• 한국의상디자인학회지
• /
• 제17권4호
• /
• pp.31-39
• /
• 2015

A special medical compression garment has been developed to be worn after surgery or treatment using an elastic fiber in which the amount of compression can be adjusted to a specified targeted area to reduce the formation of hypertrophic scarring. In order to develop this medical compression garments, specialized technical skill in fiber, compression class and body measurements are needed. This study provides product survey data for the development of medical compression garments. An investigation analyzed medical compression garments of 16 brands from 6 countries sold in the Korean market & online, such as Make Me Heal, Jobst, Bio Concepts, Design Veronique$^{(R)}$ Nouvelle and Leonisa$^{(R)}$ (USA), Respire(Germany), Malcom$^{(R)}$, Holistic garments and Jobskin(UK), Technomed, kanav Healthcare and Sindhoori surgicals(India), Soo medical and C&C medical(Korea), Secondskin(Australia). The main fibers of compression garments were nylon and spandex: in addition, the fiber content was different by country and brand. The number of compression classes of products was USA(4), UK(4), and India(4). For body measurements, USA and many brands used (bust, under bust, waist, hip, thigh, knee, calf, ankle, upper arm, elbow, wrist, armhole bicep) circumference and length.

• 한국의류학회지
• /
• 제41권1호
• /
• pp.60-70
• /
• 2017

This study selects representative materials and sewing methods used to: produce medical compression clothing in domestic garment, understand physical properties according to sewing conditions before and after knitting, and propose a sewing method that can improve the functional properties of the medical pressure clothing for burn patients. This experiment used samples from two knitted fabrics of high-frequency, produced and sold among fabrics used to produce medical compression clothing in Korea. Sewing methods were N321, N502 and N601, most commonly used in the press clothing industry. Fabric A is most often reduced in EMT values when sewing N502. However, N321 and N502 are suitable sewing methods for the reliable to twist at the larger torsional shear and the larger 2HG, 2HG5 value. Fabric B is sewn with N601, the EMT value is the most elevated, LT value is also low and extensibility improves after sewing. N601 is shown as an appropriate sewing method for warp knitting. When sewing with N321, the torsional is stable but elongation is lacking. N502 is not good for torsional stability.

• 복식문화연구
• /
• 제19권2호
• /
• pp.334-345
• /
• 2011

A study on compressive garments guarantee the required pressure and form depending on the type of disease and the state of injury can be used in the preventive treatment of cardiovascular disease. This research is to provide a preliminary data to develop medical clothing products, especially knitted compression garments. Starting from analyzing knitted structure of imported pressure goods to apply to test samples, 11 kinds of knitted stretchy fabrics were manufactured under the various knitting conditions, then their tensile, mechanical and hand properties were measured. In comparison size changes by knitting structure, tuck stitch applied structure showed an increase in course direction and decrease in wale direction. Float stitch applied structure indicated the contraction of size in width because of unformed loops and floated yarn on the technical back of fabric. As a result of tensile properties in tuck and float applied structure, tensile strength was increased in the course direction. On the other hand, the more loops overlapped due to the tuck and float stitch, the more decreased their elongation and elastic recovery were. In case of mechanical properties, as the tuck and float stitch were overlapped double or triple the bending and shearing properties were risen. Accordingly, the drape of fabric becomes stiff, and its surface becomes rough and uneven. The measurements of hand properties showed that the value of KOSHI, FUKURAMI NUMERI in tuck and float applied structure are higher than the plain structure. This results from the relationship between the mechanical and hand properties.

• 한국의상디자인학회지
• /
• 제21권4호
• /
• pp.55-67
• /
• 2019

This study analyzed the fabric and product size of the burn patient's custom compression garment and measured the pressure applied by the garment to assess whether proper pressure is being delivered for treatment. The test clothes were presented to the market by body size and commissioned with the same design. The subjects selected four people close to the average body size of men in their 20s determined by 7th Size Korea. The experiment was conducted by wearing a compression suit, performing activities and measuring changes in the pressure of the garment according to changes in posture. The fabric used for the compressive clothing was not ruptured even at 216 kPa, the elasticity recovery rate was measured between 80.5 and 94.5%. The product dimensions of the experimental clothing varied by up to 8cm from brand to brand, requiring the standardization of compression clothing. The experiment showed that four types of compression suit varied in pressure, and the pressure range, excluding the gastric arm (17.9mmHg), was between 2.5-14.1mmHg, which failed to meet the level of pressurization for treatment purposes. The clothing pressure in the chest area dropped when performing movements rather than standing still. This was interpreted to be a result of reduced the adhesion of the compression suit during operation. The peak pressure (31.68mmHg) and the lowest pressure (2.2mmHg) was noted in the scapula, indicating that no pressure was being transmitted on the vertebrae. The pressure of the garment on the right shoulder blade was elevated in a supine position. Because much time is spent laying down, it is necessary for the pattern design to accommodate for the increased clothing pressure on the shoulder blades. Standardization of the level of pressurization for burn patient's custom-made pressure suits for each stage of treatment is urgently required.

• Archives of Plastic Surgery
• /
• 제51권2호
• /
• pp.212-233
• /
• 2024

This is a retrospective review of surgical management for primary lymphedema. Data were extracted from 55 articles from PubMed MEDLINE, Web of Science, SCOPUS, and Cochrane Central Register of Controlled Trials between the database inception and December 2022 to evaluate the outcomes of lymphaticovenous anastomosis (LVA) and vascularized lymph node transfer (VLNT), and outcomes of soft tissue extirpative procedures such as suction-assisted lipectomy (SAL) and extensive soft tissue excision. Data from 485 patients were compiled; these were treated with LVA (n = 177), VLNT (n = 82), SAL (n = 102), and excisional procedures (n = 124). Improvement of the lower extremity lymphedema index, the quality of life (QoL), and lymphedema symptoms were reported in most studies. LVA and VLNT led to symptomatic relief and improved QoL, reaching up to 90 and 61% average circumference reduction, respectively. Cellulitis reduction was reported in 25 and 40% of LVA and VLNT papers, respectively. The extirpative procedures, used mainly in patients with advanced disease, also led to clinical improvement from the volume reduction, as well as reduced incidence of cellulitis, although with poor cosmetic results; 87.5% of these reports recommended postoperative compression garments. The overall complication rates were 1% for LVA, 13% for VLNT, 11% for SAL, and 46% for extirpative procedures. Altogether, only one paper lacked some kind of improvement. Primary lymphedema is amenable to surgical treatment; the currently performed procedures have effectively improved symptoms and QoL in this population. Complication rates are related to the invasiveness of the chosen procedure.