• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.4
• /
• pp.476-483
• /
• 2003

A mathematical model is presented to predict the two-phase flow and heat transfer phenomena of the evaporating extended meniscus region in a micro-channel. The pressure difference at the liquid-vapor interface can be obtained by the augmented Laplace-Young equation. The correlative equations for film thickness, pressure, and velocity in the meniscus region are derived by applying the mass, momentum, and energy equations into the control volume. The results show that increasing the heat flux and the liquid inlet velocity cause the length and liquid film thickness of the extended meniscus region to decrease. The variation, however, of the heat flux and liquid inlet velocity has no effect on the profile of film thickness. The majority of heat is transferred through the thin film region that is a very small region in the extended meniscus region. It is also found that the vapor velocity increases gradually in the meniscus region. However, it increases sharply at the junction of the meniscus and thin film regions.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.4
• /
• pp.455-460
• /
• 2012

The Electrostatic Inkjet system has many applications in cost and time effective manufacturing of printed electronics like RFIDs, OLEDs and flexible displays etc. This paper presents pneumatic ink supply system for an electrohydrodynamic deposition (EHD) setup for the precise pressure control to produce a small amount of discharge at the end of the capillary. The meniscus shape depends upon the applied pneumatic pressure to the ink supply system. Furthermore, this paper also compares meniscus shapes at different applied pneumatic pressures. It is concluded that patterning of constant line-width can be achieved better by controlling the meniscus shape using this technique.

• Journal of the Korean Arthroscopy Society
• /
• v.3 no.1
• /
• pp.54-61
• /
• 1999

The current treatment of extensive meniscal injuries has resulted in numerous investigations and clinical trials to restore normal meniscal functions. A cryopreserved meniscal allograft transplantation is one of the successful methods available to restore the meniscus. All the procedures of 26 cases were performed in an minimal open fashion, though initial four cases were done with the aid of arthroscope. In all of the grafts, we used a bone bridge which was attached to meniscus for better stability and healing. Anterior cruciate ligament reconstructions were also performed simultaneously with the meniscal procedures. We attempted to minimize articular cartilage by employing so called the "Key-hole technique" for the medial meniscus transplantation. First, the meniscal cartilage bone bridge was shaped into a cylinder and a bone tunnel was made just beside the medial border of the anterior criciate ligament insertion of the recipient knee joint, and the bone bridge of the meniscal cartilage was push to press-fit. The inserted meniscal cartilage was sutured by the usually employed technique under arthroscopic control. The lateral meniscus was shaped different to the medial meniscus in that the bone bridge was semicylindrical and the bone trough was made beside the lateral border of the anterior criciate ligament insertion of the recipient knee joint. The meniscus was put into the bone trough and the leading suture was extracted anterior to the tibia and tied the knot. The inserted meniscus was sutured in the same manner as the medial meniscus transplantation. By the above described method, the authors were able to minimize the articular cartilage invasion and transplant the meniscus with relative accuracy.

• The korean journal of orthodontics
• /
• v.21 no.1 s.33
• /
• pp.53-76
• /
• 1991

The study was designed to analyse the reorganization of the rabbit TMJ meniscus which was anteriorly displaced by surgery. The author compared the anteriorly displaced groups with control group. After surgical opening of the left rabbit TMJ space, cut the posterior attachment of the meniscus, and pushed it under the undercut area of the condyle head. Experimental groups were sacrificed by 1, 2, 4, 8 weeks after surgery. The samples were analysed with light microscope under T-B stain and electron microscope. The results were as follows: 1) The rabbit TMJ meniscus consisted of thick anterior and posterior band running different way, and comparative thin intermediate band runining antero-posteriorly. 2) Round oval shape chondrocyte-like cells were imbeded between the collagen fiber bundles and composed of proteoglycan granules, that showed metachromasia with toluidine blue, around the cell matrix. 3) Type II collagen fiber bundles in experimental group occured degenerative changes in organic patterns at 8 weeks, but those of type I collagen fiber bundles sustained longer, 4) The typical fibrocartilage of the rabbit TMJ meniscus was changed into fibrotic mode in process of time and showed the degenerative changes, which contained hyperplasia, calcification, resorption and hyalinization in the connective tissue. 5) The hyperplastic change of the synovial membrane in 4 week group and transitional change from fibrocyte to chondrocyte in cell type in 8 week group were observed. 6) The diameters of collagen fibers were diminished with the degenerative changes, the shape of the fibers became wavier and more nonorganic in running pattern and fiber bundle spaces widened.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.5 no.2
• /
• pp.155-160
• /
• 2006

Purpose: To evaluate the results of meniscal repair and partial meniscectomy of lateral meniscus injury associated with tibial plateau fracture. Materials and Methods: Between February 1993 and August 2004, 24 cases (23 patients) of lateral meniscus tear with tibial plateau fracture were evaluated retrospectively. The most frequent type of tear was the longitudinal tear of the meniscocapsular junction (14 cases, 66.7%). All fractures were reduced under the control of arthroscopic and image intensifier. Arthroscopic repair of the longitudinal tear of the lateral meniscus or arthroscopic partial meniscectomy was performed. The final results were evaluated with the Ikeuchi criteria and Lysholm score. Results: At the final follow-up, the outcome was excellent in 12 cases (85.7%), good in 1 case (7.1%) and fair in 1 case (7.1%) among 14 cases of meniscal repair, and the excellent in 4 cases (66.7%) and good in 2 cases (33.3%) among 6 cases of partial meniscectomy according to the Ikeuchi criteria, There was a significant improvement of Lysholm score after surgery, 92.3 postoperatively compared with 56.6 preoperatively (p<0.0001, paired t-test). Conclusion: The fracture of the lateral tibial plateau did not seem to affect on the healing of the meniscus repair and partial meniscectomy.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.612-615
• /
• 1996

In the continuous casting process, molten metal contacts the mold wall and the molten metal surface is subject to the mold oscillation. The mold oscillation results in the oscillation marks on the surface of solidified steel, which has undesirable effects on the quality of slabs. In order to reduce the oscillation marks by achieving soft contact of molten metal with the mold surface, alternating magnetic field is applied to the surface of molten metal. However, if the magnetic field strength becomes too strong, the melt flow induced by the magnetic field. causes the instability of the molten metal surface, which has also the bad influence on the slab quality. Therefore, it is very important to choose the optimal position of the inductor coil and the optimal level of electric power to minimize the surface defects. In the present work, as a first step toward the optimization problem of the process, numerical studies are performed to investigate the effects of coil position and the electric power level on the meniscus shape and the flow field. As numerical tools, the boundary integral equation method(BIEM) is used for the magnetic field analysis and the finite difference method (FDM) with orthogonal grid generation is used for the flow analysis.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.8
• /
• pp.1441-1444
• /
• 2007

This paper presents a novel electrostatic drop-an-demand ejector with a conductive pole inside nozzle. The MEMS fabricated pole-type nozzle shows a significant improvement in the performance and reliability of forming meniscus and generating a micro dripping mode of droplet out of the meniscus. It is verified experimentally that the use of the pole-type nozzle. The liquid is used D20+SDS+SWNT (5 %wt). The gap between upper electrode and nozzle is about 600 um. Electrostatic drop-an-demand ejection is observed when a DC voltage of 1.5 kV is applied between the control electrode and ground electrode. Droplet diameter is $100{\mu}m$.

• Clean Technology
• /
• v.20 no.2
• /
• pp.97-102
• /
• 2014

Currently various studies are underway for dispensing high-viscosity phosphor. These studies have reported limitations and challenges in the dispensing process. The discharged amount of phosphor was approximately the same each time which is important for the implementation of high-efficiency white LED technology. This paper present high-viscosity phosphor dispensing process for white LED implementation by using electrostatic printing technology. The voltage controlled DOD (Drop-On-Demand) discharge experiment was studied to determine angle of drop meniscus at nozzle and dot diameter. With increase in Discharge voltage, the discharge angle of meniscus increased while dot diameter decreased. Therefore it can be concluded that we can control the discharge rate by controling the discharge angle of meniscus.

• Journal of Korea Foundry Society
• /
• v.23 no.5
• /
• pp.257-267
• /
• 2003

In early solidification during the continuous casting of steel slabs, the formation of oscillation marks on the surface of slabs was mainly affected by carbon contents and casting conditions. The control of oscillation mark is required for the HCR(Hot Charged Rolling) process because the deep oscillation marks seriously deteriorate the surface qualities of steel slabs. The metallographic study has revealed that the oscillation mark can be classified principally according to the presence or absence of a small 'subsurface hook' and the depth of the oscillation marks in the subsurface structure at the basis of individual oscillation marks. The subsurface hook of oscillation marks was either straight or curved. When the amount of overflow was small and the subsurface hook was formed in the top of oscillation marks, the subsurface hook was straight and the oscillation mark was shallow. The oscillation marks without subsurface hook have small early solidification shell and were formed wide. The actual negative strip time$(t_N)$ was changed by the effect of meniscus level fluctuation Therefore irregular early solidification shell and oscillation mark were formed.

• The Korea Journal of Herbology
• /
• v.32 no.2
• /
• pp.41-47
• /
• 2017

Objective : The aim of this study is to investigate anti-arthritis activity using a korea's natural monument No. 265 designate 'Yeonsan-Ogye'. In this study, research by using extracts from different concentration of the Yeonsan-Ogye through an MIA-induced arthritis animal model was being conducted in vivo and scientifically verifying the efficacy of medicinal food. Methods : Yeonsan-Ogye was administered 500 mg/kg/day, 1000 mg/kg/day, 2000 mg/kg/day to SD-Rat, where arthritis was induced by monosodium iodoacetate (MIA) at $60mg/m{\ell}$. MMP-9, COMP, CTXII, calcitonin and glycosaminoglycan level in serum were measured by ELISA. The changes of relative hind paw weight bearing ratio by Incapacitance Test Meter and The cartilage of meniscus volume was examined and 3-D high-resolution reconstructions of the cartilage of meniscus were obtained using a Micro-CT system. Also, the histopathological analysis of knee was observed by H&E and safranin-O staining. Results : Production of MMP-9, COMP (all groups) and CTXII (500, 1000 mg/kg/day) level in serum was decreased, respectively, in comparison with control. The other way, production of calcitonin (500, 1000 mg/kg/day) and glycosaminoglycan (all groups) level in serum, Hind paw weight bearing ratio (all groups) was increased, espectively, in comparison with control. The cartilage of patella volume in micro-CT increased significantly. In addition, all groups showed a increase in the cartilage volume and proteoglycan. Conclusion : The results for Yeonsan-Ogye showed significant antiarthritis activity in serum and the cartilage. Therefore, it is thought to be that Yeonsan Ogye can be utilized as a variety of new korea medicie and health foods against arthritis diseases.