• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.7
• /
• pp.68-80
• /
• 2002

An approach for composing a performance optimized computational code is suggested for latest microprocessors. The concept of the code optimization, called here as localization, is maximizing the utilization of the second level cache that is common to all the latest computer system, and minimizing the access to system main memory. In this study, the localized optimization of LU-SGS (Lower-Upper Symmetric Gauss-Seidel) code for the solution of fluid dynamic equations was carried out in three different levels and tested for several different microprocessor architectures most widely used in these days. The test results of localized optimization showed a remarkable performance gain up to 7.35 times faster solution, depending on the system, than the baseline algorithm for producing exactly the same solution on the same computer system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.80-80
• /
• 1998

RU02 박막은 전이금속으로서 rutile 구조이며, 넓은 온도 영역에서 금속성의 를 나타내고, 700도 이상의 높은 온도에서 열적 안정성을 갖는 물질이다 이러한 특성 때문 에 RU02 박막은 실리콘 디바이스에서 배선 게이트 전극 확산 장벽 등에 응용가능성이 높 은 물질로 각광을 받고 있다- 특히 다결정 RU02 박막은 DRAM (dynamic random access m memory) 내의 강유전성 축전기의 전극으로서 유망한 물질이다. 지금까지 이러한 응용분야에 사용된 전극물질은 pt 금속이었다 그러나 이러한 금속전극은 SI 산소 그리고 강유전체의 구성물질 등과의 상호확산, pt 표면의 hillock의 존재로 생기는 전기적 단락, 기판과의 나쁜 점작성, 어려운 에칭 프로세스 등의 단점을 가지고 있다 더욱 더 심각한 문제는 P Pt'ferroelectric/Pt 구조에서 나타나는 aging과 fatigue인데, 이는 108 사이쿨 이후에 스위칭 가 능한 잔류 pOlarization 으$\mid$ 감소를 유발하게 된다- 최근 Berstein은 Pt 대신에 RU02를 사용함으로써 강유전체 축전기에서의 fatigue 현상을 크게 감소시켰다고 보고 한 바 있다 Burst川도 RU02 가 실리콘 표면과 유전체 물질 사이에 전기전도 어떠한 상호 확산도 일어나지 않음을 보였다. 그러나 이러한 연구 결과에도 증착조건과 RU02 박악의 특성에 관한 상호 관계가 충분히 더욱 더 중은 강유전성 박막올 만들기 위해서는 이러한 박막 전극에 않고 있다 연구되지 대한 상세한 연구가 반드시 필요하다고 본다. RU02 박막은 실리콘 기판 위에 고주파 마그네트론 스퍼터링 방법으로 증착하였다. 사용 한 타켓은 2 인치의 직경을 가지는 CERAC 사에서 제작한 Ruol다 초기 진공은 1O~6 Torr 이하였고, 고주파 전력은 20 - 80W 까지 변화시켰다 반응성 스퍼터링율 하기 위해 아르곤과 산소롤 주입하였고, 산소/(산소+아르곤)의 비를 변화시켰다 기판의 온도와 증착압력은 각각 상온에 서 500도까지 , 5mTorr에 서 100mTorr 까지 변 화시 켰 다 RU02 박막의 결정성을 조사하기 위해 XRD 표면 형상과 단면을 조사하기 위해 SEM을 사용하였다‘ 박악의 비저항을 조사하기 위해 4-단자법 van der Pauw 방법을 사용하였다. RU02 박막은 증착압력이 높을수록 비저항은 높아지고, 두께는 감소하였다. 특히 1 100mTorr에서는 작업가스와 스퍼터된 입자사이의 심각한 산란 때문에 아예 증착이 이루어 지지 않았다‘ RF 전력이 증가할수록 비저항이 낮아졌다. 이는 두께에 의존하는 결과이며 전형적인 금속박막에서 나타나는 현상과 유사함을 알 수 있었다- 기판온도와 작업가스의 산소 분압이 높을수록 비저항이 감소하였다‘ 이러한 사실은 성장한 박악의 결정구조와 밀접한 관련이 있음을 보여준다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.10
• /
• pp.1862-1878
• /
• 2011

With the advances in wireless communication technology and the advent of smartphones, research on location-based services (LBSs) is being actively carried out. In particular, several spatial index methods have been proposed to provide efficient LBSs. However, finding an optimal indexing method that balances query performance and index size remains a challenge in the case of wireless environments that have limited channel bandwidths and device resources (computational power, memory, and battery power). Thus, mechanisms that make existing spatial indexing techniques more efficient and highly applicable in resource-limited environments should be studied. Bitmap-based Spatial Indexing (BSI) has been designed to support LBSs, especially in wireless broadcast environments. However, the access latency in BSI is extremely large because of the large size of the bitmap, and this may lead to increases in the search time. In this paper, we introduce a Selective Bitmap-based Spatial Indexing (SBSI) technique. Then, we propose an Adaptive Bitmap-based Spatial Indexing (ABSI) to improve the tuning time in the proposed SBSI scheme. The ABSI is applied to the distribution of geographical objects in a grid by using the Hilbert curve (HC). With the information in the ABSI, grid cells that have no objects placed, (i.e., 0-bit information in the spatial bitmap index) are not tuned during a search. This leads to an improvement in the tuning time on the client side. We have carried out a performance evaluation and demonstrated that our SBSI and ABSI techniques outperform the existing bitmap-based DSI (B DSI) technique.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.56-56
• /
• 2011

투명 메모리 소자는 향후 투명 디스플레이 등 투명 전자기기와 집적화해 통합형 투명 전자시스템을 구현을 위해 지속적으로 연구가 진행 되고 있으며, 산학계에서는 다양한 메모리 소자중 큰 밴드-갭(>3 eV) 특성을 가지는 저항 변화 메모리(Resistive Random Access Memory, ReRAM)를 이용한 투명 메모리 구현 가능성을 지속적으로 보고하고 있다. 현재까지의 저항 변화 메모리 연구는 물질 최적화를 위해 다양한 금속-산화물계(Metal-Oxide) 저항 변화 물질에 대한 연구가 활발하게 진행 되고 있지만, 금속-산화물계 물질의 경우 근본 적으로 그 제조 공정상 산소에 의한 다수의 산소 디펙트 형성과 제작 시 쉽게 발생할 수 있는 표면 오염의 문제점을 안고 있으며, 또한 Endurance 및 Retention 등의 신뢰성에 문제를 보이고 있다. 따라서, 이러한 문제점을 근본 적으로 해결하기 위해 새로운 저항 변화 물질에 관한 물질 최적화 연구가 요구 되며, 본 연구진은 다양한 금속-질화물계(Metal-Nitride) 물질을 저항변화 물질로 제안해 연구를 진행 하고 있다. 이전 연구에서, 물질 고유의 우수한 열전도(285 W/($m{\cdot}K$)) 및 절연 특성, 큰 밴드-갭(6.2 eV), 높은 유전율(9)을 가지고 있는 금속-질화물계 박막인 AlN를 저항변화 물질로 이용하여 저항변화 메모리 소자 연구를 진행하였으며, 저전압 고속 동작 특성을 보이는 신뢰성 있는 저항 변화 메모리를 구현하였다. 본 연구에서는 AlN의 큰 밴드-갭 특성을 이용하여 투명 메모리 소자를 구현하기 위한 연구를 진행 하였다. 투과도 실험 결과, 가시광 영역 (380-700 nm)에서 80% 이상의 투과도를 보였으며, 이는 투명 메모리 소자로써의 충분한 가능성을 보여 준다. 또한, I-V 실험에서 전형적인 bipolar 스위칭 특성을 보이며, 스위칭 전압 및 속도는 VSET=3 V/Time=10 ns, VRESET=-2 V/Time=10ns에서 가능하였다. 신뢰성 실험에서, 108번의 endurance 특성 및 105 초의 retention 특성을 보였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.132-132
• /
• 2011

For the programming volume of PRAM, Ge2Sb2Te5(GST) thin films have been dominantly used and prepared by physical vapor deposition (PVD), chemical vapor deposition (CVD), atomic layer deposition (ALD). Among these methods, ALD is particularly considered as the most promising technique for the integration of PRAM because the ALD offers a superior conformality to PVD and CVD methods and a digital thickness control precisely to the atomic level since the film is deposited one atomic layer at a time. Meanwhile, although the IST has been already known as an optical data storage material, recently, it is known that the IST benefits multistate switching behavior, meaning that the IST-PRAM can be used for mutli-level coding, which is quite different and unique performance compared with the GST-PRAM. Therefore, it is necessary to investigate a possibility of the IST materials for the application of PRAM. So far there are many attempts to deposit the IST with MOCVD and PVD. However, it has not been reported that the IST can be deposited with the ALD method since the ALD reaction mechanism of metal organic precursors and the deposition parameters related with the ALD window are rarely known. Therefore, the main aim of this work is to demonstrate the ALD process for IST films with various precursors and the conformal filling of a nano size programming volume structure with the ALD?IST film for the integration. InSbTe (IST) thin films were deposited by ALD method with different precursors and deposition parameters and demonstrated conformal filling of the nano size programmable volume of cell structure for the integration of phase change random access memory (PRAM). The deposition rate and incubation time are 1.98 A/cycle and 25 cycle, respectively. The complete filling of nano size volume will be useful to fabricate the bottom contact type PRAM.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.353-353
• /
• 2011

Titanium dioxide is a suitable material for industrial use at present and in the future because titanium dioxide has efficient photoactivity, good stability and low cost [1]. Among the three phases (anatase, rutile, brookite) of titanium dioxide, the anatase form is particularly photocatalytically active under ultraviolet (UV) light. In fabrication of photocatalytic devices based on catalytic nanodiodes [2], it is challenging to obtain a photocatalytically active TiO2 thin film that can be prepared at low temperature (< 200$^{\circ}C$). Here, we present the synthesis of a titanium dioxide film using TiO2 nanoparticles and sol-gel methods. Titanium tetra-isopropoxide was used as the precursor and alcohol as the solvent. Titanium dioxide thin films were made using spin coating. The change of atomic structure was monitored after heating the thin film at 200$^{\circ}C$ and at 350$^{\circ}C$. The prepared samples have been characterized by X-ray diffraction (XRD), scanning electron microcopy, X-ray photoelectron spectroscopy, transmission electron microscopy, ultraviolet-visible spectroscopy (UV-vis), and ellipsometry. XRD spectra show an anatase phase at low temperature, 200$^{\circ}C$. UV-vis confirms the anatase phase band gap energy (3.2 eV) when using the photocatalyst. TEM images reveal crystallization of the titanium dioxide at 200$^{\circ}C$. We will discuss the switching behavior of the Pt /sol-gel TiO2 /Pt layers that can be a new type of resistive random-access memory.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.9
• /
• pp.4122-4143
• /
• 2018

Because of the increment in network scale and test expenditure, simulators gradually become main tools for research on key problems of wireless networking, such as radio resource management (RRM) techniques. However, existing simulators are generally event-driven, causing unacceptably large simulation time owing to the tremendous number of events handled during a simulation. In this article, a mass-processing framework for RRM simulations is proposed for the scenarios with a massive amount of terminals of Internet of Things accessing 5G communication systems, which divides the time axis into RRM periods and each period into a number of mini-slots. Transmissions within the coverage of each access point are arranged into mini-slots based on the simulated RRM schemes, and mini-slots are almost fully occupied in dense scenarios. Because the sizes of matrices during this process are only decided by the fixed number of mini-slots in a period, the time expended for performance calculation is not affected by the number of terminals or packets. Therefore, by avoiding the event-driven process, the proposal can simulate dense scenarios in a quite limited time. By comparing with a classical event-driven simulator, NS2, we show the significant merits of our proposal on low time and memory costs.

• Korean Journal of Materials Research
• /
• v.27 no.1
• /
• pp.32-38
• /
• 2017

Insulating $TaN_x$ films were grown by plasma enhanced atomic layer deposition using butylimido tris dimethylamido tantalum and $N_2+H_2$ mixed gas as metalorganic source and reactance gas, respectively. Crossbar devices having a $Pt/TaN_x/Pt$ stack were fabricated and their electrical properties were examined. The crossbar devices exhibited temperature-dependent nonlinear I (current) - V (voltage) characteristics in the temperature range of 90-300 K. Various electrical conduction mechanisms were adopted to understand the governing electrical conduction mechanism in the device. Among them, the PooleFrenkel emission model, which uses a bulk-limited conduction mechanism, may successfully fit with the I - V characteristics of the devices with 5- and 18-nm-thick $TaN_x$ films. Values of ~0.4 eV of trap energy and ~20 of dielectric constant were extracted from the fitting. These results can be well explained by the amorphous micro-structure and point defects, such as oxygen substitution ($O_N$) and interstitial nitrogen ($N_i$) in the $TaN_x$ films, which were revealed by transmission electron microscopy and UV-Visible spectroscopy. The nonlinear conduction characteristics of $TaN_x$ film can make this film useful as a selector device for a crossbar array of a resistive switching random access memory or a synaptic device.

• Journal of the Korean Magnetics Society
• /
• v.16 no.3
• /
• pp.186-191
• /
• 2006

Ferromagnetic amorphous $Ni_{16}Fe_{62}Si_8B_{14}$ and $Co_{70.5}Fe_{4.5}Si_{15}B_{10}$ layers have been devised and incorporated as free layers of magnetic tunnel junctions (MTJs) to improve MRAM reading and writing performance. The NiFeSiB and CoFeSiB single-layer film exhibited a lower saturation magnetization ($Ms=800emu/cm^3,\;and\;560emu/cm^3$, respectively) compared to that of a $Co_{90}Fe_{10}(Ms=1400emu/cm^3)$. Because amorphous ferromagnetic materials have lower Ms than crystalline ones, the MTJs incorporating amorphous ferromagnetic materials offer lower switching field ($H_{sw}$) values than that of the traditional CoFe-based MTJ. The double-barrier MTJ with an amorphous NiFeSiB free layer offered smooth surface resulting in low bias voltage dependence, and high $V_h\;and\;V_{bd}$ compared with the values of the traditional CoFe-based MTJ.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.186-186
• /
• 2013

Nitrogen doped Ge-Sb-Te (N-GST) thin films for phase change random access memory (PRAM) applications were investigated by synchrotron-radiation-based x-ray photoelectron spectroscopy and absorption spectroscopy. Nitrogen doping in GST resulted in more favorable N atoms' bonding with Ge atoms rather than with Sb and Te atoms [1,2], which explains the higher phase change transition temperature than that of undoped Ge-Sb-Te thin film. Surprisingly, it was noticed that N atoms also existed in the form of molecular nitrogen, $N_2$, which is detrimental to the stability of the GST performance [3]. N-doped GST experimental features were also supported by ab-initio molecular dynamic calculations [2]. References [1] M.-C. Jung, Y. M. Lee, H.-D. Kim, M. G. Kim, and H. J. Shin, K. H. Kim, S. A. Song, H. S. Jeong, C. H. Ko, and M. Han, "Ge nitride formation in N-doped amorphous Ge2Sb2Te5", Appl. Phys. Lett. 91, 083514 (2007). [2] Zhimei Sun, Jian Zhou, Hyun-Joon Shin, Andreas Blomqvist, and Rajeev Ahuja, "Stable nitride complex and molecular nitrogen in N doped amorphous Ge2Sb2Te5", Appl. Phys. Lett. 93, 241908 (2008). [3] Kihong Kim, Ju-Chul Park, Jae-Gwan Chung, and Se Ahn Song, Min-Cherl Jung, Young Mi Lee, Hyun-Joon Shin, Bongjin Kuh, Yongho Ha, Jin-Seo Noh, "Observation of molecular nitrogen in N-doped Ge2Sb2Te5", Appl. Phys. Lett. 89, 243520 (2006).