• Journal of the Korean Ceramic Society
• /
• v.56 no.2
• /
• pp.111-129
• /
• 2019

Recently, all-solid-state batteries (ASSBs) have attracted increasing interest owing to their higher energy density and safety. As the core material of ASSBs, the characteristics of the solid electrolyte largely determine the performance of the battery. Thus far, a variety of inorganic solid electrolytes have been studied, including the NASICON-type, LISICON-type, perovskite-type, garnet-type, glassy solid electrolyte, and so on. The garnet Li₇La₃Zr₂O₁₂ (LLZO) solid electrolyte is one of the most promising candidates because of its excellent comprehensively electrochemical performance. Both, experiments and theoretical calculations, show that cubic LLZO has high room-temperature ionic conductivity and good chemical stability while contacting with the lithium anode and most of the cathode materials. In this paper, the crystal structure, Li-ion transport mechanism, preparation method, and element doping of LLZO are introduced in detail based on the research progress in recent years. Then, the development prospects and challenges of LLZO as applied to ASSBs are discussed.

• Applied Chemistry for Engineering
• /
• v.17 no.2
• /
• pp.125-131
• /
• 2006

Dimethyl ether (DME) is a new clean fuel as an environmentally-benign energy resource. DME can be manufactured from various energy sources including natural gas, coal, biomass and spent plastic. In addition to its environmentally friendly properties, DME has similar characteristics to those of LPG. Therefore, it is considered as an excellent substitute fuel for LPG, fuel cells, power plant, and especially diesel and is expected to be the alternative fuel by 2010. The experimental study of the direct synthesis of DME was investigated under various conditions over a temperature range of $220{\sim}280^{\circ}C$, syngas ratio 1.2~3.0. All experiments were carried out with a hybrid catalyst, composed of a methanol synthesis catalyst ($Cu/ZnO/Al_2O_3$) and a dehydration catalyst (${\gamma}-Al_2O_3$). The observed reaction rate follows qualitatively a Langmiur-Hinshellwood model as the reaction mechanism. Such a mechanism is considered with three reactions; methanol synthesis, methanol dehydration and water gas shift reaction. From a surface reaction with dissociative adsorption of hydrogen, methanol, and water, individual reaction rate was determined.

• Nutritional Sciences
• /
• v.3 no.2
• /
• pp.57-65
• /
• 2000

Partial enteral nutrition (PEN) supplemented with insulin-like growth factor-I (IGF-I) to neonatal piglets receiving parenteral nutrition increases lactase-phlorizin hydrolase (LPH) activity, but not LPH mRNA. The goal of the current study was to investigate the mechanism by which IGF-I up-regulates LPH activity. We hypothesized that IGF-I regulates LPH synthesis post-transcriptionally. Methods: Newborn piglets (n=15) received 100% parenteral nutrition (TPN), 80% parenteral nutrition + 20% PEN (PEN), or PEN + IGF-I (1.0mg/kg/d). On day 7, two stable isotopes of leucine, [$^2 H_3$]-leucine and [$^{13}C_1$]-L-leucine were intravenously administered to measure mucosal protein and brush LPH (BB LPH) synthesis. Results: Weight gain, nutrient intake and jejunal weight and length were similar among the treatment groups. PEN increased mucosal weight, villus width and cross-sectional area, LPH activity, mRNA expression and the abundance of proLPHh compared to 100% TPN (p<0.05). IGF-I further increased mucosal weight, LPH activity and LPH activity per unit BB LPH ~2-fold over PEN alone (p<0.05), but did not affect LPH mRNA or the abundance of proLPHh or mature LPH. Isotopic enrichment of [$^2 H_3$]-leucine and [$^{13}C_1$]-L-leucine in plasma, mucosal protein and LPH precursors, and the fractional and absolute synthesis rates of mucosal protein and LPH were similar among the treatment groups. Total mucosal protein synthesis was increased 60% (p<0.05) and LPH synthesis tended (p=0.14) to be greater in the IGF-I treated animals compared to the other two groups. Conclusions: The primary mechanism by which IGF-I up-regulates LPH may be post-translational, either via reducing LPH turnover, or by specifically altering LPH activity.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1482-1487
• /
• 2003

This paper presents a new family of 4-DoF parallel mechanism with two platforms. The new mechanism is composed of front and rear platforms, and three limbs. Two limbs with 6dof joint (P-P-S-P) are attached to the each platform and are perpendicular to baseplate, while the middle limb with 4-Dof joints (R-R-R-P or R-R-P-P) is attached to the revolute joint that connect front and rear platform. The two-DoF-driving mechanism at the middle limb with two base-fixed prismatic actuators can generate the heaving and roll motions or two translational motions. Therefore, Therefore, the new 4-Dof parallel mechanism (1T-3R) can generate pitch motions at each platforms, roll, and heaving motions, while another type of new 4-Dof parallel mechanism (2T-2R) can generate pitch motions at each platforms, x and z translational motions. For 1T-3R mechanism, kinematic analyses including inverse, forward kinematics, and Jacobian are performed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.9
• /
• pp.720-725
• /
• 2013

Nylon wire cutting method by nichrome wire is generally applicable for cube satellite applications due to its advantages of simplicity. However, the system complexity is not avoidable to apply it on the cube satellite with multi-deployable structures. A lower constraint force of the mechanism is also one of the disadvantages of the mechanism. In this study, we proposed a preliminary structure design of cube satellite with the separation mechanism which is applicable for holding and release of the multi-deployable structures. The effectiveness of the mechanism design was verified through function test of EM mechanism. The structure analysis results showed that the structure design proposed in this study is feasible.

• Toxicological Research
• /
• v.32 no.2
• /
• pp.95-102
• /
• 2016

In the recent years, noble nanoparticles have attracted and emerged in the field of biology, medicine and electronics due to their incredible applications. There were several methods have been used for synthesis of nanoparticles such as toxic chemicals and high energy physical procedures. To overcome these, biological method has been used for the synthesis of various metal nanoparticles. Among the nanoparticles, silver nanoparticles (AgNPs) have received much attention in various fields, such as antimicrobial activity, therapeutics, bio-molecular detection, silver nanocoated medical devices and optical receptor. Moreover, the biological approach, in particular the usage of natural organisms has offered a reliable, simple, nontoxic and environmental friendly method. Hence, the current article is focused on the biological synthesis of silver nanoparticles and their application in the biomedical field.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.620-623
• /
• 2001

The peculiarities of using Self-propagating High-temperature Synthesis (SHS) and solid state phase synthesis for production of high temperature superconductor materials are discussed. Oxide superconductors with general formula $ReBa_2$$Cu_3$$O_{7-x}$ (Re= Y, Yb, Sm, Nd) have been made with using barium oxide initial powder instead of traditional barium carbonate. X-ray powder diffraction showed a single phase orthorhombic perovskite structure was produced in all reactions. Phenomena observed during the grinding of the reactant mixture are presented. Mechano-chemical activation - as a pretreatment of the reactant mixture - strongly influences the kinetic parameters, the reaction mechanism, and the composition and structure of the final product.

• Journal of Food Hygiene and Safety
• /
• v.8 no.4
• /
• pp.181-188
• /
• 1993

It is well known that bacterial lipopolysaccharide (LPS) stimulates the prostaglandin (PG) synthesis in various experimental system, but the mechanism and the detailed nature of its action are yet to be understood. Thus, this study was designed to characterize LPS induced PG synthesis in rat alveolar macrophage. Although results were not so much prominent, LPS stimulated PGE2 synthesis in macrophage with short term exposure, and this was thought to be mainly due to the activation of phopholipase A2+ But there was a burst in the PG synthesis 6 hours after the LPS treatment and this was accompanied with the increase of cyclooxygenase activity. This effect was not mediated by tumor necrosis factor (TNF) or platelet activating factor (PAF), and the existence of serum was prerequisite for its action. Growth factors such as epidermal growth factor (EGF) and platelet derived growth factor (PDGF) themselves did not stimulate PG synthesis and the showed stimulatory activities to some extent. Normal rat serum was more effective for the elicitation of the LPS action than growth factors. Thus, considering the amounts of growth fafctors contained in normal serum, it was suggested that another factors like LPS binding protein (LBP) might be involved in the serum effect on LPS action. Conclusively. it was thought that LPS could stimulate PG synthesis through interaction with serum factors such as EGF, PDGF and/or LBP.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.5
• /
• pp.430-436
• /
• 2014

The mission objective of STEP Cube Lab. (Cube Laboratory for Space Technology Experimental Project) classified as a pico-class satellite is to verify the technical effectiveness of payloads such as variable emittance radiator, SMA washer, oscillating heat pipe and MEMS based solid propellant thruster researched at domestic universities. In addition, the MEMS concentrating photovoltaic power system and the non-explosive holding and separation mechanism with the advantages of high constraint force and low shock level will be developed as the primary payloads for on-orbit verification. In this study, the feasibility of the mission actualization has been confirmed by the preliminary system design.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.334-339
• /
• 1994

In this work, we propose a planar three degree-of-freedom parallel mechanism as another type of assembly device which utilized joint compliances. These joint compliances can be adjusted either by properly replacing the joint compliances or by actively controlling stiffness at joints, in order to generate the desired operational compliance characteristics at RCC point, The operational compliance matrix for this mechanism is explicitly obtained by symbolic manipulation and its operational compliance characteristics are examined, it is found that the RCC point exists at the center of the workspace when the mechanism maintains symmetric configurations. Compliance characteristic and its sensitivity of this mechanism is analyzed with respect to the magnitude of the diagonal compliance components and two different matrix norms measuring compliance sensitivity. It is expected that the analysis results provide the designer with a helpful information to determine a set of optimal parameters of this RCC mechanism.