• Title/Summary/Keyword: Member utilization

Search Result 103, Processing Time 0.023 seconds

Time-Dependent Deformation and Durability of High-Strength Concrete over 60MPa for PSC Bridges (PSC 교량용 설계강도 60MPa 이상 고강도 콘크리트의 실용화를 위한 시간의존적 변형 및 내구성에 관한 연구)

  • Yang, Jun-Mo;Lee, Joo-Ha;Cheong, Hai-Moon;Ahn, Tae-Song;Yoon, Young-Soo
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2006.05b
    • /
    • pp.5-8
    • /
    • 2006
  • In this study, various fundamental experiments including durability and time-dependent deformation are performed to compile a database for a utilization of high-strength concrete for PSC bridges. In the mix design, concrete strength at early age when prestressing forces are introduced to the PSC member and slumpflow suitable for pumping of concrete are considered to make a concrete fit for PSC bridges. The main parameters investigated are the kinds and replacement ratios of mineral admixtures and low-heat cement. Experimental tests on durability include penetration of chloride ions, freezing-thawing, combined deterioration, and simple adiabatic temperature rise test. In addition, time-dependent deformation such as creep, drying and autogenous shrinkage, which is particularly important factor in the design and construction of PSC bridges, is tested and analyzed.

  • PDF

Strength and Microstructure of Reactive Powder Concrete Using Ternary Pozzolanic Materials

  • So, Hyoung-Seok;Janchivdorj, Khulgadai;Yi, Je-Bang;Jang, Hong-Seok;So, Seung-Young
    • Journal of the Korea Institute of Building Construction
    • /
    • v.13 no.1
    • /
    • pp.48-57
    • /
    • 2013
  • To consider the practicality and economic feasibility of developing reactive powder concrete (RPC), the strength and microstructure properties of RPC using ternary pozzolanic materials (silica fume, blast furnace slag, fly ash) were investigated in this study. Through the investigation, it was found that the compressive strength of RPC using ternary pozzolanic materials was increased significantly compared to that of the original RPC containing silica fume only. A considerable improvement in the flexural strength of RPC using ternary pozzolanic materials was found, and then the utilization of a structural member subjected to bending was expected. The X-ray diffractometer (XRD) analysis and Scanning Electronic Microscope (SEM) revealed that the microstructure of RPC was denser using the ternary pozzolanic materials than the original RPC.

A Study on the Relationships between Organizational and Technological Maturity of Korean Enterprise Networks (국내 기업 통신망의 환경 및 기술 성숙도 상관관계 연구)

  • Hong, Ki-Hyang;Juhn, Sung-Hyun;Choi, Heung-Sik
    • Asia pacific journal of information systems
    • /
    • v.10 no.2
    • /
    • pp.97-123
    • /
    • 2000
  • This paper proposes a model for assessing enterprise network maturity. We define maturity in terms of the institutional and member support for the network(organizational maturity) and its technical sophistication(technological maturity), and examine their relationships. We build several hypotheses about the relationships between the maturity types and between the maturity of the network and various organizational factors including industry, size, and performance of the enterprise. We test the hypotheses using data collected from a questionnaire survey with Korean firms. The results show that there is a positive correlation between organizational and technological maturity. It is also found that investment in the network infrastructure has a positive influence on the organizational efficiency. However, it is found that industry type does not affect network utilization, but size does, suggesting that large firms utilize network infrastructure more than small ones do. We also identify various relationships among performance, satisfaction level and the maturity of the enterprise networks. Finally, we provide an overview on the current technological state of the Korean enterprise networks.

  • PDF

An Evaluation of Mechanical Properties of Ultra High Strength Concrete(UHSC) (초고강도 콘크리트의 재료역학적 특성 평가)

  • Lim Hee Jae;Shin Sung Woo;Ahn Jong Mun;Lee Kwang Soo
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2004.11a
    • /
    • pp.281-284
    • /
    • 2004
  • The most important reason of using of ultra high strength concrete in super tall building is that ultra high strength concrete can reduce the section of members and control side sway effectively. However, the practical utilization of ultra high strength concrete is dependent not only on the production techniques, but also the overall preparation including proper code provisions, construction technique. The purpose of this study is to evaluate of mechanical properties of UHSC, such as modulus of elasticity, stress-strain behavior, modulus of rupture and tensile splitting strength. It is similar to normal or high strength concrete but necessary to discern the difference between normal or high strength concrete and ultra high strength concrete and modify existed equations. And in this study another important factor is to discern the difference according to member size, curing method in ultra high strength concrete experimentally.

  • PDF

Recent status of RDF in domestic and foreign countries (최근 국내외 폐기물고형연료(RDF) 현황 및 전망)

  • Choi, Yeon-Seok;Roh, Seon-Ah
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2006.06a
    • /
    • pp.531-534
    • /
    • 2006
  • The first RDF production plant in Korea is going to start commercial operation at Won-Ju city in October this year, where municipal solid waste is treated and converted to RBF. Korean government is preparing the quality standard of RDF and starting a new waste policy of RDF promotion instead of general waste treatment technologies such as incineration or landfill. In Europe the EU member states have decided the united quality standard of RDF to increase the amount of new & renewable energy through the promotion of RDF utilization. New quality standard of RDF and trade market of RDF in Europe is introduced in this paper.

  • PDF

Utilization of Flight Data Analysis for EBT(Evidence Based Training) Program (EBT(Evidence Based Training) 훈련프로그램의 비행 데이터 분석 활용방안)

  • Jihun Choi;Jong Hoon Ahn;Hyeon Deok Kim
    • Journal of the Korean Society for Aviation and Aeronautics
    • /
    • v.31 no.4
    • /
    • pp.1-6
    • /
    • 2023
  • EBT has designed and implemented a training program that relies on evidence from events such as Flight Operation Quality Assurance (FOQA), accidents, and incidents specific to each airline. The goal is to enhance the overall skills of the flight crew. This involves assessing the capabilities of individual crew members and, based on the findings, providing additional training to address any shortcomings. To create a training program aligned with the objectives of EBT, this study focused on analyzing data from hard landing incidents in domestic airlines obtained through FOQA events. A practical EBT training program was then developed, specifically targeting adverse weather conditions. The program evaluates landing capabilities, and the results guide the supplementation of any deficiencies in the landing skills of each flight crew member, ultimately aiming to enhance their confidence.

The Effect of Transformational Leadership on Helping Behavior of Secretaries : Focusing on the Moderating Effect of LMX and Utilization of Mobile Devices after Work (변혁적 리더십이 비서들의 도움행동에 미치는 영향: LMX와 퇴근 후 모바일기기 업무사용의 조절효과를 중심으로)

  • Go, Hyun-Mi;Kim, Dal-Won;Park, Jae-Chun
    • The Journal of the Korea Contents Association
    • /
    • v.18 no.9
    • /
    • pp.178-198
    • /
    • 2018
  • This study examines the effects of transformational leadership on helping behavior for the secretary workers. We also demonstrate comprehensively the moderating effects of job resources(LMX) and job demands(utilization of mobile devices after work) on the relationship between transformational leadership and helping behavior. The results of this study targeted 140 incumbent secretaries are as follows: First, transformational leadership has a significant positive effect on the helping behaviors of members. Second, the interaction effect of LMX(synergistic effect) was verified in the positive relationship between transformational leadership and helping behavior. Finally, interaction effects of utilization of mobile devices after work(buffering effect) were confirmed in the relationship between transformational leadership and helping behavior. The results of this study are that transformational leadership of middle managers is important to strengthen worker's helping behavior, but it is also important to understand the contextual factors such as social support(LMX) and work environment(utilization of mobile devices after work) that affect the will and autonomy of members in accepting leadership. Finally, we suggest the theoretical and practical implications of this study, present limitations and future research directions.

Study on Utilization of Black Box Theater in Metaverse Performances - Focusing on Case of Research and Development of Prototype of Metaverse Musical <RE:MEMBER> (메타버스 공연에서의 블랙박스 극장 활용 방안 연구- 메타버스 뮤지컬 <RE:MEMBER> 프로토타입 연구개발사례를 중심으로)

  • Chan-Yong Lee;Du-Boem Kim;Ji-Hyi Ju
    • The Journal of the Convergence on Culture Technology
    • /
    • v.10 no.6
    • /
    • pp.403-409
    • /
    • 2024
  • This study aims to explore the future direction of metaverse performances by examining interactions between performers and audiences within a virtual theater, focusing on a prototype R&D case that implemented a black box (flexible) theater in the metaverse. As COVID-19 has become somewhat endemic, metaverse performances are now in a position where they must prove their identity and future potential for growth. While expanding the offline-centric performing arts industry into the online space during the pandemic was meaningful in itself, the time has come for metaverse performances to secure their viability as an independent industry. Unlike the fixed seating arrangement of a proscenium theater, a black box theater has the unique characteristic of being able to adapt in various ways. Given the current situation, this study, which applies the concept of a black box theater, is expected to play a significant role in the development of the metaverse performance industry, particularly in enhancing interactions with audiences.

P2P-based Group Communication Management Using Smart Mobile Device (스마트 이동 단말을 이용한 P2P 기반 그룹 통신 관리)

  • Chun, Seung-Man;Park, Jong-Tae
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.49 no.9
    • /
    • pp.18-26
    • /
    • 2012
  • As the performance of the next-generation broadband wireless networks is dramatically enhanced, various services (i.e., education, video conferencing, online games, etc.) have been provided to users through a smart mobile platform. Since those services are usually provided by using the centralized architecture, it is difficult for a lot of users to provide the scalable communication service with regard to traffic management. To solve these problems, we have proposed an architecture of P2P-based group communication management scheme using smart mobile device. More specifically, we design the group management protocol and algorithm for the group member management and the traffic management. By using these methods, the mobile multimedia streaming service can be provided with scalability. In order to verify the performance of the proposed scheme, we have mathematically analyzed the performance in terms of the average transmission delay and bandwidth utilization.

Development of a 3D Model-Based Demonstration DB System for Efficient Management and Utilization of Inspection and Diagnosis Data of Small and Medium-Sized Bridges (중소규모 교량의 점검·진단 데이터 효율적 관리 및 활용을 위한 3D 모델 기반 실증 DB시스템 개발)

  • Park, Se-Hyun;Jung, Dae-Sung;Seo, Jin-Sook;Kim, Tae-Hyeong
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.25 no.6
    • /
    • pp.1-11
    • /
    • 2021
  • As the aging of large domestic SOC facilities accelerates, facility maintenance is also changing from safety evaluation based on the current condition to performance-oriented preventive and preemptive maintenance based on the prediction of the level of future obsolescence. In particular, in the case of bridges, class 1 and 2 bridges are systematically managed along with many studies, but for small and medium-sized class 3 bridges there is no collection and utilization of historical data presenting performance degradation during their service life. Therefore, in this study, 3D model-based demonstration DB system was designed and developed to intuitively check the damage change rate at the damage location by registering the maintenance history by life cycle for each member's exterior damage in the 3D bridge object and to enable API-based comprehensive performance evaluation.