:m_C{\cdot}D=1:2.8$이다. 3. 망계 굵기가 120tex와 75tex이고 망목이 75m 및 85mm인 C, D, E, F, 형에서는 상호간의 우위는 모두 확인할 수 없었다.