• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.207-210
• /
• 2004

The pore-filled anion-exchange membranes were prepared in this study with an asymmetric poly(vinylidene fluoride)(PVDF) membrane as a nascent membrane and poly(vinylbenzyl chloride)(PVBCl) as a polyelectrolyte. The solution of PVBCI having the chloromethylate aryl ring of 80 percents and 1,4-diaminobicyclo [2,2,2]octane(DABCO) was made with the solvent of tetrahydrofuran(THF) and N,N-Dimethylformamide(DMF), which is in the rotio of 8:2. A new preparation method in this study, i.e. in-situ crosslinking, enabled us to produce the pore-filled membranes without change of size, and to control the properties of final membrane with various degree of cross-linking. From the result of surface morphologies of SEM and AFM the polyelectrolyte exists in the pores of nascent membrane as a certain configuration. From the investigation of the solvent affecting much to the permeability and rejection, it was found. that the membranes using DMF and THF showed better performances than the membranes produced by THF only. The water permeability of the final membrane at low pressure(100㎪) showed a typical ultrafiltation membrane's permeability (8-10kg/㎡hr) and good values of rejection(55∼60 percent).

• 한국세라믹학회지
• /
• 제32권3호
• /
• pp.349-358
• /
• 1995

The ceramic composite membrane was synthesized by thermal oxidation after evaporation of Al on the support prepared by slip casting process. Oxidation was performed at $700^{\circ}C$ and 80$0^{\circ}C$ under dry oxygen atmosphere. It was considered as optimum oxidation condition that the membrane showed a knudsen behaviro. A further oxidation resulted in an increase of gas permeability because top layer became densified. Then, a multi-layered composite membrane was synthesized through a sol-gel method, evaporation and thermal oxidation of Al coating processes. While the membrane was thermally stable up to 80$0^{\circ}C$, gas permeability was rapidly decreased even at a slight amount of deposition of Al.

• 멤브레인
• /
• 제10권4호
• /
• pp.205-212
• /
• 2000

실리콘 고무(고무상고분자)와 폴리스틸렌(유리상고분자)을 이용하여 true-IPN을 합성하였다. 합성방법은 단계(sequential) IPN(interpenetrating polymer net- work) 제조방법이며, 이때 IPN 내의 폴리스틸렌 함량을 10-70 wt%로 변화시켜 폴리스틸렌의 함량에 따른 산소/질소의 투과특성을 조사하였다. FTIR과 NMR의 결과 단계IPN 합성법으로 실리콘고무-폴리스틸렌의 IPN분리막이 제조되었음을 확인하였으며, 열분석 결과 폴리스틸렌의 함량이 증가할수록 실리콘고무와 폴리스틸렌의 혼합도(degree of mixing)가 증가한다는 것을 알 수 있었다. 기체투과특성 조사에서는 폴리스틸렌의 함량이 증가할수록 산소투과도는 감소하는 경향이 있었으나, 50wt% 폴리스틸렌이 함유된 분리막에서 일시적인 증가를 보여주었다. 또한 선택도는 폴리스틸렌의 함량이 증가하면서 약간 증가하다, 50wt% 폴리스틸렌이 함유된 분리막에서 20.6% 향상된 최대 값을 얻을 수 있었다. 이것은 폴리스틸렌이 50wt%인 분리막에서 IPN의 상호보완적인 성질이 가장 잘 나타난 결과라고 할 수 있다.

• Biomolecules & Therapeutics
• /
• 제12권1호
• /
• pp.9-18
• /
• 2004

Opening of the mitochondrial permeability transition pore has been recognized to be involved in cell death. The present study investigated the effect of ${\beta}$-carbolines (harmaline and harmalol) and deprenyl on the dopamine-induced change in the mitochondrial membrane permeability and cell death in differentiated PC12 cells. Cell death due to 250 4{\mu}$M dopamine was inhibited by caspase inhibitors (z-IETD.fmk, z-LEHD.fmk and z-DQMD.fmk) and antioxidants (N-acetylcysteine, ascorbate, superoxide dismutase, catalase and carboxy-PTIO). ${\beta}$-Carbolines prevented the dopamine-induced cell death in PCl2 cells, while deprenyl did not inhibit cell death. ${\beta}$-Carbolines decreased the condensation and fragmentation of nuclei caused by dopamine in PC12 cells. ${\beta}$-Carbolines inhibited the decrease in mitochondrial transmembrane potential, cytochrome c release, formation of reactive oxygen species and depletion of GSH caused by dopamine in PC12 cells, whereas deprenyl did not decrease dopamine-induced mitochondrial damage. ${\beta}$-Carbolines, deprenyl and antioxidants depressed the formation of nitric oxide and melanin in dopamine-treated PC12 cells. The results suggest that cell death due to dopamine PC12 cells is mediated by caspase-8, -9 and -3. Unlike deprenyl, ${\beta}$-carbolines may attenuate the dopamineinduced cell death in PC12 cells by suppressing change in the mitochondrial membrane permeability through inhibition of the toxic action of reactive oxygen and nitrogen species.

• 멤브레인
• /
• 제29권1호
• /
• pp.1-10
• /
• 2019

Poly(ether block amide) (PEBA)는 이산화탄소 분리에 매우 적합한 상용 블록 공중합체 중 하나이다. 기체분리막의 경우 높은 투과도 뿐 아니라 강한 기계적 강도 또한 필요로 한다. PEBA공중합체의 결정성 폴리아마이드(polyamide) 블록은 기계적 강도를 제공하며 동시에 rubbery한 폴리에테르(polyether) 부분은 이산화탄소와의 친화도를 부여하여 이산화탄소 촉진 수송에 기여한다. PEBA공중합체에서 결정성 상과 rubber한 상의 조성은 기체분리막에 적합하게 조절될 수 있다. PEBA 공중합체를 기반으로 한 분리막은 좋은 투과도를 갖지만 추가적으로 분자체 효과를 이용하여 큰 기체 투과도 손실 없이 분리막의 선택도를 향상시킬 수 있다. 혼합 매질 분리막은 혼합막의 한 종류로서 고분자 매트릭스와 유기 첨가제로 이루어져 있다. 하지만 고분자 매트릭스와 유기 첨가제간의 양립성(compatibility)에 따른 문제점 또한 존재한다. 따라서 본 총설에서는 PEBA 공중합체를 기반으로 한 혼합막의 장점과 한계에 대해 다루고자 한다.

• 한국산업융합학회 논문집
• /
• 제4권1호
• /
• pp.61-69
• /
• 2001

Polycarbonate(PC) membranes for oxygen enrichment from air were prepared by the wet phase inversion method. In order to improve oxygen separation performances of the PC membrane, the effect of the added ethanol(nonsolvent) and $CuCl_2$(metal salt) concentration in the casting solution on morphology, oxygen permeability ami $O_2/N_2$ separation factor of the membrane was studied. In addition, tensile strength and elongation at break of the membrane were investigated. An asymmetric membrane with a dense top layer and a porous sublayer was obtained. The thickness of the dense top layer decreased with increasing amount of nonsolvent additive. Compared with pure PC membrane without additive(metal salt), the oxygen permeability and $O_2/N_2$ separation factor of the $PC/CuCl_2$ membrane are significantly improved. The oxygen permeability and $O_2/N_2$ separation factor is $5.25{\times}10^{-9}cm^3(STP){\cdot}cm/cm^2{\cdot}sec{\cdot}cmHg$ and 4.5, respectively. This improvement might be due to good interaction between metal salt and oxygen.

• 멤브레인
• /
• 제6권3호
• /
• pp.182-187
• /
• 1996

우수한 분획특성을 가지는 친수성 고분자인 poly(acrylonitrile) [PAN]을 막소재로 하여 상전환법(phase inversion method)으로 복합막의 지지층으로 사용될 지지막을 제조하였으며, 한외여과 실험을 통하여 지지막의 특성인 순수 투과도와 분획분자량을 측정하였다. 이 지지막 표면에 poly(acrylic acid) [PAA]를 dip-coating 시켜 열처리한 복합막을 제막하고 에탄올 수용액의 투과증발 분리특성을 고찰하였다. PAN 지지막의 UF 특성은 순수의 투과유속이 $0.17~31\textrm{mm}^3/m^{2} \cdot s \cdot Pa$, 분획분자량이 42,000~150,000의 막을 얻었다. 복합막의 투과유속과 분리계수는 지지막의 기공구조 변화에 상당한 영향을 받고 있음을 알 수 있으며, 지지층의 분획분자량의 증가에 따라 투과유속은 감소하였고 분리계수는 공급원액의 농도에 따라 약간의 변화를 보였다.

• 한국물환경학회지
• /
• 제18권2호
• /
• pp.159-168
• /
• 2002

A lab-scale Reverse Osmosis(RO) membrane reactor was installed to investigate the membrane permeability, characteristics of membrane fouling at each conditions, and performance of elimination at different trans-membrane pressure(TMP) in the liquid fertilizer accumulated system. Experimental setup was divided to three different TMP conditions. As a result of experiment, permeability of RO membrane was proportional to the increase of TMP and temperature. After experiment was completed, two types chemical cleaning(remove the organic foulant and inorganic foulant) was done, and recover rate of permeability was each 99.8, 99.7 and 99.7%, respectively. From this experimental data, membrane fouling could be determined that the most of it was recoverable in this system, and major reason of fouling was concentration polarization. Elimination rate of solute substance in the liquid fertilizer indicated very stable(above 99%), except ammonia nitrogen, and the most stable elimination rate was investigated at the highest TMP condition (Run 3).

• 한국기계기술학회지
• /
• 제20권6호
• /
• pp.858-864
• /
• 2018

Graphene oxide (GO) laminate is a new promising material for water purification system, which has extraordinary permeability only for water molecule. It consists of numerous nano-channels, in which water molecules could be nano-confined, resulting in slip of the molecules for very fast transportation speed. In this study, water penetration rate via different thickness of GO membrane according to driven pressures are measured experimentally, so that speed of water molecules and permeability are evaluated. Generally, water penetration rate via a membrane with macroscopic-sized channel increases linearly with pressure difference between up and bottom side of the membrane, but that via GO membrane approaches asymptotic value (i.e. saturation) as like a log function. Moreover, the permeability of GO membrane was observed in inverse proportion to its thickness. Based on the experimental observations, a correlation for volume flux via GO membrane was suggested with respect to its thickness and external pressure difference.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.33-38
• /
• 2004

Molecular modeling of gas permeation through zeolite membranes with/without intercrystalline region was carried out. Molecular dynamics (MD) and Monte Carlo (MC) simulations were performed to estimate the diffusion coefficient and adsorption parameters respectively, and our proposed combined method of molecular simulation techniques with a permeation theory (CMP) was used to estimate gas permeability. The calculated permeability of gases (Ar, He, Ne, $N_2$, $0_2$, $CH_4$) at 301 K for the single crystal membrane model was about one order of magnitude larger than the experiential values, although the dependence on the molecular weight of the permeating species agreed with experiments. On the other hand, the estimated permeability using the diffusivity and adsorption parameters of the intercrystalline region model was in good agreement with the experiments. The consistency between experiments and the estimated values means the importance of considering the intercrystalline region and the validity of CMP method to predict the performance of zeolite membranes.