• 수산해양기술연구
• /
• 제28권1호
• /
• pp.71-78
• /
• 1992

Zr-4 used for a cladding and an end plug of reactor component has creep deformation under operation at high temperature. Creep is regarded as the time dependent deformation of a material under constant applied stress. Although the major source of the deformation of zirconium component in water-cooled reactors is irradiation creep, the thermal creep may give a rise to significant deformation in reactor component especially at relatively high temperatures and at various constant stresses, and therefore it must be predicted accurately. Stress relaxation is the time dependent change of stress at constant strain and it is a process related intimately to creep. In this paper, the creep behavior and stress relaxation of Zr-4 is examined at the temperature of 50$0^{\circ}C$ that is 40% of the absolute melting temperature of Zr-4 under the stress below yield stress and under the various constant strains. The results obtained are summarized as follows: 1) With an increase of stress, the steady state creep rate increases and the creep rupture time decreases. 2) The steady state creep rate $\varepsilon$(%/s) for the stress $\sigma$sub(c) (kgf/mm super(2)) of Zr-4 increases outstandingly. All the empirical equations computed for Zr-4 increases outstandingly. All the empirical equations computed for Zr-4 are in accord with Norton's model equation($\varepsilon$=K$\sigma$ sub(c) super (n)). The constants of materials computed are as follows: K=3.9881$\times$10 super(-5), n=1.9608 3) The rupture time T sub(r) (hr) decreases linearly with the increase of stress on the log-log scaled graph. The empirical equations computed for Zr-4 are in accord with Bailey's model equation (T sub(r)=K sub(1)$\sigma$sub(c) super(m)). The constants of materials computed are as follows: K sub(1)=1.2875$\times$10 super(16), m=-3.467 4) It seems clear that the strain could be quantitatively dependent on the high temperature creep properties such as creep stress, rupture time, steady state creep rate and total creep rate. It is found that these relationships are linear on the log-log graph. 5) In stress relaxation test, as the critical constant strain that can be allowed to the specimen is larger, stress relaxation becomes more rapid, and as the constant strain is smaller, the stress relaxation becomes slower.

• Composites Research
• /
• 제30권6호
• /
• pp.365-370
• /
• 2017

탄소섬유 강화 열가소성 수지 복합재료(Carbon fiber reinforced thermoplastic composites; CFRTPs)의 물성은 다양한 요인들에 영향을 받는다. 그 중에서도 탄소섬유 표면에 Sizing되어 있는 에폭시(Epoxy) 층은 열가소성 수지와 상호 작용(Interaction)이 없어 매우 취약한 계면을 형성하며, 열가소성 수지의 높은 용융 점도(Melting viscosity)는 탄소섬유 다발(Bundle) 사이로 함침(Impregnation)이 어려워 탄소섬유 강화 복합재료 내부에 기공(Void)를 형성한다. 이와 같이 탄소섬유와 열가소성 수지 간의 낮은 계면전단강도(Interfacial shear strength)은 탄소섬유강화 열가소성 복합재료(Carbon fiber reinforced thermoplastic composites; CFRTPs)의 기계적 물성을 저하시키는 가장 중요한 요인 중 하나이다. 따라서, 본 연구에서는 열가소성 수지와의 상호작용이 없는 탄소섬유 표면의 에폭시 층을 열풍을 통해 제거하고, 열가소성 수지의 점도를 낮춰 함침도를 향상시키기 위해서 용액형 열가소성 수지를 제조하여 탄소섬유 표면에 Sizing 처리 함으로써 CFRTPs의 물성을 향상시켰다. CFRTPs의 층간전단강도(Interlaminar shear strength; ILSS) 및 굽힘 강도(Flexural strength)를 통해 이를 검증하였으며, 수지의 함침도는 기공률(Void content)의 계산을 통해 분석하였다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1999년도 춘계학술대회 및 발표대회 강연 및 발표논문 초록집
• /
• pp.5-5
• /
• 1999

The Principal deficiency of the existing notion about the sintering-mixtures consists in the fact that almost no attention is focused on the Phenomenon of alloy formation during sintering, its connection with dimensional changes of powder bodies, and no correct ideas on the driving force for the sintering process in the stage of establishing chemical equilibrium in a system are available as well. Another disadvantage of the classical sintering theory is an erroneous conception on the dissolution mechanism of solid in liquid. The two-particle model widely used in the literature to describe the sintering phenomenon in solid state disregards the nature of the neighbouring surrounding particles, the presence of pores between them, and the rise of so called arch effect. In this presentation, new basic scientific principles of the driving forces for the sintering process of a two-component powder body, of a diffusion mechanism of the interaction between solid and liquid phases, of stresses and deformation arising in the diffusion zone have been developed. The major driving force for sintering the mixture from components capable of forming solid solutions and intermetallic compounds is attributed to the alloy formation rather than the reduction of the free surface area until the chemical equilibrium is achieved in a system. The lecture considers a multiparticle model of the mixed powder-body and the nature of its volume changes during solid-state and liquid-phase sintering. It explains the discovered S-and V-type concentration dependencies of the change in the compact volume during solid-state sintering. It is supposed in the literature that the dissolution of solid in liquid is realised due to the removal of atoms from the surface of the solid phase into the melt and then their diffusicn transfer from the solid-liquid interface into the bulk of liquid. It has been shown in our experimental studies that the mechanism of the interaction between two components, one of them being liquid, consist in diffusion of the solvent atoms from the liquid into the solid phase until the concentration of solid solutions or an intermetallic compound in the surface layer enables them to pass into the liquid by means of melting. The lecture discusses peculimities of liquid phase formation in systems with intermediate compounds and the role of the liquid phase in bringing about the exothermic effect. At the frist stage of liquid phase sintering the diffusion of atoms from the melt into the solid causes the powder body to grow. At the second stage the diminution of particles in size as a result of their dissolution in the liquid draws their centres closer to each other and makes the compact to shrink Analytical equations were derived to describe quantitatively the porosity and volume changes of compacts as a result of alloy formation during liquid phase sinteIing. Selection criteria for an additive, its concentration and the temperature regime of sintering to control the density the structure of sintered alloys are given.

• 해양환경안전학회지
• /
• 제23권1호
• /
• pp.40-46
• /
• 2017

본 연구는 LS-DYNA 971 을 이용하여 내빙 구조 선박과 빙산 모형 간의 충돌 시험을 수행 후 북극해 운항 선박의 내빙 능력을 분석하였다. 국제선급연합회(IACS)의 Unified Requirements for Polar ship(URI) 규정을 바탕으로 FEM 선박 모형에 내빙 구조를 적용하였으며, 빙산 모형에는 Elastic-perfect plastic 물성과 Tsai-Wu 항복 곡면을 적용하였다. 또한 실험 결과 비교를 위하여 내빙 구조를 갖추지 않은 일반선박 모형과의 충돌 시험도 수행하였다. 실험 결과 일반 구조 선박의 구형 선수에 빙산 모형에 의해 움푹 들어간 약 1.8 미터 깊이의 선체 손상이 발생하였으나, 내빙 구조 선박의 충돌에서는 약 1.0 미터 깊이의 선체 손상만이 발생하였다. 또한 일반 구조 선박과 충돌한 빙산모형은 원형의 상태를 거의 유지한 반면, 내빙 구조 선박과 충돌한 빙산 모형은 내빙 구조의 구형 선수에 의해 빙산이 일부 파괴되는 현상이 발견되었다.

• 한국분말재료학회지
• /
• 제16권6호
• /
• pp.442-448
• /
• 2009

$ZrB_2$-based composites are candidate materials for ultra-high temperature materials (UHTMs). $ZrB_2$ has become an indispensable ingredient in UHTMs, due to its high melting temperature, relatively low density, and excellent resistance to thermal shock or oxidation. $ZrB_2$ powders are usually synthesized by solid state reactions such as carbothermal, borothermal, or combined carbothermal reaction. SiC is added to this system in order to enhance the oxidation resistance of $ZrB_2$. In this study, $ZrB_2$?based composites were successfully synthesized and densified through two different processing paths. $ZrB_2$ or $ZrB_2$ 25 vol.%SiC was fully synthesized from oxide starting materials with reducing agents after heat treatment at 1400$^{\circ}C$. Besides, $ZrB_2$?20 vol.%SiC was fully densified with $B_4C$ as a sintering additive after hot pressing at 1900$^{\circ}C$. The synthesis mechanism and the effect of sintering additives on densification of $ZrB_2$ ?SiC composites were also discussed.

• 동의생리병리학회지
• /
• 제16권5호
• /
• pp.914-920
• /
• 2002

This experiment is carried out for test whether the addition temperament drugs of Danchisoyo-san have an anti-inflammatory effect and have suppression effect on immunocyte in the state of inflammation which induced by carageenan and zymosan. The freezing lyophilization powder which were extracted from Danchisoyo-san divided low dose group(200mg/kg-DSL) and high dose group(500mg/kg-DSH) and after melting in water, it was orally administered to the mouse. Compared with inflammation induced group which were induced by triggering-inflammation reagent carageenan and zymosan and normal contrast group, we measured the edema decrement effect, macrophage and spleen cell activation. 1. Danchisoyo-san has suppress inflammatory reaction induced by carrageenan. 2. Danchisoyo-san has suppress increasing activation of abdominal cavity macrophage cell in the carrageenan induced inflammation. 3. Danchisoyo-san has suppress increasing activation of spleen cell in the carrageenan induced inflammation. 4. Danchisoyo-san has suppress increasing activation of abdominal cavity macrophage in the zymosan induced inflammation. 5. Danchisoyo-san has suppress increasing activation of spleen cell in the zymosan induced inflammation. Based on the above result, Danchisoyo-san was improved its suppression effect to the inflammatory reaction through the suppression of spleen cell and macrophage activation. So we concluded that Danchisoyo-san is prospected as a anti-inflammatory agent to cure inflammation.

• Conservation and Restoration of Cultural Heritage
• /
• 제1권1호
• /
• pp.9-22
• /
• 2012

The most widely excavated iron artifacts used as weapons or farm tools from central southern regions of Korea were subjects of non-metallic inclusion analysis through metallographic examination, microhardness measurement, and scanning electron microscopy with energy dispersive X-ray spectroscopy. Through metallographic interpretation and study of the analyzed results, the steel manufacturing and iron smelting using heat processing in the iron artifacts excavated from the central southern region of the ancient Korean peninsula was studied, and the analysis of the non-metallic inclusions mixed within the metallic structures was interpreted as the ternary phase diagram of the oxide to infer the type of iron ores for the iron products and the temperature of the furnace used to smelt them. Most of the ancient forged iron artifacts showed $Al_2O_3/SiO_2$ with high $SiO_2$ contents and relatively low $Al_2O_3$ contents for iron ore, indicating t hat for $Al_2O_3$ below 5%, it is presumed that magnetic iron ores were reduced to bloom iron (sponge iron) with direct-reduction process for production. The temperature for extraction of wustite for $Al_2O_3$ below 1% was found to be $1,020{\sim}1,050^{\circ}C$. Considering the oxide ternary constitutional diagram of glassy inclusions, the steel-manufacturing temperature was presumed to have been near $1,150{\sim}1,280^{\circ}C$ in most cases, and minimum melting temperature of casting iron part excavated in Daeseong-ri. Gyeonggi was near $1,400^{\circ}C$, and it is thought that hypoeutectic cast iron of about 2.3% carbon was casted and fragility of cast iron was improved by decarburizing in solid state.

• 청정기술
• /
• 제19권2호
• /
• pp.75-83
• /
• 2013

본 총설에서는 이원계 티타늄 합금 스크랩을 재활용하기 위해 수소 플라즈마 아크 용해를 이용하여 잉곳을 제조하고, 수소화-탈수소화법과 고상탈산 공정을 통해 저산소 합금 분말을 제조하는 기술에 대하여 소개하고자 한다. 이에 더해, 이원계 티타늄 합금 스크랩을 이용하여 고용상 서메트용 탄화물 분말을 제조하는 응용 분야에 대해서도 소개하고자 한다. 이원계 티타늄 합금 스크랩은 수소 플라즈마 아크 용해를 통해 건전한 잉곳의 제조가 가능함을 확인하였고, 최종적으로 제조된 티타늄 합금 분말의 산소함량은 1,000 ppm 이하였으며, 이를 고용상 서메트용 탄화물 분말의 제조에 응용이 가능함을 확인하였다.

• 마이크로전자및패키징학회지
• /
• 제17권4호
• /
• pp.41-48
• /
• 2010

본 연구에서는 일액형 이방 도전성 페이스트(anisotropic conductive paste, ACP) 혼합 조성의 상온 보관성을 향상시키기 위해 2-methyl imidazole 경화 촉매제를 5종의 각기 다른 물질로써 encapsulation하였다. Encapsulation용 분말 물질들은 DSC를 통해 그 융점을 관찰하였으며, 이를 통해 encapsulation용 분말 물질들을 액상으로 용융시켜 encapsulation하는 공정이 가능함을 확인할 수 있었다. Encapsulation된 2-methyl imidazole 분말을 포함한 ACP 혼합물질의 상온 보관성을 평가하기 위하여 시간에 따른 점도 변화가 관찰되었다. 그 결과, stearic acid와 carnauba wax로 encapsulation된 2-methyl imidazole 분말을 포함한 혼합물질에서 향상된 상온 보관성을 관찰할 수 있었으며, 이러한 formulation은 기본 혼합물질과도 유사한 경화 거동을 보임을 확인할 수 있었다. 최종적으로 stearic acid와 carnauba wax로 encapsulation된 2-methyl imidazole 분말을 포함한 혼합물질을 사용하여 RFID 칩을 제조된 안테나 패턴이 형성된 PET 기판에 고속 플립칩 본딩을 실시하였다. 이 경우 측정된 접합 강도는 기본 혼합물질에 비해 약 37%의 수준인 것으로 측정되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.52-52
• /
• 2009

To date, chalcogenide alloy such as $Ge_2Sb_2Te_5$(GST) have not only been rigorously studied for use in Phase Change Random Access Memory(PRAM) applications, but also temperature gap to make different states is not enough to apply to device between amorphous and crystalline state. In this study, we have investigated a new system of phase change media based on the In-Sb-Te(IST) ternary alloys for PRAM. IST chalcogenide thin films were prepared in trench structure (aspect ratio 5:1 of length=500nm, width=100nm) using Tri methyl Indium $(In(CH_3)_4$), $Sb(iPr)_3$ $(Sb(C_3H_7)_3)$ and $Te(iPr)_2(Te(C_3H_7)_2)$ precursors. MOCVD process is very powerful system to deposit in ultra integrated device like 100nm scaled trench structure. And IST materials for PRAM can be grown at low deposition temperature below $200^{\circ}C$ in comparison with GST materials. Although Melting temperature of 1ST materials was $\sim 630^{\circ}C$ like GST, Crystalline temperature of them was ~$290^{\circ}C$; one of GST were $130^{\circ}C$. In-Sb-Te materials will be good candidate materials for PRAM applications. And MOCVD system is powerful for applying ultra scale integration cell.