• Ocean and Polar Research
• /
• v.42 no.4
• /
• pp.283-292
• /
• 2020

Oncaea prendeli Shmeleva, 1966 is redescribed here based on a specimen collected using a fine-mesh net in the epipelagic layer in the south sea of Jeju Island, Korea. The Korean specimen is generally similar to Mediterranean specimens in terms of morphological characteristics, but it shows a few minor differences in a slightly larger length-to-width ratio for the distal endopod segment of the antenna, a relatively shorter caudal seta IV, and additional ornamentation on the maxillule and maxilla. This species is distinguishable from the most similar congeneric species, O. tregoubovi Shmeleva, 1968, and three species of the genus Spinoncaea Böttger-Schnack, 2003 by the distal and lateral armature of the antenna, ornamentation on the female maxilliped, spine number on the endopod of leg 2, and proportional length of setae on the caudal ramus. Moreover, spine lengths on the exopods of legs 2-4 are proposed as new morphological characters for the identification of congeners. This is the first record of O. prendeli in Korean waters.

• Journal of Aerospace System Engineering
• /
• v.16 no.3
• /
• pp.63-72
• /
• 2022

The purpose of this paper was to understand the dynamics of deployment of large mesh antennas, and to provide a numerical method for determining the dynamic stiffness and the driving forces for the design. The deployment structure was numerically modeled using the frame elements. The eigenvalue analysis was demonstrated, with respect to the folded and unfolded configurations of the antenna. A multibody dynamic model was formulated with Kane's equation, and simulated using the pseudo upper triangular decomposition (PUTD) method for resolving the constrained problem. Based on the multibody model, the kinetics of the deployment, the motor driving forces, and the feasibility of the designed deployment structure were investigated.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.5
• /
• pp.163-168
• /
• 2019

In this paper, We investigated the effects of the transparency variations from 0% to 90.7% on meshed SF-MPAA(Series Fed Microstrip Patch Array Antenna). For this, we designed SF-MPAA in 3 cases that is meshed radiation patches, meshed GND, and meshed radiation patches plus GND. And we investigated the characteristics of SF-MPAA depend on the variations of transparency in each case. In the case of meshed radiation patches, the gain decreased by 18.8% and the operating frequency is lower by 5.5%. In the case of meshed GND, the gain decreased by 15.4% and the operating frequency is lower by 5.56%. In the case of meshed radiation patches plus GND, the gain decreased by 31.94% and the operating frequency is lower by 7.6%. However, the bandwidth and the SLL(Side Lobe Level) did not show apparent tendency on the the variations of transparency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.2B
• /
• pp.120-129
• /
• 2012

Wireless mesh network (WMN) has recently emerged as a promising technology for tactical operation. If a platoon is organized with MPs, this system is suitable for tactical coverage is given for battle field where there is a shortage of wired infrastructure. However, MPs of typical WMN are generally fixed. This condition does not apply to diverse tactical scenarios. In this paper, it is considered that MPs have group mobility for flexible tactical networks. We propose cluster based multi-channel MAC scheme for mobilie WMN with single antenna condition. We have reduced the collision problems and message storming problems occur by mobility, so the reliability of WMN has been improved. Consequently, reliable communication is guaranteed by our framework in mobile WMN.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1469-1476
• /
• 2015

We propose a beam selection algorithm that improves inter sector SIR using a code-book of a circular array antenna in multi-sector wireless mesh network environments. The proposed method improves SIR using a combination of fed back code-book and guarantees QoS of all nodes. Computer simulation exhibits the proposed scheme demonstrates 4.42dB higher SIR than that of the conventional code-book method, QoS with proportional fair is improved by 1.70dB and fact that all nodes are satisfied Qos is also shown.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.10
• /
• pp.691-699
• /
• 2022

Large aperture antennas with long focal lengths in space have important application for telecommunications, Earth observation and science missions. This paper aims to understand the dynamics of deployment of large mesh antennas and to provide a multibody model for determining the driving forces for the design of reflectors and booms. The modular deployable reflector and boom are designed based on the deployment unit cell. A multibody dynamic model is formulated with Kane's equation and simulated using the pseudo upper triangular decomposition (PUTD) method for solving the constrained problem. Based on the multibody dynamic model, the kinetics of the deployment, the motor driving forces, and the structural dynamic deformation are investigated.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.4
• /
• pp.643-652
• /
• 1998

This paper presents the characteristics of a relay station antenna with the newly designed back-plate structure which is composed of the U-shaped metal plate for suppression of the back lobe by edge diffraction. The back lobe level of the conventional type was about -20 dB in the -z direction ( 180 ) . In order to improve the characteristics, the U-shaped mesh type metal plate is considered, where the design condition of the model antenna satisfies the wide null point angle range with the back lobe level of -30 dB below in the -z direction. The design parameters with the minimum back lobe level such as the dipole length, the distance between dipole elements and the back plate size have been found by using the released NEC Win Pro code. The calculated and measured back lobe Bevel of model antenna have been obtained 48.48 dB and -45 dB at 325 MHz, respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.6
• /
• pp.664-671
• /
• 2010

In this paper, we developed a Zigbee module based on CC2520 which is possible to construct the mesh network and also support to Zigbee Pro standard as a preceding research of autonomous moving of mobile robot using Zigbee. After manufacturing the Zigbee module, we selected antenna to fit Zigbee wireless frequency band using network analyze as means performance improvement. We also carry out an impedance matching of Zigbee module, extend the possible distance of two-way wireless communication and ensure the safety of communication.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1993.10a
• /
• pp.81-90
• /
• 1993

The optimum design of a structure requires the determination of the economical member size and shape of the structure which satisfies the design condition and function. In this study, the process of design automatization of three-dimensional truss structure introduces the optimization technique tests its application in the design automatization, proposes its application method and applies the example structure of the parabolic antenna truss. Using the Formex Algebra of configuration function, the structure's mesh-generation is automatized. By using the program developed in this study, the input member array, member size and load condition designer can generate the input data file for the structure analysis and optimum design. This study is aimed at the development of a design automatization system that search for tile optimum value of a structure design by observing the structure's sensitivity from the modification of member array and member property.

• Ocean and Polar Research
• /
• v.40 no.1
• /
• pp.23-35
• /
• 2018

A small cyclopoid copepod M. subtilis (Giesbrecht, 1893 ["1892"]) belonging to the genus Monothula $B{\ddot{o}}ttger-Schnack$ and Huys, 2001 was collected by using $60{\mu}m$ mesh net and firstly recorded in the epipelagic layer of the equatorial Pacific Ocean. We redescribed its morphological characteristics for both female and male, comparing with those of previous studies. Specimens of M. subtilis from the equatorial Pacific Ocean differ from those previously reported by others in terms of the length of the seta G on antenna, being much shorter than setae E and F; in the distal spine on the swimming leg 4, being longer than the length of the third segment on P4. The outer spine of the P3 enp-3 in male is slightly over the tip of conical process. The spine lengths of the distal endopods of P2-P4 for both sexes showed variations among individuals, and the proportions of spine lengths in female are higher than those in male.