[ $MIEX^{(R)}$ ]와 응집에 의한 분자량 크기별 제거특성에서는 10 kDa 미만의 유기물질에 대해서는 $MIEX^{(R)}$ 처리가 우수한 제거능을 나타내었으나, 10 kDa 이상의 유기물질은 응집 공정에서 높은 제거능을 가지는 것으로 나타났다. 막의 공극 크기에 대한 투과 flux 실험결과 UF 공정에 비하여 MF 공정에서의 투과 flux 감소율이 낮게 나타나고 있으며, MF 공정에 적용된 전처리 공정중 $MIEX^{(R)}+MF$ 공정의 경우 응집+MF 공정에 비하여 투과 flux 감소율이 낮게 나타나고 있다. $MIEX^{(R)}+UF$ 공정의 경우 입자상 물질의 존재 유무에 상관없이 flux 감소율은 거의 유사하게 나타났으나, 응집+UF 공정의 경우에는 용존성 유기물질만이 존재하는 시수에 비하여 입자상 물질이 존재하는 경우 투과 flux 감소율은 작게 나타났다. 응집 공정의 적용 후 다양한 입도분포 변화가 발생하였으며, pH 7에서 $MIEX^{(R)}$ 입자의 제타전위 측정결과 $MIEX^{(R)}$ 입자의 전하는 평균 -2.3 mV로 나타나 전기화학적으로 입자상 물질의 흡착이 가능하며 $MIEX^{(R)}$가 침전됨에 따라 입자상 물질이 sweep되어 입도분포 변화를 보였다.
Cost effective clay adsorptive microfiltration membranes were synthesized to remove Cr (III) from high polluted water. Raw and calcined bentonite were mixed in order to decrease the shrinkage and also increase the porosity; then, 20 wt% of carbonate was added and the samples, named B (without carbonate) and B-Ca20 (with 20 wt% calcium carbonate) were uniaxially pressed and after sufficient drying, fired at $1100^{\circ}C$ for 3 hours. Then, physical and mechanical properties of the samples, their phase analyses and microstructure and also their ability for Cr(III) removal from high polluted water (including 1000 ppm Cr (III) ions) were studied. Results showed that the addition of calcium carbonate lead the porosity to increase to 33.5% while contrary to organic pore formers like starch, due to the formation of wollastonite, the mechanical strength not only didn't collapse but also improved to 36.77 MPa. Besides, sample B-Ca20, due to the presence of wollastonite and anorthite, could remove 99.97% of Cr (III) ions. Hence, a very economic and cost effective combination of membrane filtration and adsorption technology was achieved for water treatment which made microfiltration membranes act even better than nanofiltration ones without using any adsorptive nano particles.
정밀여과 모세관 막을 이용한 무기 콜로이드 현탁액의 투과유속 감소특성을 검토하였다. 무기 현탁입자의 종류에 따른 투과거동은 알루미나 현탁액의 투과유속이 벤토나이트 현탁액보다 평균 2배정도 컸으며, 운전시간 경과에 따른 투과유속의 감소도 알루미나 현탁액이 벤토나이트 현탁액에 비하여 전체적으로 서서히 감소하는 경향을 보였다. 운전 시간 10분까지의 투과유속 감소율을 나타내는 초기투과유속 감소율은 벤토나이트 현탁액이 알루미나 현탁액보다 더 컸다. 막 투과유속 감소는 케익오염과 세공막힘오염에 기인하며, 막오염 형태에 있어 벤토나이트 현탁액의 세공막힘오염이 알루미나 현탁액 보다 현저히 크게 나타났다. 운전압력 $1.0\;kg_f/cm^2$에서 총 막오염에 대한 성분오염의 비율은 알루미나 현탁액의 경우 완전세공막힘 $9.35\%$, 표준세공막힘 $6.82\%$, 케익여과 $83.832\%$이었다. 순환흐름속도의 증가로 인해 투과유속은 증가하였고, 알루미나 현탁액은 $6.5\%$, 벤토나이트 현탁액은 $13.5\%$ 증가하였다. 세공크기가 $0.34\;{\mu}m$인 막의 투과유속은 세공의 크기가 $0.24\;{\mu}m$인 막보다 컸으며, 세공크기의 증가에 따른 투과유속은 알루미나 현탁액이 1.61배, 벤토나이트 현탁액이 1.76배 증가하였다.
다공성 분리막은 입자성 물질을 제거하는데 산업적으로 다양하게 응용되고 있다. 기존 다공성 분리막 제작 방법과 다르게, 용액퍼짐 상분리법은 매우 간단하게 기공을 형성할 수 있다. 먼저 지지층으로 메쉬 위에 물을 적신 후, 물과 혼합되지 않은 용매에 폴리설폰 용액을 흘려준다. 이때 물과 혼합되지 않은 용매는 쉽게 기화되어 폴리설폰은 얇은 막으로 만들어지게 된다. 기공을 형성하기 위해 폴리설폰 용액에 물과 혼합할 수 있는 물질을 넣게 되면, 넣어주는 농도 비율에 따라 기공크기를 조절할 수 있게 된다. 막의 두께는 쉽게 용액의 농도로 조절이 된다. 다공성 분리막은 메쉬의 형성을 그대로 유지하고 있어 3차원 구조체를 형성하는데 매우 유용하다. 본 연구에서 제시된 용액 퍼짐 상분리법은 매우 낮은 생산단가와 쉬운 공정조절에 의해 기존 분리막에 비해 높은 가격경쟁력을 가질 수 있는 특징을 보이고 있다.
본 실험에서는 십자형 흐름 정밀여과 모듈에서 분리막 투과시 막표면에 일어나는 입자층의 형성을 고속비디오 시스템으로 관찰하였다. 공칭세공이 0.2 {\mu}m$ 정밀여과막과 기공크기보다 휠씬 큰 100 내지 180{\mu}m$ 크기의 polyacryl-copolymer 0.05 wt%의 농도 용액을 제조하여 투과실험에서는 공급유속을 0.5, 0.75, 1.0, 1.25 그리고 1.5 cm/sec으로 변화시키면서 공급유속의 $20{\pm}3%$로 투과유량을 유지하였다. 공급유량이 증가할수록 입자가 보다 신속히 분리막 표면에 축적되는 것을 관찰할 수 있었고 공급유량이 낮은 0.5 cm/sec 에서는 입자층이 형성되지 않았다. 또한 입자층 형성 후 공급 유속을 1.88 cm/sec로 증가시키면 30초이내에 분리막 표면에 입자들이 대부분 제거됨을 확인하였다.
Polysulfone (PSf/NMP/alcohol 용액과 chlorinated poly(vinyl chloride) (CPVC)/THF/Alcohol 용액에 대한 광산란 패턴을 SALS (Small angle light scattering)와 FE-SEM (field emission scanning electron microscope)을 이용하여 조사하였다. PSf 용액에서는 시간에 따라 q값의 최대 산란 강도를 보이는 광산란 거동을 나타내어 스피노달 (SD) 상분리 거동을 나타내는 반면, CPVC 용액에서는 q값이 증가함에 따라 광산란 강도가 줄어드는 핵성장 (NG) 거동을 나타냈다. 각 고분자 용액에서 상분리 중반과 후반부에서 비용매 첨가제로 사용된 알코올의 탄소수가 증가할수록 농도분극의 증가율은 줄어들었다. 또한, SD에서의 초반부의 시간에 따른 산란 강도는 비용매 첨가제의 종류에 무관하게 Cahn의 건형 이론에 잘 부합되었다. 또한, SALS 장치로 얻어진 기공크기와 전자현미경으로 얻어진 영역 크기는 상호간에 비교되었다. 20PSf/70NMP/10n-butano1 (w/w%) 용액에 대한 산란 패턴은 초기 상분리 거동에서부터 후기 거동까지 매우 선명하게 관측되었고, 초반, 중반, 그리고 후반부에 대한 SD에 대한 이론적 결과와 잘 일치하였다. 최고의 산란강도를 나타낸 각도의 크기는 n-butanol>n-propanol>methanol>no alcohol 순으로 관찰되었으며, 이 순서로 최종 형성된 막 단면의 기공 크기가 감소되는 것으로 조사되었다.
Sai Zhang;Jianwen Ding;Ning Jiao;Shuai Sun;Jinyu Liu
Geomechanics and Engineering
/
제34권2호
/
pp.125-138
/
2023
To improve the understanding of infiltration characteristic of modified slurry and the support efficiency of filter cake in silty sand strata, the slurry infiltration (SI) and filter cake formation (FCF) were investigated in a laboratory apparatus. The water discharge and the excess pore pressure at different depths of silty sand strata were measured during SI. The relationship between permeability coefficient/thickness ratio of filter cake (kc/ΔL) and effective slurry pressure conversion rate of filter cake (η) were analyzed. Moreover, the SI and FCF process as well as the modification mechanism of CMC (carboxymethyl cellulose) were clarified. The experimental results indicate the formation of only external filter cake in the silty sand strata. The slurry particles obtain thicker water membrane after being modified by CMC, which blocks partial water path in filter cake and decreases the water discharge significantly. The silty sand excavated from tunnel face also contributes to the water discharge reduction. The kc of the external filter cake ranges from 3.83×10-8 cm/s to 7.44×10-8 cm/s. The η of the external filter cake is over 96%, which decreases with increasing kc/ΔL. A silty sand content within 10% is suggested during construction to ensure the uniformity of the filter cake.
분획분자량이 50,000인 acrylonitrile과 vinyl chloride의 공중합체 재질의 한외여과막(KOCH Membrane System, HF1-45-CM50)과 분획분자량이 100,000인 polysulfone 한외여과막(KOCH Membrane System, HF1-43-CM100)을 사용하여 순수에 3% 농도로 희석한 수용성 합성 절삭유의 투과특성을 연구하였다. 친수성 분리막인 HF1-45-CM50은 합성 절삭유의 투과실험에서 높은 투과유속과 오일성분 투과율을 보였으나 소수성 분리막인 HF1-43-CM100의 경우에는 오일 투과율은 HF1-45-CM50과 유사하였으나 투과유속은 훨씬 저하되었는데 이는 합성 절삭유가 소수성 막의 표면을 쉽게 적셔서 친수성 막에 비해 더 심한 막오염을 유발시킨다는 것을 의미한다. 또한 분리막 재질의 특성이 합성 절삭유의 투과특성에 미치는 영향이 분리막의 평균 기공크기의 영향보다 훨씬 더 크다는 사실을 알 수 있었다. 막오염을 감소시키기 위해 질소에 의한 역세척 실험을 수행한 결과 역세척 효과가 친수성 분리막에서는 뚜렷이 나타났으나 소수성 분리막의 경우에는 오히려 투과유속의 감소를 초래하였다. 폐합성 절삭유에 의해 오염된 분리막의 세척실험에서는 세척용액에 분리막을 72시간 이상 침지시킨 후 역세척을 수행할때 가장 높은 투과유속의 회복율을 얻을 수 있었다.
Poly(vinylidene fluoride) (PVDF) powder was treated with aqueous sodium hydroxide to obtain partially defluorinated fluoropolymers with expected properties such as improving hydrophilicity and fouling resistance. Raman spectrum and FT-IR results confirmed the existence of conjugated carbon double bonds after alkaline treatment. As the concentration increased, the degree of defluorination increased. The morphology and structure of membranes were examined. The permeation performance was investigated. The results showed that membrane's hydrophilicity increased with increase of the percentage of alkaline treated PVDF powder. Moreover, in terms of the water contact angle, it decreased from $92^{\circ}$ to a minimum of $68^{\circ}$; while water up take increased from 128 to 138%. Fluxof pure water and the cleaning efficiency increased with the increase of alkaline treated PVDF powder. The fouling potential also decreased with the increase of the percentage of alkaline treated PVDF powder. The reason that makes blending PVDF show different characteristics because of partial defluorination, which led the formation of conjugated C = C bonds and the inclusion of oxygen functionalities. The polyene structure followed by hydroxide attack to yield hydroxyl and carbonyl groups. Therefore, the hydrophilicity of blending membrane was improved. The SEM and porosity measurements showed that no obvious variations of the pore dimensions and structures for blend membranes were observed. Mechanical tests suggest that the high content of the alkaline treated PVDF result in membranes with less tolerance of tensile stress and higher brittleness. TGA results exhibited that the blend of alkaline treated PVDF did not change membrane thermal stability.
Vibrio vulnificus cytolysin has been incriminated as one of the important virulence determinants in V. vulnificus infection. In the present study, the effects of Vibrio vulnificus cytolysin on platelets were examined. Vibrio vulnificus cytolysin induced platelet aggregation and increased intracellular calcium concentration ($[Ca^{2+}]_i$) of rat platelets. These effects were abolished in $Ca^{2+}-free$ buffer (2 mM EGTA). Cytolysin also potentiated ADP-and collagen-induced platelet aggregation. Lanthanum (2 mM) inhibited cytolysin-diduced platelet aggregation. However, another $Ca^{2+}$ channel blockers, verapamil ($20{\;}{\mu}M$) or mefenamic acid ($20{\;}{\mu}M$) did not block cytolysin-induced platelet aggregation. Osmotic protectants, sucrose (50 mM) and raffinose (50 nM) suppressed platelet aggregation by 35.9% and 63.4%, respectively. V. vulnificus cytolysin increased membrane conductances of platelet membranes. These results suggest that cytolysin-induced platelet aggregation is mediated via lanthanum sensitive-calcium influx which resulted from the pore formation by V. vulnificus cytolysin.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.