• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.25-26
• /
• 2022

In this study, glued laminated timber were manufactured by different types of adhesives for larch and spruce. Adhesives used to manufacture glued laminated timber include resorcinol resin, phenol resorcinol resin, melamine resin, and polyurethane. The char thickness and char rate according to the type of adhesive forglued laminated timber were analyzed. Melamine, resorcinol, and polyurethane showed excellent fire resistance performance in that order.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.792-797
• /
• 2015

In this study, three softwood species were treated with water-soluble melamine resin by different concentration and treatment time under vacuum pressure for improving mechanical property, abrasion resistance, and incombustibility. After the treatment, a compreg was manufactured and then evaluated on physical properties. Additionally, incombustibility of compreg was determined by comparing with a wood that was treated by spraying a water-soluble fire retardant on surface. As concentration of resin increased, bending strength and Brinell hardness increased as well as abrasion resistance, but there was no correlation on treatment and mechanical properties by treatment time. The wood impregnated by water-soluble melamine resin under vacuum pressure showed better incombustibility than that of a water-soluble fire retardant sprayed wood. Therefore, this treatment could be used for improving incombustibility of wood.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.2
• /
• pp.100-107
• /
• 1998

Diamond wheels with fine grains and multi-porous structures are newely trial developed for smoothing and mirror finishing materials. Grinding wheel must have performed both to remove tool marks efficienitly and to contact elastically with curved surfaces, that are employed for ultra precision and high performance grinding of difficult-to materials such as tungsten carbide alloy using tool and die materials, Diamond grains are bonded by a melamine resin to prevent the decrease of machining efficiency due to grain sinking within the bond materials. Also, highly foamed structures are developed to increase the flexibility of the grinding wheel, and to induce self-sharpening by increasing contact pressure between the grinding wheel and workpiece surfaces. In this paper, melamine-bonded diamond wheels try to manufacture, then the forming method of grinding wheel are suggested, and the grinding characteristics of melamine-bonded diamond grinding wheel are also illustrated.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.5
• /
• pp.391-395
• /
• 2006

Microcapsules containing fragrant oils as a core material were prepared by in situ polymerization, using melamine-formaldehyde prepolymer as the wall material. The several parameters, such as stirring times, stirring rates, emulsifier types, emulsifier concentrations, and the viscosity of the core materials, affect the characteristics of the microcapsules. These parameters were investigated by the analyses of microcapsule size, particle size distribution, and morphology. The average microcapsule size decreased with an increase in stirring time, stirring rate, emulsifier concentration, and viscosity of the core material. It was also found that poly(vinyl alcohol) as a protective colloid could enhance the stability of the melamine-formaldehyde microcapsules.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.11 no.1
• /
• pp.51-62
• /
• 1987

In this study, electrostatic behavior of polyester and nylon fabric treated with anti-static agents were investigated. The effects of the concentration of the agents and curing conditions on the electrostatic charge of the fabrics were studied. And washfastness, lightfastness and physicalproperties of the treated fabrics were also investigated. The results were as follows: 1) Polyethylene glycol alkylester was more effective in antistatic behavior than polyethylene laurylphosphate, and polyester is more effective in anti-static behavior than nylon. 2) Concentration of anti-static agents were suitable in concentration of $4\%$. 3) Glyoxal resin was more effective in anti-static behavior than melamine resin, and it was also good in the retaing anti-static behavior after treatments of lightfastness and washfastness. 4) As the condition of curing treatment, $190^{\circ}C$, 1min. for glyoxal resin and $130^{\circ}C$, 4min. for melamine resin is appropriate. 5) In comparison of anti-static behavior according to treating conditions, the simultaneous treatment was more effective than any other treatments. 6) Change of electrostatic charge of anti-static nylon cloths after treatments of lightfastness and washfastness increased greatly in above 10 laundering time and 20 fade-O-meter time. 7) In physical properties according to concentration of treating agents. decrease of physical properties scarcely appeared in concentration of treating agents $4\~5\%$.

• Journal of the Korea Furniture Society
• /
• v.21 no.2
• /
• pp.126-132
• /
• 2010

High wear resistances are obtained with an additional coating of the surface of the decor film in the same operation of impregnating with low viscosity melamine resin by liquid overlay system. The cellulosic fibers have a good adhesion to the corundum particles and keep them sufficiently homogeneous in the blend with the resin. The amount of these fibers in nearly as big as it is in a common overlay in relation to the resin. Therefore these fibers keep the resin inside during the press process and consequently very the surface of the decor print of the film. That means that the corundum particles are equally dissipated throughout the entire layer over the decor. The change of the color of the print is nearly not visible as the particles are almost equally dissipated. Looking to the flooring purposes of liquid overlay one can see that by the lesser exposure of the corundum particles on the very surface, there is no longer an abrasive surface but a feeling like a normal melamine surface.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.7
• /
• pp.1095-1103
• /
• 2008

The effects of resin finish and dyeabilities of four kinds of Iyocell fabrics that were manufactured by four kinds of pulps were investigated. The dyeabilities of Iyocell fabrics were similar, but differed from cotton fabric. In early stage of 30 minutes, cotton fabric was shown higher dye exhaustion ratio than Iyocell fabrics, however after then cotton fabric did not increase dye exhaustion, Iyocell fabrics increased continuously. At last, the dye exhaustion ratio of Iyocell fabrics were about 75% and that of cotton fabric was 65%. Two kinds of experimental procedures were applied for Iyocell fabrics. One was what the fabrics were treated with resins and washed with cellulase, and then dyed with reactive dyes. The other procedure was the fabrics were dyed with reactive dyes, and then applied the resin treatments and cellulase washing. After fibrillation and washing the undyed Iyocell fabric and the Iyocell fabric that was dyed with C.I.Reactive Red 120, their weight loss ratios were 3.5% and 2.8%, respectively. Dyeing with reactive dyes caused the crosslinking between cellulose and dyes and the crosslinking decreased fibrillation. The weight loss by enzyme washing of Iyocell fabrics decreased by the glyoxal and melamine resin treatments. The reduction of weight loss can be caused by fibrillation decrease. Dyeing and resin treating can be showed the synergic effect on the reduction of fibrillation. The effect of glyoxal resin on the reduction of fibrillation was a little better than that of melamine resin.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.37-38
• /
• 2003

Melamine resin microcapsules with mean sizes from 500 to 600 m were prepared by using a micro-tubular reactor (microreactor) with toluene and sodium dodecylsulfate (SDS) as emulsifiers. Conventional stirring method with telomeric surfactant in place of SDS produced microcapsules with mean sizes from 100 to 200 nm. Preparation by means of microreactor method with telomeric surfactant gave microcapsules with sizes below 200 nm in narrow particle size distribution. TG analysis revealed that the microcapsules contained 50 wt% of toluene.

• Fashion & Textile Research Journal
• /
• v.7 no.1
• /
• pp.81-84
• /
• 2005

Skin patch test and antibacterial properties of the reaction products between poly(hexamethyl biguanide) hydrochloride and trimethylol melamine on textile fabrics were examined. Antibacterial activities of anti-microbial agent treated samples are very good. The reduction ratios against four kinds of colonies are 99.9 % after repeated laundering ten times. Skin patch test results for anti-microbial agent treated samples are almost-negative by Hi-scope judgement and macroscopical judgement.

• Journal of the Korean Applied Science and Technology
• /
• v.18 no.1
• /
• pp.29-39
• /
• 2001

An acrylic resin was synthesized with several monomers, styrene(St), 2-hydroxyethyl methacrylate(2-HEMA), n-butyl acrylate, methyl methacrylate, and acetoacetoxyethl methacrylate(AAEM) to prepare a high-solid coatings. Then, a high-solid acryl/melamine coatings was prepared by curing the acrylic resin with a curing agent, hexamethoxymethylmelamine(HMMM). The curing behavior of the acrylic resin with HMMM was investigated by the Ozawa method using DSC. For AAEM/HMMM and 2-HEMA/HMMM curing reactions, activation energies were 33.01 and 27.12 kcal/mol and frequency factors were $9.54{\times}10^{15}}$ and 1.53{\times}10^{13} $min^{-1}$, respectively. From the results, it was found out that 2-HEMA showed higher reactivity with the curing agent than AAEM.