• 태양에너지
• /
• 제12권3호
• /
• pp.37-46
• /
• 1992

상변화 물질로 Paraffin wax를 사용한 잠열축열 시스템의 축열성능을 실험을 통하여 조사하였다. 가열유체로는 ethylene glycol을 사용하였고 왁스로의 전열을 위해 열싸이폰을 사용하였다. 왁스의 유효열전도율을 높이기 위해 여러장의 구리망을 왁스에 넣었고 실험은 체적비 2%, 3%, 4%에 대해 유량을 변화시키며 수행하였으며 몇가지 주요결과는 다음과 같다. (1) 구리망은 열전도를 촉진시켜 왁스의 온도를 균일화 하는 역할을 한다. (2) 구리망수의 증가는 열전도를 향상시키는 반면 응해된 왁스의 대류작용을 억제한다. (3) 축열시스템에 최적인 구리망의 수가 존재하며 이 연구에서는 체적비로 나타낼 때 $3{\sim}4%$인 것으로 나타났다.

• 태양에너지
• /
• 제12권3호
• /
• pp.28-36
• /
• 1992

상변화물질로의 열전달기구로써 열싸이폰을 사용하는 잠열 축열 시스템의 축열성능을 실험을 통해 조사하였다. 상변화 물질로는 파라핀 왁스(Sunoco P-116)를 사용하였고 왁스의 유효열전도계수를 높이기 위해 여러겹의 구리망을 왁스에 넣었으며 이 구리망은 열싸이폰의 fin의 역할도 하게했다. 열주입율을 변화시켜 실험을 수행하였으며 주요 결론은 다음과 같다. (1) 구리망 사이의 공간은 용해된 왁스의 대류유동을 허용하여 왁스내의 온도를 비교적 균일하게 해 준다. (2) 구리망의 수가 증가하면 전도열전달은 향상하나 대류작용은 억제된다. (3) 구리망의 수가 증가하면 열싸이폰의 열관류계수와 전 열관류계수는 증가하나 열싸이폰의 응축부와 왁스사이의 열전달계수는 감소한다.

• 대한전자공학회논문지SD
• /
• 제40권7호
• /
• pp.507-517
• /
• 2003

메쉬 기반의 파장분할다중화(WDM)망에서는 단 하나의 광섬유 케이블의 장애로도 심각한 데이터의 손실을 야기할 수 있다. 따라서, 이러한 장애에 대한 효율적인 복구 알고리즘이 필요하다 본 논문에서는 메쉬기반의 WDM 망에서의 복구 기법에 대한 새로운 알고리즘을 제안하였고 기존의 복구 기법과 비교하였다. 복구 방법으로는 경로 복구, 링크 복구의 대표적인 두 가지 기법이 있다. 이러한 기법들의 한 가지 공통점은 단일 링크장애에 대해서 논하고 있다는 것이다. 본 논문에서 제안한 복구 기법에서는 각각의 링크 장애에 대한 복구 경로를 확보하지 않는다. 메쉬 기반의 WDM망을 여러 개의 작은 폐루프로 분리하고 폐루프내에서 단일 링크 장애가 발생하면 그 폐루프를 우회하여 복구 경로가 결정되는 복구 기법과 복구 경로가 폐루프 내에서만 결정되는 복구 기법을 제안하였다. 경로 복구 기법과 링크 복구 기법과 더불어 제안된 기법의 성능을 비교하였다. 시뮬레이션 결과 제안된 두 기법은 비록 총 사용되는 파장 마일리지가 기존의 복구 기법보다 10%에서 50% 정도 증가하게 되지만 경로 설정에 소요되는 실행시간(CPU Time)은 경로 복구 기법과 링크 복구 기법에 비해 상당히 감소되는 결과를 얻게 되었다.

• 수산해양기술연구
• /
• 제48권4호
• /
• pp.322-336
• /
• 2012

To study the catching efficiency of biodegradable trammel net for swimming crab (Portunus trituberculatus), three types (biodegradable, monofilament and multifilament) of trammel nets were used in the field test, and the tests were carried out 16 times with two different mesh sizes (105mm and 160mm) in the Yeonpyeong fishing ground of Korea, 2009~2011. The catching efficiency of three type nets was analyzed by catch in number, catch in weight and average weight per individual of small and large size swimming crab by net types and mesh sizes. Statistical T-test was also carried out to verify the efficiency between the three types of nets. The results are as follows. The catch in number of swimming crab was 24,667 and formed about 81.0% of total catch. Of all swimming crab catch, small swimming crabs with less than 64mm in carapace length which is a prohibited landing size by law formed 48.1%, larger swimming crabs with more than 64mm in carapace length which is a landing size formed 51.9%. In 105mm mesh size trammel net test, the catch share in number of small size swimming crab by biodegradable trammel net was 47.5% in comparison with multifilament trammel net and 74.2% in comparison with monofilament trammel net, so biodegradable trammel net has more protective effects on small size swimming crab than other types of trammel nets. The protective effects for small size swimming crab by biodegradable trammel net was 25.8~52.5% in comparison with other types of trammel nets. The catch share in weight of large size swimming crab by biodegradable trammel net was 98.3% in comparison with multifilament trammel net and 92.3% in comparison with monofilament trammel net, so biodegradable trammel net has a similar catch efficiency to multifilament trammel net. The results of 160mm mesh size trammel net test have shown similar results of 105mm mesh size trammel net test. This study shows that biodegradable trammel net is a more useful fishing gear than multifilament and monofilament trammel net because biodegradable trammel net has lower catch rate than other types of nets in small size swimming crab and similar catch rate than multifilament trammel net which is a well used net by fishermen.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제12권1호
• /
• pp.21-29
• /
• 2004

This paper is to study the heat transfer performance of the copper-water heat pipe with screen wicks. Recently, the semiconductor capacity of an electronic unit becomes larger, but its size becomes much smaller. As a result, a high- performance cooling system is needed. Experimental variables are inclination angles, temperatures of cooling waters and the mesh number of screen wicks. The distilled water was used as a working fluid. Based on the experimental results, when the copper-water heat pipe of 6mm diameter is used at the top heat mode, the heat transfer performance of 100 mesh 2 layers heat pipe is better than that of 150 and 200 mesh. The thermal resistance of the two layers with the 100-mesh screen was 0.7-$0.8^{\circ}C$/W.

• 한국CDE학회논문집
• /
• 제1권3호
• /
• pp.224-233
• /
• 1996

An automatic mesh generation scheme with triangular finite elements on three-dimensional surfaces has been developed. The surface triangulation process is performed as follows. To begin, surfaces with key nodes are transformed to two-dimensional planes and the meshes with triangular elements are constructed in these planes. Finally, the constructed meshes are transformed back to the original 3D surfaces. For the mesh generation, an irregular mesh generation scheme is employed in which local mesh densities are assigned by the user along the boundaries of the analysis domain. For this purpose a looping algorithm combined with an advancing front technique using basic operators has been developed, in which the loops are recursively subdivided into subloops with the use of the best split lines and then the basic operators generate elements. Using the split lines, the original boundaries are split recursively until each loop contains a certain number of key nodes, and then using the basic operators such as type-1 and type-2, one or two triangular elements are generated at each operation. After the triangulation process has been completed for each meshing domain, the resulting meshes are finally improved by smoothing process. Sample meshes are presented to demonstrate the versatility of the algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.23-27
• /
• 1990

Adaptive mesh refinement scheme is incorporated with the Boundary Element Method (BEM) in order to get accurate solution with relatively fewer unknowns for the case of magnetostatic field analysis and A new and simple posteriori local error estimation method is presented. The local error is defined as integration over the element of the difference between solutions acquired us ing second order and first order interpolation function and is used as the criterion for mesh refinement at given grid. Case study for two dimensional problems with singular point reveals that meshes are concentrated on the neighbor of singular point and the error is decreased gradually and the solutions calculated on the domain are converged to the analytic solution as the number of unknowns increases. The adaptive mesh gives much better rate of convergence in global errors than the uniform mesh.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.731-734
• /
• 1998

A scalable parallel algorithm is proposed for efficient image component labeling with local operatos on a mesh connected SIMD computer. In contrast to the conventional parallel labeling algorithms, where a single pixel is assigned to each PE, the algorithm presented here is scalable and can assign m$\times$m pixel set to each PE according to the input image size. The assigned pixel set is converted to a single pixel that has representative value, and the amount of the required memory and processing time can be highly reduced. For N$\times$N image, if m$\times$m pixel set is assigned to each PE of P$\times$P mesh, where P=N/m, the time complexity due to the communication of each PE and the computation complexity are reduced to O(PlogP) bit operations and O(P) bit operations, respectively, which is 1/m of each of the conventional method. This method also diminishes the amount of memory in each PE to O(P), and can decrease the number of PE to O(P2) =Θ(N2/m2) as compared to O(N2) of conventional method. Because the proposed parallel labeling algorithm is scalable, we can adapt to the increase of image size without the hardware change of the given mesh connected SIMD computer.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2201-2203
• /
• 1999

In this study, we have designed and manufactured not a present elliptic cavity but a circular cavity and we have experimented the operational characteristics. As a result, we obtained the maximum efficiency of 2.1 %. It didn't have any difference compared with elliptic cavity. A circular cavity is much more compact, so far easier to be manufactured than a elliptic cavity. And it can be made at a low cost. At the input energy, parameter $\alpha$, input voltage, and pulse width were in the same condition, we have decided to the optimization of the mesh number of a parallel-mesh circuit which was connected with main power supply.

• 한국CDE학회논문집
• /
• 제2권3호
• /
• pp.175-185
• /
• 1997

Given the widespread use of the Finite Element Method in strength analysis, automatic mesh generation is an important component in the computer-aided design of parts and assemblies. For a given resolution of geometric accuracy, the purpose of mesh generators is to discretize the continuous model of a part within this error limit. Sticking to this condition often produces many small elements around small features in spite that these regions are usually of little interest and computer resources are thus wasted. Therefore, it is desirable to selectively suppress small features from the model before discretization. This can be achieved by low-pass filtering a CAD model. A spatial function of one dimension higher than the model of interest is represented using the Fourier basis functions and the region where the function yields a value greater than a prescribed value is considered as the extent of a shape. Subsequently, the spatial function is low-pass filtered, yielding a shape without the small features. As an undesirable effect to this operation, all sharp corners are rounded. Preservation of sharp corners is important since stress concentrations might occur there. This is why the LPF (low-pass filtered) model can not be directly used. Instead, the distances of the boundary elements of the original shape from the LPF model are calculated and those that are far from the LPF model are identified and removed. It is shown that the number of mesh elements generated on the simplified model is much less than that of the original model.