• Journal of Microbiology and Biotechnology
• /
• v.12 no.2
• /
• pp.258-267
• /
• 2002

A flux determination methodology has been built which enables to develop constrained stoichiometric relationships and metabolic balances. The analysis differs from those developed for anaerobic growth conditions in that cell mass formation is a significant sink for carbon. When combined with experimental measurements, a determined system of equations results yielded tricarboxylic acid (TCA) cycle and glycolytic fluxes. The methodology was implemented to determine the fluxes of E. coli B/r and K12, and it was found that as the growth rate in a glucose minimal medium increased, the cells became increasing glycolytic and the TCA fluxes either leveled off or declined. The pattern identified for the TCA fluxes corresponded to ${\alpha}$-ketoglutarate dehydrogenase's induction-repression pattern, thereby suggesting that the induction-repression of the enzyme could result in significant flux changes. When the minimum flux solution was contrasted to the glycolytic and TCA fluxes determined, two observations were made. First, the minimum flux could provide the cell's biosynthetic ATP requirements. Second, at a high growth rate in a glucose medium, the excess glycolytic flux exceeded that of the TCA cycle, which appeared to more closely match the biosynthetic needs.

• The Korean Journal of Food And Nutrition
• /
• v.36 no.5
• /
• pp.354-359
• /
• 2023

A mono-type glycerine fatty acid ester compound was chemically synthesized using medium-chain fatty acids with antibacterial activity, and the physicochemical quality and antibacterial activity of the synthesized glycerine medium-chain fatty acid ester compound were measured. At a reaction molar ratio of MCT(medium chain triglyceride) to glycerine of 1:2.5, 48.15% mono ester was produced. The physicochemical analysis of the synthesized glycerine fatty acid ester compound showed an acid content of 0.38~0.60%, which tended to increase slightly as the glycerine molar ratio increased. The saponification value decreased as the synthesized molar ratio of glycerine increased from 218 to 284. The number of bacteria was measured to confirm the degree of antibacterial activity of glycerine medium-chain fatty acid esters against food poisoning bacteria, Bacillus cereus and Salmonella typhi. The number of bacteria significantly decreased as the MCT:glycerine molar ratio increased. In particular, the antibacterial effect between the treatment groups was the highest when at an MCT:glycerine molar ratio of 1:2.5.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.385-393
• /
• 2019

Potential fire, explosion and safety hazards exist in medium- or small-scale chemical plants using radical batch reaction processes due to the various conditions of materials, works or products. To minimize the potential damage, a study was conducted on qualitative hazard analysis using the HAZOP technique, which is a typical method for a qualitative risk assessment and analysis of the potential risks encountered in these chemical plants. For this purpose, a domestic chemical plant, which produces the acrylic resin by a radical batch reaction process, was selected and a risk assessment and analysis according to the procedure of HAZOP method was performed for the process. As the result of the study, to prevent the hazard, the input of inert gas and the installation of a pressure gauge were indispensable. In addition, the initiator and monomer should also be separated, and inhibiting substances and equipment are also necessary to prevent a runaway reaction.

• Journal of the Korean Society of Safety
• /
• v.33 no.5
• /
• pp.150-156
• /
• 2018

As the types and usage of chemical increase, modern countries should protect their health and environment from the risk of hazardous chemical. Chemical accidents not only affect humans but also cause huge losses to the environment. Moreover, since its effects do not end in a short period of time, it is necessary to identify the extent of the damage and establish a prevention and response system in advance. In 2015, the Chemical Substances Management Act provided a system for assessing the impact on the people and the environment around the workplace. However, it is difficult to quantitatively evaluate the impact on environmental factors such as vegetation and aquatic, with the current hazard assessment methods. The purpose of this study is to analyze the quantitative risk of environmental receptors. This study improved the existing risk assessment formula by using the environmental vulnerability index and established the end point concentration criterion which can estimate the damage range to environmental media. To verify the results of the study, a virtual accident scenario was selected and a case study was conducted. As a result, the extent of impact on the environmental medium can be calculated, and the degree of environmental risk of the zone can be quantified through the risk analysis considering the environmental vulnerability. This study is expected to increase the reliability of the reliability of the existing risk anaylsis method beacause it is a risk analysis method that can be applied when the environmental factors are absolutely necessary and when the residents and environment are complex.

• Environmental Engineering Research
• /
• v.24 no.2
• /
• pp.271-278
• /
• 2019

Mass cultivation of microalgae is necessary to achieve economically feasible production of microalgal biodiesel. However, the high cost of nutrients is a major limitation. In this study, corncob extract (CCE) was used as an inorganic and organic nutrient source for the mass cultivation of Chlorella vulgaris (C. vulgaris). Chemical composition analysis of CCE revealed that it contained sufficient nutrients for mixotrophic cultivation of C. vulgaris. The highest specific grow rate of C. vulgaris was obtained at pH of 7-8, temperature of $25-30^{\circ}C$, and CCE amount of 5 g/L. In the analysis using various growth models, Luong model was found to be the most suitable empirical formula for mass cultivation of C. vulgaris using CCE. Analysis of biomass and production of triacyglycerol showed that microalgae grown in CCE medium produced more than 17.23% and 3% more unsaturated fatty acids than cells cultured in Jaworski's Medium. These results suggest that growing microalgae in CCE-supplemented medium can increase lipid production. Therefore, CCE, agricultural byproduct, has potential use for mass cultivation of microalgae.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.418-418
• /
• 2005

• Korean Journal of Environmental Agriculture
• /
• v.23 no.1
• /
• pp.68-74
• /
• 2004

Miscanthus purpurascens Juice containing potassium (37,952 mg/L), nitrogen (14,000 mg/L), phosphorus (6,800 mg/L), magnesium (5,969 mg/L), calcium (5,910 mg/L), etc., was investigated to develop a novel meidum far the mass cultivation of useful microorganisms. For this research, we first isolated an antagonistic bacterium G-74 from soil, which showed strong growth inhibition against two phytopathogenic fungi, Rhizoctonia solani and Botrytis cinerea, and identified as Bacillus lentimorbus G-74 based on the morphological characteristics and MIDI analysis. Culture conditions for G-74 strain in the M. purpurascens juice medium were optimized. Dilution rate of the medium, temperature and initial pH for the optimum growth of G-74 strain were 30% (V/V), $35^{\circ}C$ and 5.0, respectively. It was found that additions of 2.0% (W/V) corn starch as a carbon source and 1.0% (W/V) yeast extract as a nitrogen source in this medium increased B. lentimorbus G-74 growth to 66% more efficient than Luria Bertani medium.

• The Plant Pathology Journal
• /
• v.24 no.2
• /
• pp.191-201
• /
• 2008

Bacillus sp. SB-007 was isolated from pea leaves harvested from the southwestern parts of South Korea through screening on a minimal medium containing 0.2% purified cutin for its ability to induce the cutinase production. However, no cutinase was produced when it was grown in a minimal medium containing 0.2% glucose. A proteomic approach was applied to separate and characterize these differentially secreted proteins. The expression level of 83 extracellular proteins of the cutinase-producing Bacillus sp. strain SB-007 incubated in a cutinase-induced medium increased significantly as compared with that cultured in a non cutinase-induced medium containing glucose. The extracellular proteome of Bacillus sp. SB-007 includes proteins from different functional classes, such as enzymes for the degradation of various macromolecules, proteins involved in energy metabolism, sporulation, transport/binding proteins and lipoproteins, stress inducible proteins, several cellular molecule biosynthetic pathways and catabolism, and some proteins with an as yet unknown function. In addition, the two protein spots showed little similarities with the known lipolytic enzymes in the database. These secreted proteome analysis results are expected to be useful in improving the Bacillus strains for the production of industrial cutinases.

• Macromolecular Research
• /
• v.16 no.5
• /
• pp.399-403
• /
• 2008

Monodisperse, micron-sized, hybrid particles having a core-shell structure were prepared by coating the surface of poly(methyl methacrylate)(PMMA) microspheres with silica and by copolymerizing acrylamide (AAm) to supply the hydrogen bonding effect by means of the amide groups. Tetraethoxysilane (TEOS) was then slowly dropped onto the medium under certain conditions. Because of the hydrogen bonding between the amide of the PMMA particles and the hydroxyl group of the hydrolyzed silanol, a silica shell was generated on the PMMA core particles. The morphology of the hybrid particles was investigated with transmission (TEM) and scanning (SEM) electron microscopy as a function of the medium conditions and the amount of TEOS. Improved thermal properties were observed by TGA analysis.

• Korean Chemical Engineering Research
• /
• v.57 no.5
• /
• pp.723-729
• /
• 2019

A theoretical analysis was conducted of convective instability driven by buoyancy forces under transient temperature fields in an annular porous medium bounded by coaxial vertical cylinders. Darcy's law and Boussinesq approximation are used to explain the characteristics of fluid motion and linear stability theory is employed to predict the onset of buoyancy-driven motion. The linear stability equations are derived in a global domain, and then cast into in a self-similar domain. Using a spectral expansion method, the stability equations are reformed as a system of ordinary differential equations and solved analytically and numerically. The critical Darcy-Rayleigh number is founded as a function of the radius ratio. Also, the onset time and corresponding wavelength are obtained for the various cases. The critical time becomes smaller with increasing the Darcy-Rayleigh number and follows the asymptotic relation derived in the infinite horizontal porous layer.