• 제목/요약/키워드: Membrane Force

검색결과 277건 처리시간 0.026초

공기압식 외력부가방법을 이용한 구조강도 시험기법 연구 (The Study on Structural Strength Test Technique by Using Compressed Air Type Loading Method)

  • 김종환;이기범;김호연
    • 한국항공우주학회지
    • /
    • 제38권4호
    • /
    • pp.376-381
    • /
    • 2010
  • 일반적으로 기체 구조물 개발시 운용조건에서의 구조설계 해석 검증 및 구조강도확인을 위해서 구조강도시험이 수행된다. 본 논문에서는 구조시험 하중부가방법 중 응력집중에 의해 파손되기 쉬운 재료를 기체 지지구조로 사용하고자 할 때 구조물 표면에 공기압을 이용하여 국부적 응력집중을 피하면서 분포하중을 부가할 수 있는 새로운 외력부가장치의 개발에 대하여 기술하였다. 본 장치는 부드러운 재질의 하중전달용 매개체를 이용하여 구조물 표면에 손상을 주지 않고 외력을 전달할 수 있으며, 임의형상 구조물에 대하여 쉽게 응용이 가능하다. 본 장치를 이용하여 평판구조물과 곡면구조물에 대하여 외력부가구조강도시험을 성공적으로 수행함으로써 적용시험기법의 타당성을 입증하였다.

보강토옹벽의 배부름에 관한 실험적 연구 (Bulging of Reinforced Retaining Walls)

  • 주재우;박종범;나현호
    • 한국지반신소재학회논문집
    • /
    • 제10권2호
    • /
    • pp.45-53
    • /
    • 2011
  • 최근 보강토 옹벽은 점차 콘크리트옹벽을 대체하는 안정화된 공법으로 자리 잡아가고 있다. 그러나, 보강재로서 신장성보강재(Extensible reinforcement)를 사용할 경우 보강토 옹벽의 전면벽에서 배부름(Bulging) 현상이 발생할 수 있다. 보강토옹벽의 배부름(Bulging)은 임의의 블록 높이에서 그 블록의 상단 및 하단 블록이 설계상의 상대적인 위치를 확보하지 못하는 현상이다. 이는 보강재가 인장력을 발휘하기 위해서는 어느 정도 변형이 필요하기 때문에 이에 대한 설계상의 검토가 필요하다. 따라서 본 연구에서는 알루미늄 봉을 이용하는 소형모형실험을 통해서 보강재의 신장특성이 보강토 옹벽거동에 어떤 영향을 미치는지 연구하였다. 보강재는 비신장성 보강재로서 창호지와 신장성 보강재로서 멤브레인을 이용하였다. 실험결과로부터 보강재의 강성은 보강토옹벽의 변위형태에 많은 영향을 미치는 인자임을 알 수 있었으며, 전반적으로 보강재의 강성이 증가함에 따라 최대수평변위의 발생지점이 벽체 상부로 이동하는 경향을 보이고 있다.

벌지 실험과 나노 압입 실험을 통한 박막의 기계적 물성 측정 (Measurement of Mechanical Properties of Thin Films Using a Combination of the Bulge Test and Nanoindentation)

  • 정봉부;이헌기;박현철
    • 대한기계학회논문집B
    • /
    • 제36권2호
    • /
    • pp.117-123
    • /
    • 2012
  • 본 연구에서는 벌지 실험과 나노 압입 실험을 통해 박막의 기계적 물성을 측정하였다. 벌지 실험은 외적 지지구조를 가지지 않는 박막 시편의 한 면에 일정한 압력을 가하여 박막의 변위를 측정, 압력과 변위의 관계를 이용하여 박막의 기계적 물성을 측정하는 실험이다. 나노 압입 실험은 시편에 압입 방향으로의 하중과 시편의 표면으로부터 압입자의 깊이에 대한 데이터를 통하여 시편의 기계적 물성을 측정하는 실험으로 modified King's model 을 이용하여 모재의 영향이 고려된 박막의 물성을 구할 수 있다. 두 실험은 탄성 계수와 푸아송비의 수학적 관계가 다르기 때문에 벌지 실험과 나노 압입 실험결과로부터 박막의 탄성계수와 푸아송비를 동시에 측정할 수 있다.

싱글쉘 터널 라이닝의 파괴 메카니즘 및 지보성능에 관한 연구 (A Study on failure mechanism and load-bearing capacity of single-shell tunnel lining)

  • 신휴성;김동규;장수호;배규진
    • 한국터널지하공간학회 논문집
    • /
    • 제8권3호
    • /
    • pp.273-287
    • /
    • 2006
  • 본 연구에서는 숏크리트 라이닝과 2차 콘크리트 라이닝 사이에 방수막으로 분리된 기존 이중구조의 터널 라이닝과 터널 라이닝 단면상에 전단력 전달을 저해하는 장치를 포함하지 않은 일체화 싱글쉘 구조의 터널 라이닝의 파괴양상 및 하중 지지성능에 관해 고찰한다. 하중지지력 평가를 위하여 우선적으로 수치해석적인 사전 평가가 실시되었으며, 새롭게 고안된 실대형 터널 라이닝 하중재하 실험이 실시되었다. 이때, 이완하중이나 암괴하중을 모사하기 위해 터널 천단부 집중하중이 고려되었다. 본 연구를 통하여, 동일한 터널라이닝 강도 관리기준에서 이중구조 라이닝보다 싱글쉘 라이닝 구조가 약 20%정도 높은 지지력을 보였으며, 다중 숏크리트 타설 단계마다 고성능 첨가재료 투입량의 조절로 복합재료 싱글쉘 라이닝 구조를 형성함으로써 보다 적은 고성능화 첨가재료 투입량으로 유사한 지지성능을 확보할 수 있는 가능성을 보였다.

Histological comparison of different compressive forces on particulate grafts during alveolar ridge preservation: a prospective proof-of-concept study

  • Lee, Sung-Jo;Kang, Dae-Young;Cho, In-Woo;Shin, Hyun-Seung;Shin, Seung-Il;Fischer, Kai R.;Park, Jung-Chul
    • Journal of Periodontal and Implant Science
    • /
    • 제50권3호
    • /
    • pp.197-206
    • /
    • 2020
  • Purpose: The aim of this study was to determine the impact of different compressive forces on deproteinized bovine bone mineral (DBBM) particles covered by native bilayer collagen membrane (NBCM) during alveolar ridge preservation (ARP) in the molar area, and to identify any histomorphometric and clinical differences according to the compressive force applied. Methods: Sockets were filled with DBBM after tooth extraction, and different compressive forces (30 N and 5 N, respectively) were applied to the graft material in the test (30 N) and control (5 N) groups. The DBBM in both groups was covered with NBCM in a double-layered fashion. A crossed horizontal mattress suture (hidden X) was then made. A core biopsy was performed using a trephine bur without flap elevation at the implant placement site for histomorphometric evaluations after 4 months. The change of the marginal bone level was measured using radiography. Results: Twelve patients completed the study. The histomorphometric analysis demonstrated that the mean ratios of the areas of new bone, residual graft material, and soft tissue and the implant stability quotient did not differ significantly between the groups (P>0.05). However, the mean size of the residual graft material showed a significant intergroup difference (P<0.05). Conclusions: The application of 2 compressive forces (5 N, 30 N) on particulate DBBM grafts during open-healing ARP in the posterior area led to comparable new bone formation, implant feasibility and peri-implant bone level.

Controlled Synthesis of Hexagonal Boron Nitride on Cu Foil Using Chemical Vapor Deposition

  • Han, Jaehyun;Lee, Jun-Young;Kwon, Heemin;Yeo, Jong-Souk
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
    • /
    • pp.630-630
    • /
    • 2013
  • Recently, atomically smooth hexagonal boron nitride(h-BN) known as a white graphene has drawn great attention since the discovery of graphene. h-BN is a III-V compound and has a honeycomb structure very similar to graphene with smaller lattice mismatch. Because of strong covalent sp2bonds like graphene, h-BN provides a high thermal conductivity and mechanical strength as well as chemical stability of h-BN superior to graphene. While graphene has a high electrical conductivity, h-BN has a highly dielectric property as an insulator with optical band gap up to 6eV. Similar to the graphene, h-BN can be applied to a variety of field, such as gate dielectric layers/substrate, ultraviolet emitter, transparent membrane, and protective coatings. However, up until recently, obtaining and controlling good quality monolayer h-BN layers have been too difficult and challenging. In this work, we investigate the controlled synthesis of h-BN layers according to the growth condition, time, temperature, and gas partial pressure. h-BN is obtained by using chemical vapor deposition on Cu foil with ammonia borane (BH3NH3) as a source for h-BN. Scanning Transmission Electron Microscopy (STEM, JEOL-JEM-ARM200F) is used for imaging and structural analysis of h-BN layer. Sample's surface morphology is characterized by Field emission scanning electron microscopy (SEM, JEOL JSM-7100F). h-BN is analyzed by Raman spectroscopy (HORIBA, ARAMIS) and its topographic variations by Atomic force microscopy (AFM, Park Systems XE-100).

  • PDF

Association between Prostaglandin-endoperoxide Synthase 2 (PTGS2) Polymorphisms and Blood Pressure in Korean Population

  • Jin, Hyun-Seok;Hong, Kyung-Won;Lim, Ji-Eun;Han, Hye-Ree;Lee, Jong-Young;Park, Hun-Kuk;Oh, Berm-Seok
    • Genomics & Informatics
    • /
    • 제6권3호
    • /
    • pp.110-116
    • /
    • 2008
  • Blood pressure refers to the force exerted by circulating blood on the walls of blood vessels, and chronical elevation of blood pressure is known as hypertension. Although hypertension is affected by genetic and environmental factors, the genetic background of hypertension is not fully understood. One of the candidate genetic factors, Prostaglandin-endoperoxide synthase 2 (PTGS2), is a membrane-bound enzyme, catalyzing the conversion of arachidonic acid to prostaglandin, and recently SNPs of PTGS2 gene was associated with hypertension in Japanese population. Therefore the association of PTGS2 polymorphisms was investigated with blood pressure in healthy Korean subjects, 470 unrelated individuals randomly selected from Ansung and Ansan cohorts. The 25 SNPs of PTGS2 gene were identified by the sequencing analysis of 24 Korean samples. Among identified polymorphisms, three SNPs (rs689466, -1329A>G; rs5275, +6365T>C; rs4648308, +8806G> A) were selected for further association analysis, and rs689466 located in promoter region was associated with blood pressure as well as triglyceride level in the blood. By in silico analysis, rs689466 locates in v-Myb transcription factor binding site, and the v-Myb site disappears when the SNP is changed from A to G nucleotide. Individuals with A/G and G/G genotype in rs689466 have higher blood pressure than those with A/A genotype, and the regression p-value is 0.008 for systolic and 0.004 for diastolic blood pressure. In summary, the PTGS2 polymorphism (rs689466) is associated with blood pressure in Asian populations based on this and Japanese studies, shedding light on it as a genetic risk marker of hypertension.

전산 해석을 이용한 다중연돌의 유체유발진동 (Evaluation of Wind-Induced Vibration for Multiple Stacks Using Numerical Analysis)

  • 양광혁;박재관;김현준;백송열;박순태
    • 플랜트 저널
    • /
    • 제12권3호
    • /
    • pp.24-31
    • /
    • 2016
  • 풍진동(Wind-induced vibration)은 바람에 의해 구조물에 진동이 발생하는 현상으로써 세장비가 큰 열기기 Stack 설계시 고려해야 할 중요한 사항이다. 따라서, 국제 규격에는 풍진동에 대한 설계 인자와 각 범위에 대해 필요한 고려 사항을 정의하고 있다. 규격에 의한 설계 검증은 몇몇 인자를 이용하여 간단하게 확인이 가능하다는 장점이 있는 반면, 실제 풍진동에 의한 영향을 정량적으로 평가하지 않기 때문에 실제 필요한 것보다 과도한 설계를 요구할 수 있다는 단점이 있다. 또한 여러 제약조건으로 Code 상의 요구조건을 만족하지 못하는 경우 실제 시스템의 거동을 예측할 수 없다는 단점이 있다. 이러한 점을 보완하기 위해 CFD 와 FEM 등의 수치적 해석 방법을 통해 풍진동이 실제 Stack에 미치는 영향을 해석하여 설계 적정성을 검증하여 Code 상의 요구 조건과 비교하였다.

  • PDF

고효율 전자기형 정원창 구동 트랜스듀서의 설계 (Design of electromagnetic type transducer to drive round window with high efficiency)

  • 이장우;김동욱;김명남;조진호
    • 센서학회지
    • /
    • 제19권6호
    • /
    • pp.449-455
    • /
    • 2010
  • Implantable middle ear hearing devices(IMEHDs) have being actively studied to overcome the problems of conventional hearing aids. Vibration transducer, an output devices of IMEHDs, is attached on the ossicular chain and transmits mechanical vibration to cochlea. This approach allows us to hear more clear sound because mechanical vibration is effective to transfer high frequency acoustics, but occurs some problems such as fatigue accumulation to ossicular chian and reduction of vibration displacement caused by mass loading effect. Recently, many studies for the round window stimulation are announced, because it does not cause such problems. It have been studied by older transducers designed for attaching on ossicular chain. In this paper, we proposed a new electromagnetic transducer which consists of two magnets, three coils and a vibration membrane. The magnet assembly, magnet coupled in opposite direction, were placed in the center of three coils, and the optimum length of each coil generating maximum vibrational force was calculated by finite element analysis(FEA). The transducer was implemented as the calculated length of each coil, and measured vibration displacement. From the results, it is verified the vibration displacement can be improved by optimizing the length of coils.

칼슘 및 칼륨이온이 흰쥐 자궁근(子宮筋) 활동전압(活動電壓)에 미치는 영향(影響) (Effects of $Ca^{2+}$ and $K^+$ on the Spike Action Potentials in Oxytocin-induced Uterine Contractions)

  • 김철수;김기환
    • The Korean Journal of Physiology
    • /
    • 제20권1호
    • /
    • pp.43-52
    • /
    • 1986
  • The influences of extracellular $Ca^{2+}\;and\;K^+$ upon the spike action potentials were studied in isolated uterine strips of rat. Regular, rhythmic uterine contractions were induced by the administration of oxytocin$(0.2{\sim}0.5\;I.U.)$, and recorded with force transducer. Spike action potentials were extracellularly measured by use of suction electrode, and compared with those recorded intracellularly by glass microelectrode. The results obtained were as follows : 1) The frequency and duration of spike bursts, and the number of spikes in a burst could be analyzed by use of both methods. But the absolute values of membrane potential were not measurable with the suction electrode. 2) The duration of contraction$(CD_{90};\;the\;duration\;of\;90%\;relaxation)$ was lengthened from the control 17.0 sec to 20.6 sec, in parallel with the increase of spike number from the control 21 to 26, as the increase in $Ca^{2+}$ concentration from 2 to 4 mM. 3) The amplitude and frequency of contractions were gradually decreased, simultaneously with the decrease in the number of spikes in a burst, when the $Ca^{2+}-antagonist$, verapamil was administered cumulatively. 4) The number of spikes was changed from the control 15 to 7, in cabs of the administration of ver)'low dose of verapamil$(10^{-6}\;g/l)$. 5) Increase in the numbers of spike bursts was well matched to the increase in frequency of contractions when extracellular $K^+$ was increased.

  • PDF