• Membrane and Water Treatment
• /
• 제2권2호
• /
• pp.105-119
• /
• 2011

This study presents the tests of an Immersed Membrane BioReactor (IMBR) equipped with a draft tube and focuses on the influence of hydrodynamic conditions on membrane fouling in a pilot-scale using a hollow fiber membrane module of ZW-10 under ambient conditions. In this system, the cross-flow velocities across the membrane surface were induced by a cylindrical draft-tube. The relationship between cross-flow velocity and aeration strength and the influence of the cross-flow on fouling rate (under various hydrodynamic conditions) were investigated using Multi-Dimension Scaling (MDS) analysis. MDS technique is especially suitable for samples with many variables and has relatively few observations, as the data about Membrane Bio-Reactor (MBR) often is. Observations and variables are analyzed simultaneously. According to the results, a specialized form of MDS, CoPlot enables presentation of the results in a two dimensional space and when plotting variables ratio (output/input) rather than original data the efficient units can be visualized clearly. The results indicate that: (i) aeration plays an important role in IMBR performance; (ii) implementing the MDS approach with reference to the variables ratio is consequently useful to characterize performance changes for data classification.

• 상하수도학회지
• /
• 제25권4호
• /
• pp.565-572
• /
• 2011

The effects of chemical pretreatments on the excess sludge production in the membrane-coupled bioreactor were investigated. In addition, their effects on membrane fouling were also evaluated. Two membrane bioreactors were operated. In one reactor, a part of the mixed liquor was t reated with NaOH and ozone gas consecutively and was returned to the reactor. T he f lowrate of the chemical pretreatment stream was 1.5% of the influent flowrate. During the 200days of operation, the MLSS level in the bioreactor with mixed liquor pretreatment was maintained relatively constant at the range of 8,000 ~ 10,000$mg/{\ell}$ while it increased steadily up to 26,000 $mg/{\ell}$ in the absence of the pretreatment. Each reactor was equipped with two laboratory membrane modules where the flux for each module was 20, and 30 ${\ell}/m^2{\cdot}h$, respectively. With pretreatment, almost constant transmembrane pressure(TMP) was observed throughout the operation at the flux of 20 ${\ell}/m^2{\cdot}h$. Without pretreatment the membrane module at the same flux could also be operated at relatively stable condition. However, as the MLSS increases up to 25,000 $mg/{\ell}$, a fast TMP increase was observed. In conclusion, a complete control of excess sludge production in the membrane-coupled bioreactor was possible without significant deterioration of the treated water quality. In addition, it was shown that stable operation in terms of TMP is possible with sludge pretreatment and recirculation.

• 멤브레인
• /
• 제22권2호
• /
• pp.77-94
• /
• 2012

내열성, 용매 저항성의 특징을 갖는 다공성 세라믹 소재를 이용한 무기 멤브레인이 기체분리(수소 분리, 이산화탄소 분리 등), 액체 분리(수처리, 폐수처리, 유기용매 분리 등) 등 여러 가지 분야로 그 응용이 확대되고 있다. 본 논문에서는 다공성 세라믹 멤브레인의 소재, 제조 방법에 따른 멤브레인의 구조 제어 및 성능 평가에 관한 연구를 소개하고, 멤브레인의 세공 크기에 따른 구조, 멤브레인의 특성을 이용한 여러 가지 기체 분리 및 액체 분리에 관한 연구 동향을 정리하였다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.191-194
• /
• 2004

A novel type of intelligent microcapsule reactor system was prepared. The reactor can recognize pH change in the medea and control reaction rate by itself. For the reactor system, acrylic acid (AA), N-isopropylacrylamide (NIPAM), and glucose oxidase (GOD) were selected as a pH-responsive device, a gating device according and a reaction device, respectively. Poly(NIPAM-co-AA) (P-NIPAM-co-AA) are known to change its hydrophilicity-hydrophobicity due to pH change. They were integrated in a core-shell microcapsule space. GOD was loaded inside the core space and the pores in the outside shell layer were filled with P-NIPAM-co-AA linear grafted chains as pH-responsive gates by plasma graft filling polymerization method. When P-NIPAM-co-AA gates are hydrophilic at high pH value, this microcapsule permits glucose penetration into the core space and GOD reaction proceeds. However, when P-NIPAM-co-AA gates are hydrophobic at low pH value, this microcapsule forbids glucose penetration and GOD reaction will not occur. The accuracy of this concept was examined.

• 한국산학기술학회논문지
• /
• 제19권8호
• /
• pp.105-114
• /
• 2018

전기응집 (Electro-coagulation)을 활용한 분리 막 생물반응기 (Membrane Bio-Reactor) 공정의 막 오염 저감 현상을 확인하고 이를 해석하고자 하였다. 전기응집의 주요 운전 인자인 전류밀도와 접촉시간 변화가 활성슬러지 혼합액의 막 여과에 미치는 영향을 관찰하고 전기응집 과정에서 발생하는 수산화금속염이 막 오염에 미치는 역할에 대해 연구하였다. 전류밀도를 $10A/m^2$으로 높게 유지한 경우에는 전기응집 시간이 증가하여도 막 오염 감소 효과가 크지 않은 반면 $2.5A/m^2$의 낮은 전류밀도 하에서는 전기응집 시간이 증가하면 추가적인 막 오염 감소가 관찰되었다. 즉, 막 오염을 감소시키는 전류밀도와 접촉시간의 곱이 전체 막 오염 저감 정도를 지배하고 있음을 확인하였다. 또한 주어진 전류밀도와 인가시간에서 입도분포는 크게 변화하지 않은 것으로 나타나 콜로이드 입자와 막 오염 저감과는 큰 관련성이 없는 것으로 판단되었다. 그러나 전기응집을 통해 생성된 수산화알루미늄 (인산알루미늄)이 막 여과 과정에서 동적 막 (Dynamic Membrane)을 형성하여 막 오염 현상을 완화하는 것으로 확인되었다. 전기응집에서 발생한 수산화금속염이 막 표면에 동적 막을 형성하고 이로 인해 유입수의 입자성분이 직접 막 표면과 내부에 침적되는 것을 방해하고 동적 막에 주로 쌓이게 함으로써 막 오염이 감소된 것이다. 본 연구에서 밝힌 수산화금속염에 의한 동적 막의 역할은 전기응집을 활용한 MBR 공정의 후 막 오염 감소 메커니즘을 해석하는데 중요한 역할을 한다고 결론지을 수 있다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 추계 총회 및 학술발표회
• /
• pp.164-164
• /
• 2004

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.3-6
• /
• 2004

Industrial gas separation by membranes began in 1980 with the introduction of hollow-fiber polysulfone membrane systems by Permea, at that time a division of Monsanto. This first application was the recovery of hydrogen from ammonia reactor purge gas and was soon followed by the generation of nitrogen from air. Today, membrane gas separation ranks second behind cryogenic distillation in terms of nitrogen production, and this application has drawn the industrial gas companies into the membrane field.(omitted)

• 상하수도학회지
• /
• 제20권2호
• /
• pp.257-264
• /
• 2006

In this study, the treatment of domestic wastewater in a field-scale membrane submerged intermittently aerated activated sludge process($210m^3/day$) was investigated under difference aeration methods. Operating temperature was 5.4 to 25.0 and membrane used in this study is a polyethylene hollow fiber membrane(pore size $0.4{\mu}m$). The range of operating flux was $9.7{\sim}24.4l/m^2-h$ and membrane permeates periodically operated for 7min followed idle for 3 min. The results showed that MIA(modified intermittent aeration) was more efficient in nitrogen and phosphorus removal. The removal efficiencies of T-N and T-P were 73.0% and 69.6% for CIA(conventional intermittent aeration) and 57.5%, 58.6% for MIA (modified intermittent aeration). With application of modified intermittent aeration, DO reached nearly Omg/l within 10 minutes after air off. Organics of influent could be entirely consumed to the denitrification and the P-release without the influence by remained DO in intermittent aeration reactor. Therefore, newly developed KSMBR(Kowaco-KMS-Ssangyoung Membrane Bio-Reactor) process with modified intermittent aeration can be one of the useful process for stable nitrogen and phosphorus removal.

• 대한환경공학회지
• /
• 제22권3호
• /
• pp.523-533
• /
• 2000

본 연구는 재래식 혐기성 공법에 비해 메탄회수율과 처리효율이 우수한 막분리형 이상 혐기성 반응시스템을 개발하여 산생성 반응조의 미생물 체류시간을 증대시키고 시스템 운전효율을 향상시키기 위해 수행하였다. Pilot plant 운전에 사용된 막은 셀룰로오스 계통으로 $0.5{\mu}m$의 막공경과 $0.8m^2$의 유효 표면적을 가졌으며 메탄발효조는 UASB와 AF로 구성되어 있다. 혐기성 침지형 반응조를 운전한 결과 COD 제거율은 70~80%, 생성가스 중 메탄함율은 90%까지 향상시킬 수 있었다. Pilot plant 운전동안 막의 케이크 저항이 중요한 막오염원으로 나타남에 따라 이를 최소화하기 위해 세가지 공경 (40, 53, $63{\mu}m$)을 가진 전처리 필터로 적용하였다. 적용된 prefilter중 $63{\mu}m$ 전처리 필터의 경우가 가장 효과적으로 케이크 저항을 줄이고 막 유속을 증가시켜 50일 이상 장기운전을 가능케 하였다. 또한 장기 운전으로 인한 막 오염물질은 산과 알카리 세척용액에 의해 연속적으로 세척함으로써 최초 막유속의 89% 까지 회복할 수 있었다.

• 멤브레인
• /
• 제17권2호
• /
• pp.112-117
• /
• 2007

The application of membrane bioreactors for the depuration of wastewater coming from the washing of mineral oil storage tanks is described. Microfiltration hollow-fibre membranes were used in the submerged configuration. Filtration tests were carried out with a biomass concentration of about 15 g/L in order to assess the critical flux of the hollow fibre membrane used. Then particular care was taken in carrying out the performance runs in the sub-critical flux region. The reactor performance was very high, with removal efficiencies ranging between 93% and 97% also when the concentration of hydrocarbon was very high. Some kinetic parameters for the COD and the hydrocarbon removal were estimated.