• 에너지공학
• /
• 제23권2호
• /
• pp.114-118
• /
• 2014

The need to maximize the exhaust pipe inside surface and to minimize exhaust resistance And Find the best point between the exhaust and the duration of contact between the two surfaces. Exhaust gas mass flow On the whole cross section of catalytic converters more uniform distribution will contribute to its usability. Based on the flow rate of fluid traces given color, Exhaust fluid resistance in the porous catalyst can be estimated, from the efficiency of the catalytic converter that is very important.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.41-43
• /
• 2013

In order to simulate and visually observe combustion phenomena in cylindrical radial-flow porous inert media, a radial multi-channel burner, made of transparent quartz plates, was fabricated. Flame stabilization characteristics and its pulsating instability in the burner were experimentally investigated with respect to various mixture flow rates and equivalence ratio. As a result, five different flame behaviors, such as stable flame, pulsating instability, sudden extinction, blowout and unstable extinction, were observed. Mean radial position of circularly arranged multi-flame and its averaged burning velocity were measured and then compared to the freely propagating flame. The multi-flame pulsation frequency is about several tens of Hz and it is supposed to be generated by the heat diffusion enhancement to cold pre-mixture by the intensive gas-solid interaction.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제5권2호
• /
• pp.71-99
• /
• 2001

The model and analytical method for solving the problem of coupled fluid flow in the reservoir/well system is presented. The 3-D drainage area is composed of three connected media: the tubing, the annuli as a super conducting collector, and the reservoir itself. To couple these three types of fluid flows a non-overlapping Dirichlet-Neumann domain decomposition method is developed. The method allows us to apply an analytical hybrid simulator for accurate evaluation of the impact of main geometrical and hydrodynamic parameters of the 3-D system on the pressure drop along the horizontal well and its production index.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.815-829
• /
• 2008

Debris flows are a natural hazard which looks like a combination of flood, land and rock slide. Large rainfall in July 2006 produced several large scale debris flows and many small debris flows that resulted in loss of life and considerable property and railway damage, as was widely reported in the national media. The hazard "debris flow" is still insufficiently researched. Furthermore debris flows are very hard to predict. Flexible Ring net barriers are multi-functional mitigation devices commonly applied to rock fall or floating wood protection in floods, snow avalanches and also mud flows or granular debris flows, if properly dimensioned for the process or processes for which they are intended. Overtopping of the barriers by debris flows and sediment transport is possible, supporting the design concept that a series of barriers may be used to stop volumes of debris larger than are possible using only one barrier. The future for these barrier concepts looks promising because these barriers represent the state of art for such applications and are superior to many other available options.

• 한국압력기기공학회 논문집
• /
• 제16권2호
• /
• pp.25-34
• /
• 2020

As leakage in nuclear power plants could cause a variety of problems, it is very critical to monitor leakage from the safety point of view. Accordingly, a new type of leak detection system is currently being developed and flow characteristics of the sampling and transportation system are investigated by using numerical analysis as a part of the development process in this study. The results showed that the steam mass fraction varied according to the effect of the gap between the insulation and piping component, transportation velocity, and material properties of porous media during the sampling and transportation process. The results of this study should be useful for understanding flow characteristics of the sampling and transportation system and its design and application.

• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3390-3397
• /
• 2022

Among the different techniques available, nuclear methods, including gamma-gamma logging tools, are of special importance. Though the real environment which surrounds the drilled borehole is a complex fractured medium which the fluid can flow through the porosities, simulation studies generally use the traditional model of a homogeneous mixture of formation and the liquid. Considering a previously published study, which shows that modeling of fluid flow in fractured reservoirs and simulating the formation as an inhomogeneous fractured medium leads to different results compared with those of homogeneous mixture, here we study the effect of the presence of drilling fluid (mudcake) on the response of the detectors in both the models. To study this effect, a typical gamma-gamma logging tool was modeled by using the MCNPX Monte Carlo code. The results show that the responses of the detectors in the mixture model in the presence of various thicknesses of mudcake are sensitive to the density of the formation material. However, this effect is not notable in the inhomogeneous fractured medium. These results emphasize the importance of the model employed for simulation of the medium in gamma-gamma well-logging.

• 한국물환경학회지
• /
• 제23권5호
• /
• pp.776-780
• /
• 2007

A biofilm reactor packed with porous media was investigated for nitrogen removal of synthetic wastewater. The effect of different loading rates on the nitrification was sustained to be steady state with stable efficiency of 50~60% in the range of $0.0083{\sim}0.017gNH_4-N/gMLVSS{\cdot}day$ of F/MN ratio and $1{\sim}2kgNH_4-N/m^3{\cdot}day$ of media volumetric loading rate. However, nitrification efficiency was rapidly decreased to 25~30% as F/MN ratio and media volumetric loading rate were increased to the range of $0.025{\sim}0.034gNH_4-N/gMLVSS{\cdot}day$ and $3{\sim}4kgNH_4-N/m^3{\cdot}day$, respectively. Also the consumption rate of alkalinity was higher under 8 hours of HRT than unter 6 hours of HRT. Accordingly the influent loading rate variation by detention time with influent flow influenced more on the nitrification efficiency than the influent loading rate variation by the influent concentration did. The temperature effect on the nitrification showed 25% higher in summer than in winter as the results reported by other researchers who reported that the nitrification efficiency in biofilm showed 20% increase from 55% to 75% when the temperature was raised from $20^{\circ}C$ to $25^{\circ}C$. Denitrification with sulfur-media showed 90% removal efficiency under steady-state with no effect from the increase of influent concentration and empty bed contact time (EBCT) change such as EBCT was decreased from 8.4 hr to 4.3 hr and $NO_3-N$ loading rate was changed within the range of $0.1{\sim}0.4kgNO^3-N/m^3{\cdot}day$. Accordingly Denitrification with sulfur-media is feasible for post denitrification at the concentration less than $80mgNO^3-N/L$.

• Korean Chemical Engineering Research
• /
• 제55권4호
• /
• pp.456-466
• /
• 2017

이 연구는 교반볼밀을 이용한 금속기반 복합재 제조공정에 있어서 분쇄매체의 차이에 의한 입자형상의 변화를 관찰하고, 볼 거동의 DEM시뮬레이션을 행하였다. 교반볼밀에서 볼 거동의 3차원 시뮬레이션을 통해 분쇄메커니즘을 규명하기 위하여 분쇄매체의 힘, 운동에너지, 매체 운동속도 등을 계산하였다. 또한 복합재 제조를 위한 실험조건을 이전의 다른 볼밀에서에 같이 교반볼밀 회전속도를 변화시켰고, 볼 재질, 운동속도, 마찰계수 등도 동일한 조건으로 변화시키면서 투입되는 에너지의 변화량도 계산하였다. 교반볼밀의 회전속도가 증가함에 따라, 분쇄매체와 매체, 매체와 벽면, 그리고 매체와 교반기 사이의 충격에너지가 증가하는 것을 정량적으로 계산 할 수 있었다. 또한 같은 실험 조건에서 입자형상 변화를 명확하게 분석 할 수 있었으며, 볼 거동이 입자형상 변화에 매우 큰 영향을 미치는 것을 알 수 있었다.

• 환경영향평가
• /
• 제28권6호
• /
• pp.549-555
• /
• 2019

본 연구의 목적은 기능성 여재를 활용하여 부영양화의 원인 물질인 인(P)과 질소(N)의 제거효율을 향상 시킬 수 있는 최적의 운전 조건을 확보하기 위함이다. 본 연구에 사용된 기능성 여재의 주성분이 Si, Al, 및 Fe 이고, 석영(SiO₂), 정장석(KAlSiO₃O₈), 할로이사이트(Al₂O₃·2SiO₂), 카올린(H₃Al₂Si₂O₉), 자철석(Fe₃O₄), 버미큐라이트 등이 함유되어 있다. 여과공정의 최대 효율성을 파악하기 위해 흐름방식, 선속도, 여재두께에 따른 처리효율 실험을 진행하였다. 흐름방식은 상향류 및 하향류 조건의 두 가지 실험을 진행하였고, 선속도는 50 m/day, 100 m/day, 150 m/day, 200 m/day, 250 m/day의 조건, 여재두께는 20 cm, 40 cm, 50 cm, 60 cm, 80 cm의 조건에서 실험을 진행 하였다. 실험 결과 SS, T-N, T-P 모두 상향류 조건이 하향류 조건보다 높은 제거효율을 보였고, 선속도별 처리 효율은 SS 50 m/day, T-N 150 m/day, T-P 100 m/day에서 가장 높은 효율을 보이는 것으로 나타났다. 또한 여재두께에 따른 제거효율 분석 결과 SS, T-N, T-P 모두 60 cm에서 가장 높은 효율을 보이는 것으로 나타났다. 최적의 조건은 상향류 조건 및 60cm의 여재 두께를 설정하고 제거 목표 물질에 따라 선속도를 조절하여 처리 하는 것이 바람직하다고 사료된다.

• 유통과학연구
• /
• 제13권5호
• /
• pp.45-52
• /
• 2015

Purpose - Augmented reality (AR) content used in mobile media today can accommodate a wide variety of contextual information. This indicates that making people experience a sense of presence and flow is a very significant factor in augmented reality content. Flow represents a rich immersion potential as representing the progress of emotion and the means to facilitate the operation of the smart phone. Therefore, users will have friendly relational continuance behavior with products and brands that supply this experience. Based on that, the purpose of this study is to investigate the relationships among smart phone AR application traits, presence, flow experience, and relational continuance behavior. First, AR application traits are defined as three categories sensory immersion, navigation, and manipulation, based on preceding studies. This study then examines the influence of AR application traits on the presence and flow experience and looks into the relation among presence, flow experience, and relational continuance behavior. This analysis suggests more detailed and concentrated strategic implications. Research design, data, and methodology - A research model is designed to examine the relation among AR application traits, presence, flow experience, and relational continued behavior. For data collection, questionnaire surveys were composed of multi-items for each component and the direct interview method was used for the interviews. To collect the data, after running the smart phone AR applications, the consumer behaviors of the respondents were generally determined. The questionnaire surveys were conducted for one month, October 2014. A total of 300 questionnaires were distributed with 278 questionnaires used for analysis, excluding the unanswered and insincere questionnaires. The data were analyzed using SPSS ver. 20.0 and LISREL ver. 8.51. Results - The following results are found: First, AR application traits have a significantly positive effect on presence with sensory immersion, navigation, and manipulation all having a significantly positive effect. Second, sensory immersion and manipulation among the AR application traits have a significantly positive effect on flow. However, navigation did not have a significantly positive effect on flow. Third, presence has a significantly positive effect on flow and has a significantly positive effect on relational continuance behavior. Moreover, flow also has a significantly positive effect on relational continuance behavior. This behavior tends to be formed since brands want to encourage relational continuance behavior and positive emotions with the brands being used. Relational continuance behavior accompanies repeat purchasing, positive word-of-mouth and recommendation activities, and forms of trust with the brand. Conclusions - The research results showed that smart phone AR traits had significantly positive effect on presence, flow, and relational continuance behavior. Based on this, smart phone AR application providers should establish an aggressive marketing strategy to accommodate more realistic problems in order to positively influence user behavior. Additionally, the marketers should make efforts to provide fun or convenience in the AR application operation process of the user.