• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1071-1080
• /
• 2017

Recently, the terms of the 4th Industrial Revolution and the Smart Factory are often heard through news and media. But most of the companies that are parties are not interested. Because there is no specific guidance on how to build Smart Factory and information about Smart Factory. The built of the Smart Factory should be carried out in accordance with the size of the company considering the purpose of the introduction. In the existing study, they analyzed successful cases of building Smart Factory in Korea As a result, in the case of large-size firms, it is an effective strategy that expanding from a model factory to whole factory for successful Smart Factory building. In addition, in the case of medium and small-size firms, it is an effective strategy that upgrading from low-level step to high-level step for successful Smart Factory building. In this study, selecting medium and small-size firms, and bottleneck section and processes requiring improvement are identified through 3D virtual process design, and then install sensors. Finally, after analyzing the data collected through the sensor, we will improve the process and build Smart Factory with improved productivity.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.4
• /
• pp.278-286
• /
• 2011

Introduction: This study examined the predictability of new bone formation in the pneumatized maxillary sinus using only fibrin-rich blocks with concentrated growth factors as an alternative to bone grafts. Materials and Methods: Maxillary sinus augmentation was performed in thirty-three patients with a deficient alveolar bone height (mean 3.9 mm). All patients were treated consecutively with sinus membrane elevation via the lateral window approach and panoramic radiograms and cone-beam computed tomograms were taken to evaluate the remaining bone height and the new bone formation in the maxillary sinus, before and after surgery. Four biopsy specimens were taken at the time of implant consolidation (after an average of five months healing) and were stained by H & E and Trichrome staining. Results: None of the patients had postoperative complications during implant consolidation. After an average of 5 months since sinus augmentation, newly formed bone was observed in all cases by a radiographic evaluation. In 4 biopsy samples, newly formed bone was observed along the floor of the replaced bony window. The osteoblast lining and well distinguished Osteocytes in the lacunas were observed in the newly formed bone. Of the 74 implants (4 different surfaced implants - resorbable blast media-surfaced (RBM), Hydroxyapatite (HA) coated, acid-etched, sintered porous-surfaced implant) placed, one RBM implant failed. The success rate was 98.6% after a mean of 15 months. Discussion: These results suggest that maxillary sinus augmentation using fibrin rich block with concentrated growth factors is a successful and predictable technique.

• Journal of Digital Contents Society
• /
• v.18 no.2
• /
• pp.311-317
• /
• 2017

A drama, generally composed of dozens of times, is one of the most popular broadcasting program genres, and it has the characteristics that the status and interrelationships of characters are changing as time goes on and important acts affecting the story occur sporadically. Therefore, when viewers missed some times in the middle of a drama, it is difficult to understand the drama without the changed information on the characters and notable actions. This paper proposes a data service which provides the updated information of the characters and important acts based on the drama scene. The data service has the characteristics that it provides the information on the characters shown in the current drama scene, and the information about the people mentioned in the dialogue in the scene. This paper includes a general introduction to the data services, the formal definition of the drama scene identification and character information, and an DVB-SI-based method for transmitting the information to the data service.

• Journal of Advanced Research in Ocean Engineering
• /
• v.2 no.4
• /
• pp.158-168
• /
• 2016

During the installation of crude oil or gas pipelines, which pass through onshore buried pipelines or onshore pipeline from subsea pipeline to onshore plant, countermeasures need to be implemented so as to ensure a sufficient design life by protecting the steel pipes against corrosion. This can be achieved through impressed current cathodic protection method for onshore pipelines and through galvanic sacrificial anode corrosion protection method for offshore pipelines. In particular, in the case of impressed current cathodic protection, isolation joint flanges should be used. However, this makes maintenance control difficult with its installation having a negative impact on price. Therefore, in this study, the most suitable methodology for onshore pipeline protection between galvanic sacrificial anode corrosion protection and impressed current cathodic protection method will be introduced. In oil and gas transportation facilities, the media can be carried to the end users via onshore buried and/or offshore pipeline. It is imperative for the field operators, pipeline engineers, and designers to be corrosion conscious as the pipelines would undergo material degradations due to corrosion. The mitigation can be achieved with the introduction of an impressed current cathodic protection method for onshore buried pipelines and a galvanic sacrificial anode corrosion protection method for offshore pipelines. In the case of impressed current cathodic protection, isolation joint flanges should be used to discontinuity. However, this makes maintenance control to be difficult when its installation has a negative impact on the price. In this study, the most suitable corrosion protection technique between galvanic sacrificial anode corrosion protection and impressed current cathodic protection is introduced for (economic life of) onshore buried pipeline.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.1
• /
• pp.43-49
• /
• 2006

Fractal/angle multiplexing is a $LiNBO_3$ crystal using a X-Y Galvano mirror, and the random access concept in fractal/angle multiplexing are discussed in this paper. First, the brief introduction of the designed holographic digital data storage system is presented. Then, the average access time concept for the storage system is newly defined, and the comparison of the average access time between the holographic storage and a conventional optical disk is performed. Second, the basic simulation and experiment to find the X-Y Galvano mirror dynamics are conducted. From this analysis, we find that the average access time in our HDDS which has 6 degree scan angle is about 5 msec. This result is very high performance when it compared with the average access time of a conventional optical disk. Finally, some recording results using fractal/angle multiplexing are presented, then, the relationship between bit error rate and angle mismatch for the each multiplexing are discussed.

• Current Research on Agriculture and Life Sciences
• /
• v.32 no.3
• /
• pp.155-158
• /
• 2014

Phytoextraction is a technique that uses plants to remediate metal-contaminated soils. However, this technique cannot be applied in highly metal-contaminated areas, as plants cannot normally grow under such conditions. Therefore, this study investigated the introduction of various biodegradable chelating agents to increase the bioavailability of metals in highly metal-contaminated areas. Mercury (Hg) was selected as the target metal, while cysteine (Cys), histidine (His), malate, succinate, oxalate, citrate, and ethylenediamine (EDA) were used as biodegradable chelating agents. Plants were grown on agar media containing various chelating agents and Hg to analyze the effect on plant root growth. Cys and EDA were both found to diminish the inhibitory effect of Hg on plant root growth, whereas His, citrate, and ethylenediamine tetraacetic acid (EDTA) did not show any significant effects, and malate, succinate, and oxalate even promoted the inhibitory effect of Hg on plant root growth. Thus, Cys and EDA would seem to be promising biodegradable chelating agents for highly Hg-contaminated areas.

• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.5
• /
• pp.329-339
• /
• 2019

Recently, the advancement of information and communication technology(ICT) is expanding the connectivity through Internet of Things(IoT), and the media of connection is also expanding from wire/cable transmission to broadband wireless communication, which has significantly improved mobility. This hyperconnectivity has become a key element of the fourth industrial revolution, whereas the supervisory control network of purification plants in korea is operated as a communication network separated from the outside, thereby lagging in terms of connectivity. This is considered the best way to ensure security, and thus there is hardly any consideration of establishing alternatives to operate an efficient and stable communication network. Moreover, security for management of a commercialized communication network and network management solution may be accompanied by immense costs, making it more difficult to make new attempts. Therefore, to improve the conditions for the current supervisory control network of purification plants, this study developed a industrial security L2 switch that supports modbus TCP(Transmission Control Protocol) communication and encryption function of the transmission section. As a result, the communication security performance improved significantly, and the cost for implementing the network management system using Historical Trend and information of HMI(Human Machine Interface) could be reduced by approximately KRW 200 million. The results of this study may be applied to systems for gas, electricity and social safety nets that are infrastructure communication networks that are similar to purification plants.

• Journal of Soil and Groundwater Environment
• /
• v.25 no.2_spc
• /
• pp.86-100
• /
• 2020

Analyzing and monitoring environmental contaminants based on geophysical exploration techniques have become important and it is now widely applied to delineate spatial distribution geophysical characteristics in wide area. Among the techniques, induced polarization (IP) method, which measures polarization effects on electrical potential distribution, has drawn much attention as an effective tool for environmental monitoring since IP is sensitive to changes in biochemical reactions. However, various reactions stemming from the presence of multiple contaminants have greatly enhanced heterogeneity of polluted sites to result in highly variable electrical characteristics of the site. Those contaminants influence chemical and physical state of soil and groundwater to alter electrical double layer, which in turn influences polarization of the media. Since biochemical reactions between microbes and contaminants result in various IP effects, IP laboratory experiments were conducted to investigate IP responses of the contaminated soil samples under various conditions. Field IP surveys can delineate the spatial distribution of contamination, while providing additional information about electrical properties of a target medium, together with DC resistivity. Reviewing IP effects of contaminants as well as IP surveys can serve as a good starting point for the application of IP survey in site assessment for environmental remediation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.675-678
• /
• 2014

One time, Home video game console's penetration was as comparable to the personal computer's penetration, growth has slowed since the advent of smartphones, tablets and moblie devices. But game console actively introducing new IT technologies not available in the pc games and mobile games, still keeping a firm position in the relevent market. In this paper Home video game console's history, contemporary trends, and learn about trends in the company, New IT technologies applied to gaming was analyzed. Home video console market become the arena of New IT technologies according to the introduction of New IT technologies such as gesture recognition technology, speech recognition technology, media facade technology, virtual reality technology.

• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2021

Recently, incidents such as proxy surgery (unlicensed medical practice) have been reported in the media that threaten the safety of patients. Alternatives such as the introduction of operating room surveillance camera devices to prevent proxy surgery are emerging, but there are practical difficulties in implementing them due to strong opposition from the medical community. However, the social credibility of doctors is falling as incidents such as proxy surgery occur frequently. In this paper, we propose a medical staff identification system combining Beacon and iris recognition. The system adds reliability by operating on the blockchain network. The system performs primary identification by performing user authentication through iris recognition and proves that the medical staff is in the operating room through beacons. It also ensures patient trust in the surgeon by receiving beacon signals in the background and performing iris authentication at random intervals to prevent medical staff from leaving the operating room after only performing initial certification.