• Korean Journal of Remote Sensing
• /
• v.21 no.5
• /
• pp.433-443
• /
• 2005

This paper show that, without installation of expensive VR (Virtual Reality) program, the sharing information is possible through posting three-dimensional road structures on the web, and avoiding the conventional top-down decision making method, fast bottom-up communication is possible base on the Virtual GIS (Geographic Information System). In this paper, using Viewpoint Scene Builder, internet-based software, the transformation was conducted to give pertinent type for web posting. In order to use the completed route at the scene builder, the output with ASCII Export is required, and ASE (ASCII Scene Export) contains the property information including the coordinate and frame of mesh vertex. Through in advance recognition of the problems regarding route design and petition due to environmental rights infringement, the time and cost due to design alteration can be reduced. It's difficult to provide VR based on the internet because file that embodied with internet GIS was complicated and its capacity comes to scores of mega-bites. But, this study provides VR with internet according to a basis by simplification of files.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1065-1068
• /
• 2008

Concrete is still one most common construction materials even in railway structures. As structures become massive and mega-sized, the importance of early age concrete quality control becomes more significant. Among various factors, relative humidity and temperature are the primary factors governing the early age quality. Temperature raise due to cement hydration causes stress, which can develop to cracking with internal and/or external restraints. Exposure conditions including ambient temperature, humidity and wind also significantly affect the cracking behavior of early age concrete. Among many of studies on the early age concrete behavior, investigation on the variation of temperature and relative humidity internal of concrete is not common. That is in part because the difficulties in measuring the relative humidity and temperature inside the concrete. This study used a digital sensor with an appropriate logger to measure internal temperature and relative humidity. This direct measuring method is expected to provide more reliable and comprehensive data acquisition on the early age behavior of concrete.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.3
• /
• pp.81-91
• /
• 2019

Fashion exhibitions in museums are an important media to deliver ideas of fashion. Although it still arouses controversy, museums have become an ideal platform for fashion exhibitions since some fashion exhibitions have garnered successful results in mega museums. This can be considered as a cultural phenomenon and a new paradigm since fashion exhibitions in museums are closely related to new museums and fashion museology. Thus, this study examines the definition of 'fashion exhibitions in museums' based on new museums and fashion museology, and then lays the groundwork for its typology through an analysis of preceding research about fashion exhibitions from the 1970s to the present day. In consequence, fashion exhibitions in museums are categorized into five types; retrospective exhibition, survey exhibition, fashion photography and film exhibition, and consider both virtual exhibitions and fashion brand exhibitions.

• Journal of Integrative Natural Science
• /
• v.12 no.1
• /
• pp.1-8
• /
• 2019

Smart pole is one of mega trend in smart city development. It has multi-function to get as much as data from the street to better city management. And smart street lighting of smart pole as core part of smart city development is being implemented by many cities in globally. Refer to the latest edition of Navigant Research's Smart City Tracker includes smart city projects in 221 cities, a quarter of which are deploying smart street lighting ranging from initial pilots to citywide and regional deployments that span tens and even hundreds of thousands of lights. The most important feature of smart street lighting solution is "Connectivity" through the IoT technology. In order to implement the smart city, we should have so-called intelligent watchdog and mesh networked post for keeping the various smart city technology development progress and operation properly. Smart street lighting solution could be main infrastructure as an enabler for a range of smart city applications. We can talk about the expected role of smart street lighting for the smart city development on this paper.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.145-150
• /
• 2013

As a recent global trend, the majority of mega-size plant projects are delivered through EPC (Engineering, Procurement and Construction) contracts, where a single contract is awarded for engineering, procurement, and construction. Under this contracting mechanism, it is challenging for contractors to carry out the projects under traditional project management processes used in design-bid-build projects. A new EPC Plant, the POSCO Special Steel Plant in Changwon, was built successfully at the beginning of 2012 and it is currently in full-scale production. The project has encountered a number of major difficulties however, with some technical and managerial issues through its development process. As summarized in this paper, the authors (as project participants with the contractor) investigated it as a post construction analysis and recorded the Lessons-learned for future project management improvement.

• Asia Marketing Journal
• /
• v.11 no.2
• /
• pp.53-72
• /
• 2009

In the summer of 2008, the movie Dachimawa Lee: Villain, Get on the Express to Hell is waiting for its first release. This movie is based on a short film which was tremendously popular when it was first introduced on the internet in 2000, and the director Ryu Seung Wahn is expecting a mega hit of the movie this summer. Showbox is one of the leading movie distributors in Korea. After a series of blockbuster hits such as Welcome to Dongmakgol, The Host, and The Chaser, Showbox is now in stagnation. Along with sluggish economy in Korea, most of recent movies distributed by them didn't even reach the breakeven. However, expectation on the upcoming movie, Dachimawa Lee, is higher than ever. Marketing department of Showbox has to decide what kind of media channel to choose and which marketing strategy to apply. It needs to make a decision about whether to target the so-called mania group or the general public of much bigger size. In this case study, the distinctiveness of the movie marketing and its process will be discussed. Moreover, the marketing strategies for Dachimawa Lee's success will be examined in the Showbox's point of view.

• Asia pacific journal of information systems
• /
• v.31 no.3
• /
• pp.378-391
• /
• 2021

The low use of e-vehicles in Yogyakarta City and Pekanbaru City is an essential issue for local governments to maximize e-government policies in both regions. The purpose of this research is to analyze people's attitudes and factors influencing the community of e-Samsat (e-Vehicle tax) users in developing the UMEGA theory, namely technology and government trust. This is a quantitative research based on the philosophy of positivism, which is used to examine populations and individual samples. Data were collected using research instruments and quantitatively analyzed. Furthermore, the hypothesis of the obtained data was tested using SEM-PLS. The results showed that social influence does not affect attitudes of e-Samsat (e-Vehicle tax) users. Furthermore, the study showed that the development of umega theory by adding variables of trust in technology and government affects people's behavior in using e-Samsat services.

• Restorative Dentistry and Endodontics
• /
• v.31 no.2
• /
• pp.96-102
• /
• 2006

There are various factors affecting the fracture of NiTi rotary files. This study was performed to evaluate the effect of cross sectional area, pecking motion and pecking distance on the cyclic fatigue fracture of different NiTi files. Five different NiTi $files-Profile^{(R)}$ (Maillefer, Ballaigue, Switzerland), $ProTaper^{TM}$(Maillefer, Ballaigue, Switzerland), $K3^{(R)}$ (SybronEndo. Orange, CA) , Hero $642^{(R)}$ (Micro-mega, Besancon, France), Hero $Shaper^{(R)}$ (Micro-mega, Besancon, France)-were used. Each file was embedded in temporary resin, sectioned horizontally and observed with scanning electron microscope. The ratio of cross-sectional area to the circumscribed circle was calculated. Special device was fabricated to simulate the cyclic fatigue fracture of NiTi file in the curved canal,. On this device, NiTi files were rotated (300rpm) with different pecking distances (3 mm or 6 mm) and with different motions (static motion or dynamic pecking motion) . Time until fracture occurs was measured. The results demonstrated that cross-sectional area didn't have any effect on the time of file fracture. Among the files, $Profile^{(R)}$ took the longest time to be fractured. Between the pecking motions, dynamic motion took the longer time to be fractured than static motion. There was no significant difference between the pecking distances with dynamic motion, however with static motion, the longer time was taken at 3mm distance. In this study, we could suggest that dynamic pecking motion would lengthen the time for NiTi file to be fractured from cyclic fatigue.

• Journal of Korean Society of Transportation
• /
• v.24 no.6 s.92
• /
• pp.7-19
• /
• 2006

Due to the continuous expansion of the highway, the opening of the high-speed railway(KTX), etc, the demands of domestic air transport decreasing. In the circumstances, airports and local governments are spending themselves in taking a measure to activate local airports. In this aspect, this study seeks the smooth flow of human movement through the activation of Daegu International Airport by analyzing the present condition of Daegu International Airport in relation to the appearance of the high-speed railway, deducing plans for activating airports, and presenting the roadmaps for long-, mid- and short-term roles for the development of Daegu Airport, and Presents substantial fulfilling plans to secure the competitive power of Daegu International Airport by speeding up the flow of air goods of the area for the long run. It is suggested in the study that by setting up an organization exclusively responsible for activating Daegu International Airport in the city of Daegu, supporting local travel agencies to promote consistent demands, supporting aviation companies to employ Daegu International Airport as a major air base, establishing airlines with priority for airports that open newly in local cities of Japan and establishing and expanding airlines in China areas be promoted actively. Ministry of Construction & Transportation makes it a means of main airport Policy to only support Incheon International Airport to be a hub. However not only Incheon International Airport should be an amok representing the country, but also the wide Metropolitan area should supply the demands, and airports based in the West and East Coast areas need to be developed in the future. It is suggested that since air demands of domestic local airports are based on the demands of the of gin destination in neighboring region, multiple bases need to be developed. It is suggested that by developing not 1 in mega hub (Incheon International Airport) but 1 in mega hub. 2 in regional hub (the West and East Coast) and Jeju foy the tourism hub in our developing airports system.

• Journal of Service Research and Studies
• /
• v.12 no.4
• /
• pp.94-105
• /
• 2022

Urban Air Transportation (UAM) is a three-dimensional transport within the city using eVTOL as an alternative to the saturation of land transportation due to overcrowding in major cities around the world. Design has played its roles in various fields in the development of transport, but research on the design application of UAM, which will be commercialized soon, is insufficient. Accordingly, there is a growing need for prior research on the forecasting the future environment and the design application through phenomenon analysis. The purpose of this study is to derive mega trends through STEP analysis for UAM and present ways to apply design in the UAM field based on this. The research method was conducted in the following order. First, the theoretical background of UAM was established by analyzing prior art documents on UAM. Second, five trends in the future environment centered on UAM were derived through STEP analysis. Finally, in order to derive a design application, five experts in each design area (product, visual, video, environment, service) discussed the design application focusing on the results of STEP analysis and derived a design application plan for each design area in the UAM field. Through this study, it was found that the most frequent design area in the STEEP analysis is product design and service design, and therefore related design development is important. After analyzing UAM's information provision plan, display method, and usage process suggested in this study, it is expected that it will lead to various prior design studies related to UAM, such as customized service design, to establish an infrastructure environment for commercialization of UAM.