• 제목/요약/키워드: Media Flow

검색결과 944건 처리시간 0.026초

톨루엔으로 오염된 공기의 생물학적 여과에 대한 필터용 담체의 영향 (The Effect of Filter Media on the Biofiltration of Air Contaminated by Toluene)

  • 홍성도;한희동;명성운;최호석;김인호
    • KSBB Journal
    • /
    • 제16권6호
    • /
    • pp.603-608
    • /
    • 2001
  • 낮은 농도 (0.41 g/㎥)에서 바이오필터 장치의 제거효율은 5 L/min과 10L/min에서 각각 30~70% 이상을 보여주는 반먼에 고농도 (1.23 g/㎥)에서의 효율은 10~60%이다. 그리고 Synthesized media를 담체로 사용한 바이오필터의 성능이 다른 바이오필터에 비하여 좋지 않았으며, barks를 사용한 바이오필터에 비하여 좋지 않았으며, barks를 사용한 바이오필터의 제거율이 입구농도 0.8g/㎥에서 약 70%로 가장 좋은 성능을 보였다. 이는 합성담체가 porous하여 그 보습능력이 다른 담체들에 비하여 떨어지기 때문임을 알 수 있었다. 바이오필터가 제거할 수 있는 공기중의 톨루엔양은 입구의 단위 시간당 농도를 증가시킴으로써 제거량이 증가함으로 알 수 있었으며, barks를 담체로 사용한 바이오필터의 제거량이 유입 부하량 40 g/㎥에서 최대 30 g/㎥으로 가장 우수한 것으로 나타나, 수분 및 활성의 유지가 안돼는 악의 조건하에서의 바이오필터 적응능력 면에서는 bark를 사용하는 것이 가장 바람직함을 알 수 있었다. 한편 바이오필터의 우수한 거동을 위해서는 필터층의 적당한 수분함량 조절이 가장 필수적이며, 각 바이오필터의 pH 변화는 7~8로써, 중성영역을 유지하는 것이 바람직하였다. 모든 바이오필터 시스템에서 압력강하는 0.054 cm$H_2O$/m로서 무시할 만큼 낮았고, 특히 합성담체의 경우에 다른 담체들에 비하여 압력손실이 현저히 낮았다.저히 낮았다.

  • PDF

압축성 여재 여과를 이용한 하수의 고형물질 제거 타당성 연구 (Feasibility Study on Removal of Total Suspended Solid in Wastewater with Compressed Media Filter)

  • 김예슬;정찬일;오재일;윤여민
    • 대한환경공학회지
    • /
    • 제36권2호
    • /
    • pp.84-95
    • /
    • 2014
  • 최근 미국과 일본을 중심으로 높은 공극과 압축성이라는 장점을 지닌 압축성 섬유여재 여과에 대한 다양한 기술이 개발되면서 이를 이용한 집약적 하 폐수 처리에 대한 관심이 높아지고 있다. 이에 따라 본 연구에서는 다양한 유입수질의 하수에 대하여 압축성 섬유여재 여과의 적용성을 검토하고자 하며, 해당 유입수에 대한 최적의 운전조건을 도출하고자 한다. 이를 위하여 예비 실험으로서 추적자 시험을 진행하였으며, 이를 통하여 다양한 압축률 및 여과율에서의 여과 양상을 검토하였다. 그 결과 높은 압축률에서 높이에 따라 다른 공극률이 적용되어 이론적인 결과값과의 뚜렷한 차이를 관찰할 수 있었다. 하수처리장의 침사지 유출수를 대상으로 다양한 압축률 조건에서 압축성 섬유여재 여과의 TSS 제거 및 제거 입자크기분포를 살펴본 결과, 압축률 30%가 최적의 운전조건으로서 제거효율 70% 이상을 나타냈으며, 작은 크기의 입자 제거율 증대를 위해 최소 15% 이상의 압축률이 요구되었다. 또한 여과 유출수 농도의 주요 영향인자인 $10{\mu}m$ 이하 입자의 제거 효율을 증대시키기 위해서는 응집과 같은 추가 공정이 필요하다고 판단되었다. 모델링 결과를 통하여 압축률이 증가할수록 여과 초기에 입자 크기에 따른 TSS 제거효율이 두드러지게 나타남을 관찰하였고, 유입수의 입자크기분포에서 가장 큰 비율을 차지하는 $10{\mu}m$ 크기 입자를 대상으로 높이에 따른 모델링 결과 높이 150-300 mm 여재층이 해당 입자 크기에 대하여 가장 활발한 여과 작용을 나타내었다.

개 연골세포의 손상에 의한 Tartrate Resistant Acid Phosphatase 활성의 변화 측정 (The Change of Tartrate Resistant Acid Phosphatase Activity in Capsaicin-Induced Canine Chondrocyte Death)

  • 설재원;이해범;김남수;김인식;강형섭;이영훈;강동원;박상열
    • 한국임상수의학회지
    • /
    • 제23권2호
    • /
    • pp.144-148
    • /
    • 2006
  • Apoptotic death of articular chondrocytes has been implicated in the pathogenesis of osteoarthritis. Tartrate resistant acid phosphatase (TRAP) has been used for several years as a marker enzyme of bone-resorbing osteoclasts. This study investigated the activity of TRAP in media of apoptotic cell death-induced canine chondrocyte. We exposed canine chondrocyte to capsaicin and the results showed that capsaicin induced cell death in a dose dependent manner. And we measured TRAP activity in media of chondrocyte death induced by capsaicin treatment and the results capsaicin significantly increased the activity of TRAP in media for dose dependent. We also investigated whether the combination treatment with capsaicin and TRAIL enhance apoptotic cell death in canine chondrocyte. We exposed canine chondrocyte to capsaicin for 24 hrs at the indicated dose, and then treated with recombinant TRAIL protein for 24 hrs. TRAIL alone did not induce cell death after 24 hours, but the combined treatment of both induced more cell death compared with capsaicin alone in a dose dependent manner. Also, the combination treatment with capsaicin and TRAIL increased the activity of TRAP in culture media. These results suggest that TRAP can flow out into extracellular after chondrocyte damage, and TRAP may be a successful biomarker for detection of joint disease such as osteoarthritis.

지구통계 및 다중 유체 거동 모사에 근거한 스팀주입중력법 적용 최적지 결정 척도 개발 연구 (A Comparative Study on the Measures Determining Optimal SAGD Locations Based on Geostatistical and Multiphysics Simulations)

  • 권미진;정진아;이현석;박진백;박은규
    • 자원환경지질
    • /
    • 제50권3호
    • /
    • pp.225-238
    • /
    • 2017
  • 본 연구에서는 스팀주입중력법 (Steam Assisted Gravity Drainage, SAGD)을 이용한 오일샌드 개발 시 적지 선정을 위한 대안적 척도가 제시되었다. 기존 SAGD 공법 적용 시 스팀주입효율이 우수한 지역을 선정하기 위해 비투멘이 함유될 가능성이 큰 고투수성 퇴적층의 누적 층후가 주로 이용되었다. 그러나 고투수성 퇴적층의 누적 층후 외에도 수직 평균거리 또한 스팀주입효율에 큰 영향을 미칠 것으로 판단하였다. 따라서 본 연구에서는 해당 두 가지 척도(즉, 누적 층후도 및 수직 평균거리)가 SAGD 스팀주입효율에 미치는 영향에 대한 비교 및 분석이 이루어졌다. 이를 위해, 구성 암상 간 특정 전이확률을 기반으로 발생시킨 누적 층후 및 수직 평균거리가 상이한 다양한 가상의 2차원 저류층에 대해 고온 고압 증기 주입 모사를 실시한 후 생성된 스팀챔버의 크기를 비교 및 분석하였다. 2차원 SAGD모사 결과, 투수성 퇴적층의 수직 평균두께가 두꺼운 지역이 누적 층후가 두꺼운 지역보다 더 넓은 범위의 스팀챔버를 형성하는 것을 확인하였다. 따라서 최적의 오일샌드 개발 입지 선정 시, 기존에 이용되고 있던 누적 층후뿐만 아니라 투수성 퇴적층의 수직 평균거리도 함께 고려하였을 때 더욱 적합한 SAGD공법의 최적 입지를 선정할 수 있을 것으로 판단된다.

생명정치, 몽타주, 이미지의 잠재성: 조르조 아감벤과 영화 (Biopolitics, Montage, and Potentialities of the Image: Giorgio Agamben and Cinema)

  • 김지훈
    • 비교문화연구
    • /
    • 제49권
    • /
    • pp.59-93
    • /
    • 2017
  • 이 논문은 조르조 아감벤의 미학 및 철학과 영화와의 관계를 세밀히 조명하는 것을 목표로 한다. 이를 통해 이 논문은 아감벤이 개입하거나 발전시키는 주요개념인 몸짓(gesture), 매개성(mediality), 생명정치(biopolitics), 역사성(historicity), 세속화(profanation) 등이 영화의 역사적, 미학적 범주와 연결되는 방식을 설명하고 이러한 방식이 양가성(ambivalence)이라는 관념으로 요약될 수 있음을 주장한다. 한편으로 아감벤은 영화를 비롯한 19세기의 사진 및 광학기구를 몸짓의 포획과 통제를 위한 장치로 간주함으로써 시각 미디어를 자신의 생명정치 및 스펙터클에 대한 논의와 연결시킨다. 그러나 다른 한편으로 아감벤은 영화 이미지를 비롯한 이미지 일반에 몸짓을 보존하고 회복할 수 있는 가능성이 존재한다는 의견을 피력한다. 이러한 의견은 영화의 주요한 미학적, 기술적 차원인 몽타주를 세속화의 작용으로 보는 아감벤의 사유, 그리고 몽타주가 이미지의 선형적 흐름을 중단시키고 대안적 기억을 활성화하는 방식에 대한 아감벤의 벤야민적인 사유로부터 비롯된다. 19세기 및 20세기 초의 영화를 비롯한 광학기구의 발전사 및 이미지의 중단과 반복에 근거한 습득영상(found footage) 영화제작의 사례를 제시함으로써 이 논문은 아감벤의 사유에서 중요한 지위를 차지하는 잠재성(potentialities) 개념이 영화는 물론 시각 미디어 이미지 일반에 대한 그의 논의에도 확장될 수 있음을 주장한다.

균질한 매질 내 Calcium polysulfide 주입에 따른 고농도 중금속 오염 지하수 정화 타당성 검토 (Feasibility Evaluation for Remediation of Groundwater Contaminated with Heavy Metal using Calcium Polysulfide in Homogeneous media)

  • 고현우;주진철;남경필;문희선;윤성희;이동휘;장소예
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제28권1호
    • /
    • pp.1-14
    • /
    • 2023
  • In this study, column tests using relatively uniform Jumunjin sand media were conducted to evaluate the feasibility of calcium polysulfide (CaSx, CPS) in removing high concentration of Zn2+ in groundwater. The injected CPS solution reacted rapidly with Zn2+ in artificial groundwater and effectively reduced Zn2+ by more than 99% through metal sulfide precipitation. Since the density (d = 1.27 g/cm3 ) of CPS solution was greater than that of water, CPS solution settled down rapidly while capturing Zn2+ and formed stable CPS layer similar to dense nonaqueous phase liquid. Mass balance analysis on Zn2+ in CPS solution suggested that CPS solution effectively reacted with Zn2+ to form metal sulfide precipitates except for high groundwater seepage velocity of 400 cm/d. With greater groundwater seepage velocity, injected CPS did not completely dissolve at the CPS-water interface, but a partially-misible CPS layer continuously moved and reacted with Zn2++ in the direction of groundwater flow. Since hydraulic conductivity (Kh) decreased slightly due to the generated metal precipitates in the inter-pores of media, injection of CPS solution should be optimized to prevent clogging. As evidenced by both XRF and SEM/EDS results, ZnS precipitates were clearly observed through the reaction between the CPS solution and Zn2+. Further study is warranted to evaluate the feasibility of CPS to remove high-concentration heavy metalcontaminated groundwater in complex and heterogeneous media.

화단형태의 인공지반 녹화를 위한 식재토양조성 및 관수방안 연구 (A Study for Making Planting Ground and Irrigation System for Greening Artificial Ground of Planter Type)

  • 김선혜
    • 한국환경복원기술학회지
    • /
    • 제7권6호
    • /
    • pp.12-18
    • /
    • 2004
  • This study is to make plans for perpendicular greening with artificial ground of planter type to improve urban environment. The experiments of this study are performed to find out the suitable soil and irrigation method for artificial ground of planter greening. Thereupon, organic or inorganic soil improvement material is mixed with soil of each planter as experiment, In result, the plants in soil mixed organic soil improvement material thrive rather than that in soil mixed inorganic material, It is to be desired that the planter equip with the irrigation system, be wider than planter and be planted shrubs for positive plant growth. As for irrigation system, drip irrigation is effective on plant growth southern exposure but Ebb and Flow is effective eastern exposure. Therefore, irrigation system should consist of two types above plus keeping water on the bottom of planter to save water and store rainwater.

Investigation of Water Transport in Newly Developed Micro Porous Layers for Polymer Electrolyte Membrane Fuel Cells

  • Alrwashdeh, Saad S.;Markotter, Henning;Haussmann, Jan;Hilger, Andre;Klages, Merle;Muller, Bernd R.;Kupsch, Andreas;Riesemeier, Heinrich;Scholta, Joachim;Manke, Ingo
    • Applied Microscopy
    • /
    • 제47권3호
    • /
    • pp.101-104
    • /
    • 2017
  • In this investigation, synchrotron X-ray imaging was used to investigate the water distribution inside newly developed gas diffusion media in polymer electrolyte membrane fuel cells. In-situ radiography was used to reveal the relationship between the structure of the microporous layer (MPL) and the water flow in a newly developed MPL equipped with randomly arranged holes. A strong influence of these holes on the overall water transport was found. This contribution provides a brief overview to some of our recent activities on this research field.

유한요소법을 이용한 연속주조공정의 연계해석 (Coupled Analysis of Continuous Casting by FEM)

  • 문창호;황상무
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2001년도 추계학술대회 논문집
    • /
    • pp.181-185
    • /
    • 2001
  • Three-dimensional finite-element-based numerical model of turbulent flow, heat transfer, macroscopic solidification and inclusion trajectory in a continuos steel slab caster was developed Turbulence was incorporated using the Improved Low-Re turbulence model with positive preserving approach. The mushy region was modeled as the porous media with average effective viscosity. A series of simulations was carried out to investigate the effects of the casting speed, the slab size, the delivered superheat the immersion depth of the SEN on the transport phenomena. In the absence of any known experimental data related to velocity profiles, the numerical predictions of the solidified profile on a caster was compared with breakouts data and a good agreement was found.

  • PDF

Rheological characteristics of non-spherical graphite suspensions

  • Mustafa, Hiromoto Usui;Ishizuki, Masanari;Shinge, Ibuki;Suzuki, Hiroshi
    • Korea-Australia Rheology Journal
    • /
    • 제15권1호
    • /
    • pp.19-25
    • /
    • 2003
  • Since the microstructure of functional thin films depends on the dispersion characteristics of dense slurry, it is important to control the agglomerative nature of slurries under processing. The present authors have been discussing the model prediction of agglomerative nature and local rate of agglomeration in dense suspensions. The experiments have been peformed under shear flow using the nearly spherical and oblate type graphite particles. In this study, the experiment has been conducted using water and glycerol as dispersion media. Stress control type rheometer was used to measure the slurry rheology. Local agglomeration of graphite particles has been predicted by using Usui's model. The experimental results show that both the shape and slurry processing method affect on the local dispersion condition. The agglomeration formed by oblate type graphite particles seems to be more difficult to break up than that of spherical particles.