• 제목/요약/키워드: Mechanism of C.Z.M

검색결과 30건 처리시간 0.03초

국내외 연안구역관리(C.Z.M)의 특성 비교 (The Characteristics of Foreign and Domestic C.Z.M Cases)

  • 오지훈;이석환
    • 한국산학기술학회논문지
    • /
    • 제11권7호
    • /
    • pp.2693-2701
    • /
    • 2010
  • 연안구역(Coastal Zone)은 “생태 환경적으로 통합된 장”으로 해역과 육역을 포함하는 통합된 공간이며 C.Z.M은 해안자원의 보전과 활용을 위하여 체계적이고 지속적으로 연안구역(Coastal Zone)을 통합 조정할 수 있는 실행 전략시스템이다. 따라서 본 연구는 국내 외 C.Z.M을 사례로 운영과정에서 나타나는 메커니즘을 역할분담, 조정 및 협력, 참여 유도 차원에서 조사 분석하였다. 이를 통해 이 연구는 해안관리의 정책방향이 조화될 수 있도록 하는 평가체계 구축, 지속적 해안관리를 위한 안정적 지원체계 구축, 이해관계자의 협력을 도모하는 조정체계 구축, 관리역량 강화 및 참여유도를 위한 교육체계 구축 등을 선진사례의 공통된 관리특성으로 도출하였다. 마지막으로 본 연구는 국내외 연안구역관리의 메카니즘에 나타난 공통의 가치를 바탕으로, 지역차원에서 국내 연안구역(Coastal Zone)관리시스템을 올바르게 구축하기 위한 시사점을 제시하였다.

$SiC_p$ 크기를 달리한 $SiC_p$/Al2024 복합재료의 열간 변형특성에 관한연구 (A Study on Hot Deformation Behavior of $SiC_p$/AI2024 Composites Reinforced with Different Sizes of $SiC_p$)

  • 고병철;홍흥기;유연철
    • 소성∙가공
    • /
    • 제7권2호
    • /
    • pp.158-167
    • /
    • 1998
  • Hot restoration mechanism flow stress and stain of the Al2024 composites reinforced with 1,8,15,36, and $44{\mu}m\;SiC_p$(10 vol. %) were studied by hot torsion tests. The hot restoration mechanism of all the composites was found to be dynamic recrystallization(DRX) at $320^{\circ}C$ while that of the composites reinforced with 1 and $8{\mu}m\;SiC_p$ was found to be dynamic recovery(DRX) at $480^{\circ}C$. It was found that the Al2024 composite with $15{\mu}m\;SiC_p$ showed the highest flow stress(${\sim}$223 MPa) at $320^{\circ}C$ under a strain rate of 1.0/sec. Also the highest flow strain of the composites was obtained at $430^{\circ}C$. The com-posites reinforced with 1 and $8{\mu}m\;SiC_p$ showed lower flow stress and higher flow strain at $480^{\circ}C$ than those of the composites reinforced with 15, 36, and $44\;{\mu}m\;SiC_p$ These result were discussed in relation to the transition of the hot restoration mechanism. $DRX{\leftrightarrow}DRV$. The dependence of flow stress on strain rate and temperature was attempted to fit with the hyperbolic sine equation ($\dot{\varepsilon}=A[sinh({\alpha}{\cdot}{\sigma}_p]^n$ exp(-Q/RT)and Zener-Hollomon parameter($Z=\;\dot{\varepsilon}\;exp(Q/RT))$.

  • PDF

초정밀 마이크로 위치결정 스테이지의 제작 및 평가 (Experiment of the Precision micro-positioning stage)

  • 한창수;백석;노명규;이찬홍
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2002년도 춘계학술대회 논문집
    • /
    • pp.244-247
    • /
    • 2002
  • The performance of the precision micro-positioning 4-dof stage is presented. The compact design utilizes the monolithic mechanism to achieve the translation in the Z axis and rotation in the $\theta$ z, $\theta$ x and $\theta$ y axes with high stiffness and high damping. Hysteresis, nonlinearity, and drift of the piezoelectric effects are improved by incorporating the sensors in a feedback control. Experiments demonstrate that the micro-positioning stage is capable of 2nm resolution over the travel range of 25$\mu\textrm$ m in the Z axis, 0.0l7 $\mu\textrm$ rad resolution over the 170$\mu\textrm$ rad in the $\theta$ z and 0.011 $\mu\textrm$ rad resolution over the $\mu\textrm$ rad in the $\theta$ x and $\theta$ y axes. The cross-axis interferences among the axes are at a noise range. This stage is available for positioning error compensation of the XY stage with large stroke.

  • PDF

m-Methylphenyl N-methylcarbamate 유도체들의 살충활성 메카니즘 (Insecticidal Activation Mechanism of m-Methylphenyl N-methylcarbamate Derivatives)

  • 박승희;남상길;성낙도
    • 농업과학연구
    • /
    • 제22권2호
    • /
    • pp.127-133
    • /
    • 1995
  • 일련의 phenyl N-methylcarbamate 유도체들을 합성하고 ACh.E에 대한 carbamylation 과정으로 일어나는 살충활성 반응의 중심인 carbonvl group의 분자궤도(MO) 함수량과 살충활성($pI_{50}$) 값에 대한 치환기의 영향을 검토한 바, phenyl group에 결합된 치환기(X) 변화에 따른 carbonyl group의 알짜전하와 적외선 진동수($cm^{-1}$) 및 bond population에 미치는 치환기 효과(${\rho}=0$)는 관측되지 않았다. 전체 에너지(${\Delta}Et$)와 ipso $C_1-O_7$결합을 회전축으로 한 각도(${\theta}$)와의 관계로 부터 가장 안정한 형태는 평면인 phenyl group에 대하여 carbamyl group이 수직(${\theta}=90^{\circ}$ )인 (Z)-N-methyl-(Z}-O-phenylcarbamate 형태이었다. Carbamylation 과정의 1단계 평형($k_1/k_{-1}$) 반응은 thermodynamically control 반응이기 때문에 carronyl oxygene에 대한 acidic group(ACh.E)의 양성자화 반응과 Serine hydroxyl group의 친핵성 첨가반응 그리고 m-methyl group의 hyperconjugation effect에 의하여 anionic site(ACh.E)와의 상호작용으로 설명되는 일련의 새로운 carbamylation 메카니즘을 가정하여 제안하였다.

  • PDF

强酸性 溶液中에서 Cinnamonitrile의 加水分解 反應메카니즘 (Mechanism on the Hydrolysis of Cinnamonitrile in Strong Acid)

  • 권기성;성낙도;김태린;전용구
    • 대한화학회지
    • /
    • 제28권6호
    • /
    • pp.418-424
    • /
    • 1984
  • Cinnamonitrile의 산-가수분해 반응속도상수를 25$^{\circ}$C, HClO$_4$ 1 ~ 5M의 센산성 용액속에서 UV분광법으로 측정하고 Bunnett관계식에 적용하여 ${\omega}$ = 9.8, ${\omega}^*$ = 0.42 및 ${\phi}$=1.6등의 hydration parameter를 구하였다. 이는 질소원자에 양성자화가 이루어진 짝산에 대하여 속도결정단계에서 친핵체로 물분자가 첨가된 다음에 양성자 전달체로 작용한다는 것을 시사한다. Cinnamonitrile 분자의 궤도함수를 CNDO/2방법으로 계산한 바, 형태이성체의 안정도는 (E)-planar>(Z)-planar이였으며 음하전의 크기는 $C_8({\beta}){\ll}N$이였고 전이상태에서 물분자는 짝산의 양하전이 큰 $C_7({\alpha}$)원자에 대하여 ${\sigma}$접근함을 알았다. 이상의 결과로 부터, 센산성속에서 cinnamonitrile의 가수분해반응은 특정 산-촉매작용을 수반하는 A-2형의 산-가수분해 반응메카니즘에 의하여 진행됨을 알았다.

  • PDF

Aryl Benzoates와 Amine류의 반응에 관한 구조-반응성 관계 (Structure-Reactivity Relationships for the Reaction of Aryl Benzoates with Amines)

  • 정덕영;권정민;여수동;박병수
    • 대한화학회지
    • /
    • 제39권7호
    • /
    • pp.572-577
    • /
    • 1995
  • 아세토니트릴 용매계에서 aryl 치환(Z)-benzoate류와 아민류의 반응속도를 15, 25, 및 35 $^{\circ}C$에서 분광학적 방법으로 구했다. 2차 반응속도 상수로부터 Hammett $\rho$값, Bronsted ${\beta}$값, 및 활성화 parameter를 구했으며 이들값과 M-O-F-J diagram 등의 해석으로부터 본 반응은 $S_AN$ 메카니즘으로 진행됨을 알 수 있었다.

  • PDF

HIGH-RESOLUTION NEAR-INFRARED SPECTRA OF NEARBY QUASARS

  • ;박수종;임명신
    • 천문학회보
    • /
    • 제37권2호
    • /
    • pp.91-91
    • /
    • 2012
  • We present high-resolution near-infrared host galaxy spectra of low-z quasars, PG0844+349 (z=0.064), PG1226+023 (z=0.158), and PG1426+015 (z=0.086). The observation was done by using the near-IR high resolution echelle spectrometer, IRCS, at the SUBARU 8.2 m telescope. The full width at half maximum of the point spread function was about 0.3 arcsec by using an Adaptive Optics system, which can effectively resolve the quasar spectra from the host galaxy spectra. The signal-to-noise ratios are increased by the total exposure time up to several hours per targets and the development of data reduction method. We compare our results to the stellar spectra library and sample spectra from Dasyra et al. (2007) and Watson et al. (2008). The identified spectral lines will be used to study the physical mechanism of quasars, and the velocity dispersions of the stars in the bulge of the host galaxy.

  • PDF

Crystallization of a-Si Induced by Ni-Si oxide source

  • Meng, Z.;Liu, Z.;Zhao, S.;Wu, C.;Wong, M.;Kwok, H.;Xiong, S.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2008년도 International Meeting on Information Display
    • /
    • pp.985-988
    • /
    • 2008
  • Metal induced crystallization of a-Si with a source of Ni/Si oxide was studied. Its mechanism to induce crystallization was discussed. It was found that new source behaves an effect of self-released nickel and reducing nickel residua, so can provide a wider process tolerance; improve the uniformity and stability of TFTs.

  • PDF

HIGH RESOLUTION NEAR-INFRARED SPECTRA OF NEARBY QUASAR, PG1426+015

  • ;;임명신
    • 천문학회보
    • /
    • 제37권1호
    • /
    • pp.51.1-51.1
    • /
    • 2012
  • We observed low-z quasar PG1426+015 (z=0.086), using the near-IR high resolution echelle spectrometer, IRCS, at the SUBARU 8.2 m telescope. Using an Adoptive Optics system, the full width at half maximum of the point spread function was about 0.3 arcsec, which can effectively separate the quasar spectra from the host galaxy spectra. We also maximize the total exposure time up to several hours per target, and develop data reduction methods to increase the signal-to-noise ratios. This poster presents the data reduction processes and sample spectra from the quasar and its host galaxy. These spectral lines will be used to study the physical mechanism of quasars, and the velocity dispersions of the stars in the bugle of the host galaxy.

  • PDF

SCM 440 강재의 동적 재결정 조직 변화에 관한 연구 (The Evolution of Dynamically Recrystallized Microstructure for SCM 440)

  • 한형기;유연철
    • 소성∙가공
    • /
    • 제10권1호
    • /
    • pp.35-41
    • /
    • 2001
  • The high temperature deformation behavior of SCM 440 can be characterized by the hot torsion test in the temperature ranges of $900^{\circ}C$~$1100^{\circ}C$ and strain rate ranges of 0.05/sec~5/sec. The aim of this paper is to establish the quantitative equation of the volume fraction of dynamic recrystallization (DRX) as a function of processing variables, such as strain rate ($\varepsilon$), temperature (T), and strain ('$\varepsilon$). During hot deformation, the evolution of microstructure could be analyzed from work hardening rate ($\theta$). For the exact prediction of dynamic softening mechanism the critical strain ($\varepsilon_c$), the strain for maximum softening rate ($\varepsilon^*$ and Avrami' exponent (m') were quantitatively expressed by dimensionless parameter, Z/A, respectively. The transformation-effective strain-temperature curve for DRX could be composed. It was found that the calculated results were agreed with the experimental data for the steel at any deformation conditions.

  • PDF